Casio Edifice ECB-10 manual

Casio Edifice ECB-10
9 · 1
PDF manual
 · 29 pages
English
manualCasio Edifice ECB-10

Viewing the Face in the Dark

The watch has an LED light that you can turn
on for reading in the dark.
To illuminate the face manually
Press (A) to turn on illumination.
Illumination will turn off automatically if an
alarm starts to sound.
To illuminate the face when Auto Light
is enabled
If Auto Light is enabled, face illumination will
turn on automatically whenever the watch is
positioned at an angle of 40 degrees or more.
40
degrees
or more
Important!
Auto Light may not operate properly
when the watch is at a horizontal angle
of 15 degrees or greater from
horizontal as shown in the illustration
below.
Electro-static charge or magnetism
can interfere with proper auto light
operation. If this happens, try lowering
your arm and then angle it towards
your face again.
When moving the watch you may note
a slight rattling sound. This is due to
operation of the auto light switch,
which determines the current
orientation of the watch. It does not
indicate malfunction.
Note
Auto Light is disabled when any one of
the conditions below exists.
ー 
Alarm, timer alert, or other beeper
sounding
Configuring the Auto Light Setting
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3. Press (C) 13 times to display [AUTO].
4. Press (D) to toggle Auto Light between
enable and disable.
[ON]: Illumination turns on when the watch
is angled towards the face.
[OFF]: Illumination does not turn on when
the watch is angled towards the face.
5. Press (B) to complete the setting
operation.
[LT] is displayed while Auto Light is
enabled.
If you do not disable it manually, Auto
Light remains enabled for
approximately six hours. After that, it
becomes disabled automatically.
On
Note
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Specifying the Illumination Duration
You can select either 1.5 seconds or three
seconds as the illumination duration.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3. Press (C) 14 times to display [LIGHT].
4. Press (D) to select an illumination
duration.
[1]: 1.5-second illumination
[3]: 3-second illumination
5. Press (B) to exit the setting screen.
Note
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.

Watch Operation Guide 5686

8

View the manual for the Casio Edifice ECB-10 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Casio Edifice ECB-10 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
L
Laz Jackson October 1, 2023

How do i set atch to display day and date. I already have it set on Bangkok time and digital display is currently showing the time

T
Tore SubasiSeptember 30, 2023

Alarm and hourly signal doesn't work. Both settings are ok. Checked with android app as well. My watch is 3 months old and first month everything was ok. Battery is also ok because light is very strong and settings beeps are also working. I tried everything but no go. Pls help..

L
Larry BranzuelaFebruary 28, 2023

Why is the casio edifice bluetooth ecb-10 is not working all buttons?

Y
YashSeptember 26, 2023

How to off my Bluetooth symbol on my watch

1 comment
T
Tore SubasiSeptember 30, 2023

Use airplane mode.

The Casio Edifice ECB-10 is a smartwatch designed to provide users with a range of efficient and convenient features. With its sleek and modern design, it offers a stylish accessory for individuals looking for a smartwatch that seamlessly blends functionality and fashion. Equipped with advanced technology, the Edifice ECB-10 boasts a range of impressive features. It offers smartphone connectivity, allowing users to receive call and message notifications directly on their wrist. Additionally, it provides access to various apps and functions, such as a world time display, stopwatch, timer, and alarm. The Edifice ECB-10 also offers impressive water resistance, ensuring it can withstand everyday activities and occasional water exposure. Its durable construction and high-quality materials make it reliable and long-lasting, allowing users to confidently wear it in various environments. Furthermore, this smartwatch features a clear and easy-to-read display, ensuring that users can effortlessly access and navigate its functions and features. Its intuitive interface and user-friendly design make it a practical choice for individuals seeking a smartwatch that is easy to use and understand. In summary, the Casio Edifice ECB-10 is a technologically advanced smartwatch that offers users an array of convenient features. With its stylish design, water resistance, and user-friendly interface, it is a reliable and efficient accessory for individuals seeking a practical smartwatch.

General
BrandCasio
ModelEdifice ECB-10
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice ECB-10 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I change the time and date on my Casio Edifice ECB-10?

To change the time and date on your Casio Edifice ECB-10, press and hold the Mode button until the watch enters the setting mode. Use the B and D buttons to navigate and adjust the desired values. Press the Mode button once more to save the changes.

How can I set up and sync my Casio Edifice ECB-10 with my smartphone?

To set up and sync your Casio Edifice ECB-10 with your smartphone, first download the dedicated Casio Edifice Connected app from your app store. Open the app and follow the on-screen instructions to pair your watch via Bluetooth. Ensure that your phone's Bluetooth is turned on. Once connected, you'll be able to enjoy various smart features and receive notifications on your watch.

What should I do if the sensors on my Casio Edifice ECB-10 are not working properly?

If the sensors on your Casio Edifice ECB-10 are not working as expected, ensure that they are not obstructed by any dirt or debris. Try cleaning the sensors gently with a soft, lint-free cloth. If the issue persists, it may be necessary to reset the watch to factory settings. Please note that resetting the watch will erase all personalized settings.

How do I adjust the strap length on my Casio Edifice ECB-10?

To adjust the strap length on your Casio Edifice ECB-10, locate the small pins on the underside of the strap. Use a tool or small pin to push these pins inwards until they release from the holes. Slide the strap to the desired length and secure it by aligning the pins with the appropriate holes. Ensure that the strap is comfortably snug on your wrist.

What is the battery life of the Casio Edifice ECB-10 and how can I conserve it?

The battery life of the Casio Edifice ECB-10 can vary depending on usage. On a full charge, it can last approximately 2 years when used only as a timepiece. However, when actively using features like Bluetooth connectivity and sensors, the battery life may be reduced. To conserve battery, you can adjust the backlight duration, decrease the frequency of phone notifications, and disable unnecessary features when not in use.

Is the manual of the Casio Edifice ECB-10 available in English?

Yes, the manual of the Casio Edifice ECB-10 is available in English .

Is your question not listed? Ask your question here

No results