Casio Edifice ECB-10 manual

Casio Edifice ECB-10
9 · 1
PDF manual
 · 29 pages
English
manualCasio Edifice ECB-10

Measuring Lap Times

1. Enter the Stopwatch Mode.
l
Navigating Between Modes
If a stopwatch timing operation is in
progress, press (D) to stop it and then
press (B) to reset the stopwatch to all
zeros before performing the operation
in step 2.
2. Use the operations below to measure
elapsed time.
Each press of (B) displays, for about
eight seconds, the time elapsed (lap
time) since the last lap time operation.
D
B
D
Stop
Start
Lap
Elapsed time is shown in 1/1000-
second units for the first hour of the
measurement session. After the first
hour, elapsed time is shown in 1/10-
second units.
The mode hand points to the seconds
of the lap time. If more than 120 seconds
have elapsed since timing was started,
the mode hand points to [OVER].
1/1000 seconds Seconds, 1/10 seconds
Lap time seconds
After first hourFirst hour
Minutes, seconds
Hours, minutes
3. Press (B) to reset the stopwatch to all
zeros.

Example: Recording a Race

Lap Time

This section explains how to record lap times
while watching a race. It also shows how you
can view lap times with CASIO WATCHES
after the race is over.
l
Lap Times
During a race
Measure lap times.
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to perform a
timer operation.
D
B
B
D
Stop
Start
Pressing (B) at the end of each lap will
record them in watch memory.
Lap times are recorded in 1/1000-
second units during the first hour of an
elapsed time measurement session.
After one hour, times are recorded in
1/10-second units.
3. Press (B) to reset the elapsed time to all
zeros.
4. Hold down (C) for at least two seconds to
return to the Timekeeping Mode.
After a race
You can view the measured lap times with
CASIO WATCHES.
l
Sending Stopwatch Data to a Phone
l
Checking a Lap Time

Timer

The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper will not sound if battery power
is low.

Using CASIO WATCHES to

Configure Timer Settings

If the watch is paired with a phone, you can
also use CASIO WATCHES to set the timer
start time.
l
Configuring Timer Settings

Setting the Countdown Start

Time
The countdown start time can be set in 1-
second units up to 24 hours.
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Hold down (B) for at least two seconds.
Release the button when the hour setting
starts to flash.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Hours

Watch Operation Guide 5686

20

View the manual for the Casio Edifice ECB-10 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Casio Edifice ECB-10 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
L
Laz Jackson October 1, 2023

How do i set atch to display day and date. I already have it set on Bangkok time and digital display is currently showing the time

T
Tore SubasiSeptember 30, 2023

Alarm and hourly signal doesn't work. Both settings are ok. Checked with android app as well. My watch is 3 months old and first month everything was ok. Battery is also ok because light is very strong and settings beeps are also working. I tried everything but no go. Pls help..

L
Larry BranzuelaFebruary 28, 2023

Why is the casio edifice bluetooth ecb-10 is not working all buttons?

Y
YashSeptember 26, 2023

How to off my Bluetooth symbol on my watch

1 comment
T
Tore SubasiSeptember 30, 2023

Use airplane mode.

The Casio Edifice ECB-10 is a smartwatch designed to provide users with a range of efficient and convenient features. With its sleek and modern design, it offers a stylish accessory for individuals looking for a smartwatch that seamlessly blends functionality and fashion. Equipped with advanced technology, the Edifice ECB-10 boasts a range of impressive features. It offers smartphone connectivity, allowing users to receive call and message notifications directly on their wrist. Additionally, it provides access to various apps and functions, such as a world time display, stopwatch, timer, and alarm. The Edifice ECB-10 also offers impressive water resistance, ensuring it can withstand everyday activities and occasional water exposure. Its durable construction and high-quality materials make it reliable and long-lasting, allowing users to confidently wear it in various environments. Furthermore, this smartwatch features a clear and easy-to-read display, ensuring that users can effortlessly access and navigate its functions and features. Its intuitive interface and user-friendly design make it a practical choice for individuals seeking a smartwatch that is easy to use and understand. In summary, the Casio Edifice ECB-10 is a technologically advanced smartwatch that offers users an array of convenient features. With its stylish design, water resistance, and user-friendly interface, it is a reliable and efficient accessory for individuals seeking a practical smartwatch.

General
BrandCasio
ModelEdifice ECB-10
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice ECB-10 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I change the time and date on my Casio Edifice ECB-10?

To change the time and date on your Casio Edifice ECB-10, press and hold the Mode button until the watch enters the setting mode. Use the B and D buttons to navigate and adjust the desired values. Press the Mode button once more to save the changes.

How can I set up and sync my Casio Edifice ECB-10 with my smartphone?

To set up and sync your Casio Edifice ECB-10 with your smartphone, first download the dedicated Casio Edifice Connected app from your app store. Open the app and follow the on-screen instructions to pair your watch via Bluetooth. Ensure that your phone's Bluetooth is turned on. Once connected, you'll be able to enjoy various smart features and receive notifications on your watch.

What should I do if the sensors on my Casio Edifice ECB-10 are not working properly?

If the sensors on your Casio Edifice ECB-10 are not working as expected, ensure that they are not obstructed by any dirt or debris. Try cleaning the sensors gently with a soft, lint-free cloth. If the issue persists, it may be necessary to reset the watch to factory settings. Please note that resetting the watch will erase all personalized settings.

How do I adjust the strap length on my Casio Edifice ECB-10?

To adjust the strap length on your Casio Edifice ECB-10, locate the small pins on the underside of the strap. Use a tool or small pin to push these pins inwards until they release from the holes. Slide the strap to the desired length and secure it by aligning the pins with the appropriate holes. Ensure that the strap is comfortably snug on your wrist.

What is the battery life of the Casio Edifice ECB-10 and how can I conserve it?

The battery life of the Casio Edifice ECB-10 can vary depending on usage. On a full charge, it can last approximately 2 years when used only as a timepiece. However, when actively using features like Bluetooth connectivity and sensors, the battery life may be reduced. To conserve battery, you can adjust the backlight duration, decrease the frequency of phone notifications, and disable unnecessary features when not in use.

Is the manual of the Casio Edifice ECB-10 available in English?

Yes, the manual of the Casio Edifice ECB-10 is available in English .

Is your question not listed? Ask your question here

No results