Casio DB-360N-1AEF manual

Casio DB-360N-1AEF
8.9 · 3
PDF manual
 · 3 pages
English
manualCasio DB-360N-1AEF

Operation Guide 2515

2
6. After you input the name, press C as many times as necessary to move the cursor
to the number area.
When the cursor is located at the eighth space of the name area, moving the
cursor to the right causes it to jump to the first digit of the number. When the
cursor is at the 15th digit of the number, moving it to the right (by pressing C)
causes it to jump to the first character in the name.
Pressing C moves the cursor the right, while B moves it to the left.
7. In the number area, use E and D to cycle through numbers and symbols
(hyphen, brackets, space) at the cursor position. The characters cycle in the
sequence shown below.
8. When the character you want is at the cursor position, press C to move the cursor
to the right.
9. Repeat steps 7 and 8 until you complete number input.
You can input up to 15 digits for the number.
The number initially contains all hyphens. You can leave the hyphens as they are
or replace them with numbers or other symbols (brackets, space).
10. Press A to store your data and return to the Data Bank record screen (without
the cursor).
When you press A to store data, the name and number you input flash for about
one second as Data Bank records are sorted. After the sort operation is complete,
the Data Bank record screen appears.
The name can show only three characters at a time, so longer text scrolls
continuously from right to left. The last character is indicated by the symbol
after it.
To recall Data Bank records
In the Data Bank Mode, use E (+) and D () to scroll through Data Bank records on
the display.
Pressing E while the last Data Bank record is on the display or D while the first
record is on the display displays the new data screen.
To edit a Data Bank record
1. In the Data Bank Mode, use E (+) and D () to scroll through the records and
display the one you want to edit.
2. Hold down A until the flashing cursor appears on the display.
3. Use C (right) and B (left) to move the flashing to the character you want to
change.
4. Use E (forward) and D (back) to change the character.
5. After making the changes that you want, press A to store them and return to the
Data Bank record screen.
To delete a Data Bank record
1. In the Data Bank Mode, use E (+) and D () to scroll through the records and
display the one you want to delete.
2. Hold down A until the flashing cursor appears on the display.
3. Press B and C at the same time to delete the record.
The message
CLR appears to indicate that the record is being deleted. After the
record is deleted, the cursor appears on the display, ready for input.
4. Input data or press A to return to the Data Bank record screen.

Alarms

You can set up to five independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. You can select either a one-time alarm or snooze
alarm that repeats up to seven times, every five minutes.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
There are five alarms numbered1 through 5. You can
configure Alarm1 as a snooze alarm or a one-time-
alarm. Alarms 2 through 5 can be used as one-time
alarms only.
Alarm settings (and Hourly Time Signal settings) are
available in the Alarm Mode, which you enter by
pressing B.
Alarm Types
The alarm type is determined by the settings you make, as described below.
Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
to sound every month at the time you set, on the day you set.
To set an alarm time
1. In the Alarm Mode, use E and D to scroll through the
alarm screens until the one whose time you want to set
is displayed.
Each of the five alarm screens has an alarm number.
The hourly time signal screen does not have an alarm
number.
2. After you select an alarm, hold down A until the hour
setting of the alarm time starts to flash, which indicates
the setting screen.
This operation automatically turns on the alarm.
0 to 9
x
[ ]
(space)
Press E.
Press D.
Alarm time
(Hour : Minutes)
Alarm number
Alarm date
(MonthDay)
Timekeeping
Mode time
Alarm number
Alarm1 Alarm 2 Alarm 3
Time
Signal
Alarm 5 Alarm 4
Press E. Press D.
3. Use C and B to move the flashing in the sequence shown below to select other
settings.
4. While a setting is flashing, use E (+) and D () to change it.
To set an alarm that does not include a month (Daily alarm, Monthly alarm), set x
for the month. Use E and D until the x mark appears (between 12 and 1) while
month setting is flashing.
To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set xx
for the day. Use E and D until the xx mark appears (between the end of the
month and 1) while the day setting is flashing.
When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (A indicator) or p.m. (P indicator).
5. Press A to exit the setting screen.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm repeats up to seven times
every five minutes until you turn the alarm off or change it to a one-time alarm.
Pressing any button stops the alarm tone operation.
Any time you display the setting screen while the Alarm1 screen is on the display,
Alarm1 automatically becomes a one-time alarm.
Displaying the Timekeeping Mode setting screen during a 5-minute interval between
snooze alarms stops the current snooze alarm operation (but snooze alarm remains
as the alarm type setting).
To test the alarm
In the Alarm Mode, hold down C to sound the alarm.
To turn Alarms
2
through
5
and the hourly time signal on and off
1. In the Alarm Mode, use E and D to select a one-time
alarm (alarm number 2 through 5) or the Hourly Time
Signal.
2. Press C to toggle it on and off.
The on/off status of Alarms 2 through 5 is shown by
indicators along the bottom of the displays (
= on).
The SIG indicator shows the on (displayed)/off (not
displayed) status of the hourly time signal.
The alarm on indicators and hourly time signal indicator
are displayed in all modes.
While an alarm is sounding, the applicable alarm on
indicator flashes on the display.
To select the operation of Alarm
1
1. In the Alarm Mode, use E and D to select Alarm1.
2. Press C to cycle through the available settings in the sequence shown below.
The SNZ indicator and Alarm1 on indicator are displayed in all modes.
The SNZ indicator flashes during the 5-minute intervals between alarms.
The alarm indicator (Alarm1 on and/or SNZ) flashes while the alarm is sounding.

Stopwatch

The stopwatch lets you measure elapsed time, split times,
and two finishes.
The display range of the stopwatch is 23 hours, 59
minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B.
To measure times with the stopwatch
Minutes
Hour
Month Day
Press C.
Press B.
Alarm on indicators
Hourly time signal
on indicator
SNZ indicator and Alarm1 on indicator
Snooze alarm onOne-time alarm on
Alarm off
Press C.
Hours
Minutes
Seconds
Timekeeping
Mode time
1/100 second
C
Start Stop
Elapsed Time
Re-start Clear
C
Stop
C
C
A
Split Time
C
Start Split
Split release
Clear
A
Stop
A
C
A
Two Finishes
C
Start Split
Stop
Clear
A
Split release
C
A
A
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
(SPL displayed)
s

View the manual for the Casio DB-360N-1AEF here, for free. This manual comes under the category Watches and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Casio DB-360N-1AEF or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Casio owners to provide you with a good answer.

Number of questions: 0

General
Casio
DB-360N-1AEF | DB-360N-1AEF
Watch
4971850762171
English
User manual (PDF)
Technical details
Stopwatch
Timer1/1min - 24h
Alarm function
Calendar
LED backlight
Accuracy±30 sec/month
Snooze function
Clock mode12h/24h
Design
Band materialStainless steel
Watch case materialResin
Power
Battery typeCR2025
Battery life10 year(s)
Number of batteries supported1
Other features
Dimensions (WxDxH)37.7 x 10.4 x 43.1 mm
Weight & dimensions
Weight58 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio DB-360N-1AEF below.

Is your question not listed? Ask your question here

No results