Casio 5636 manual

Casio 5636
7.5 · 1
PDF manual
 · 23 pages
English
manualCasio 5636

Troubleshooting

Signal Reception (Time

Calibration Signal)

Q1
The watch cannot perform a receive
operation.
Is the watch’s battery charged?
Signal reception is not possible while
battery power is low. Keep the watch
exposed to light until it recharges
sufficiently.
l
Solar Charging
Is the watch in the Calendar Mode?
The watch cannot receive time calibration
signals while the Airplane Mode is
enabled or while the watch is in a mode
other than the Calendar Mode. Return to
the Calendar Mode.
l
Navigating Between Modes
l
Using the Watch in a Medical Facility or
Aircraft
Is your time zone setting correct for your
location?
The watch will not indicate the correct time
if the time zone setting is wrong. Change
your time zone setting so it is correct for
your location.
l
Selecting Your Home City’s Time Zone
Is the watch paired with a phone?
The time calibration signal auto receive
operation is not performed while the
watch is paired with a phone. (However,
time signal auto receive is performed if
there has been no time adjustment based
on connection between the watch and
phone for more than one day.)
Also, a manual time calibration signal
receive operation cannot be performed
while the watch is paired with a phone.
When you want to enable time calibration
signal reception without using a phone,
unpair the watch from your phone.
l
Unpairing
After checking the above, the watch still
cannot perform a receive operation.
Time calibration signal reception is not
possible under the conditions described
below.
While the watch is at Level 3 power
saving
When the crown is pulled out
Timer countdown operation in progress
If successful reception is not possible for
some reason, you can adjust the time and
day settings manually.
Q2
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
l
Appropriate Signal Reception Location
Did you avoid touching the watch while the
receive operation was in progress?
Minimize movement of the watch and do
not perform any watch operation while a
receive operation is in progress.
Is there an alarm configured to sound
during the same period that the signal
receive operation is performed?
Receive stops if an alarm operation starts
while it is being performed. Disable the
alarm.
l
Turning Off the Alarm
Is the signal transmitter in your area
transmitting a signal?
The transmitter of the time calibration may
not be transmitting a signal.
Try again later.
Q3
Signal reception should have been
successful, but the watch’s time and/
or day is wrong.
Is the indicated time off by one hour or by
30 minutes?
The watch may be using the wrong time
offset. Correctly specify the time zone
where you are using the watch.
l
Selecting Your Home City’s Time Zone
Is the indicated hour and/or minute wrong?
The hour hand and/or minute hand may
be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to auto adjust
hour and minute hand alignment.
l
Adjusting Hand and Day Indicator
Alignment
Is the indicated day of the week wrong?
The day of the week hand (mode hand)
may be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to adjust mode
hand alignment.
l
Adjusting Hand and Day Indicator
Alignment
Is the indicated Dual Time and/or alarm
time wrong?
The Dual Time and/or alarm time hands
(small hour hand, small minute hand) may
be out of alignment. Perform the
procedure under “Adjusting Hand and
Day Indicator Alignment” to adjust small
hour hand and small minute hand
alignment.
l
Adjusting Hand and Day Indicator
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
l
Using Watch Operations to Adjust the
Time Setting

Watch Operation Guide 5636

20

View the manual for the Casio 5636 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio 5636 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
Model5636
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 5636 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio 5636 available in English?

Yes, the manual of the Casio 5636 is available in English .

Is your question not listed? Ask your question here

No results