Casio 5412 manual

Casio 5412
7.1 · 1
PDF manual
 · 12 pages
English
manualCasio 5412
Getting ready
The receive operation is performed only while
the
watch
is in the Timekeeping Mode (normal
timekeeping).
Normally the mode hand points to the
current day of the week.
l Navigating Between Modes
30
Mode
hand
1.
Move to a location appropriate for signal
reception and orient the watch so its
display is pointed straight up at the sky.
2.
Hold down (B) for at least three seconds.
Release
the
button as soon as the second
hand points to “T+P”.
The second hand will move in the
following sequence: “Y(YES)” or
“N(NO)” n “T (TIME)” n “T+P”.
This indicates that position information
acquisition has started.
30
Second hand
If position information acquisition is
successful, the second hand will move
to “Y(YES)” and then the watch will
automatically adjust its time and day
settings.
30
If position information acquisition fails
for some reason, the second hand will
move to “N(NO)” and then the watch will
indicate the current time and day
without adjusting them.
Note
Reception takes anywhere from
about 30 seconds to about two
minutes.
It can take as long as 13 minutes
when leap second information is
included.
You may experience location
information acquisition problems
when
you
are in the vicinity of a time
zone borderline.
The watch’s time and day will not be
indicated correctly if the Home City
(Time Zone) setting is not right for
your location. Perform position
information acquisition in a
representative city in your time zone
or in a location that is well within the
time zone. Or you can perform a time
information receive operation to
adjust time and day settings after
configuring Home City (Time Zone)
and summer time settings manually.
l Selecting a Time Zone
l Acquiring GPS Time Information
Manually

Acquiring GPS Time Information

Manually

You can use a button operation on the watch
to receive
GPS signal time information. When
the receive operation is successful, the
watch’s Home City (time zone), day, and time
settings will be adjusted accordingly.
Note
GPS signal reception requires large
amounts of power. Perform it only
when necessary.
Getting ready
The receive operation is performed only while
the
watch
is in the Timekeeping Mode (normal
timekeeping).
Normally the mode hand points to the
current day of the week.
l Navigating Between Modes
30
Mode
hand
1.
Move to a location appropriate for signal
reception and orient the watch so its
display is pointed straight up at the sky.
2.
Hold down (B) for at least one second.
Release
the
button as soon as the second
hand points to “T (TIME)”.
The second hand will move in the
following sequence: “Y(YES)” or
“N(NO)” n “T (TIME)”.
This indicates that time information
receipt has started.
30
Second hand
If information acquisition is successful,
the second
hand will move to “Y(YES)”,
and then the watch will automatically
adjust its time and day settings.
30
If reception fails for some reason, the
second hand will move to “N(NO)” and
then the watch will indicate the current
time and day without adjusting them.
Note
Reception takes anywhere from
about seven seconds to about one
minute.
It can take as long as 13 minutes
when leap second information is
included.

Operation Guide 5412

4

Manual

View the manual for the Casio 5412 here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Casio 5412 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Casio 5412 specifications

Below you will find the product specifications and the manual specifications of the Casio 5412.

General
BrandCasio
Model5412
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 5412 below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

Is the manual of the Casio 5412 available in English?

Yes, the manual of the Casio 5412 is available in English .

Is your question not listed? Ask your question here

No results