Casio 4713 manual

Casio 4713
7.3 · 2
PDF manual
 · 5 pages
English
manualCasio 4713

Operation Guide 4709 4713

1
MO0907-EB
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright light.
Be sure to read “Power Supply” of this manual for important information you
need to know when exposing the watch to bright light.
Keep the watch exposed to bright light
The electricity generated by the solar cell of the watch is
stored by a built-in battery. Leaving or using the watch where
it is not exposed to light causes the battery to run down.
Make sure the watch is exposed to light as much as possible.
When you are not wearing the watch on your wrist,
position the face so it is pointed at a source of bright light.
You should try to keep the watch outside of your sleeve
as much as possible. Charging is reduced significantly if
the face is only partially covered.
l
l
l
l
l
l
l
l
l
l
l
Bright Light
Solar cell
The watch continues to operate, even when it is not exposed to light. Leaving the
watch in the dark can cause the battery to run down, which will result in some watch
functions to be disabled. If the battery goes dead, you will have to re-configure watch
settings after recharging. To ensure normal watch operation, be sure to keep it
exposed to light as much as possible.
All
functions
enabled
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
Charge
Rechargeable battery
Bright Light
Electrical
energy
Solar cell
(Converts light to
electrical power.)
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
Some or all
functions
disabled
Dis-
charge
Battery charges in the light. Battery discharges in the dark.
The actual level at which some functions are disabled depends on the watch model.
Be sure to read Power Supply for important information you need to know
when exposing the watch to bright light.
If the display of the watch is blank...
If the display of the watch is blank, it means that the watch’s Power Saving function
has turned off the display to conserve power.
See Power Saving Function for more information.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of this
product or its malfunction.
About This Manual
The operational procedures for Modules 4709 and 4713
are identical. All of the illustrations in this manual show
Module 4713.
Most of the display examples in this manual show only
the digital display, without the analog hands.
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Module 4709
Module 4713
Dual Time Mode
Alarm ModeStopwatch Mode
General Guide
Press B to change from mode to mode.
In any mode (except when a setting screen is on the display), press A to illuminate
the display.
When setting the time, you can also configure settings for the language of the day of
the week indicator (English or Japanese).
Press B.
Battery Level Indicator
Hand Setting Mode
Last signal screen
Timekeeping Mode
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and updates
its time setting accordingly.
Supported time calibration signals: Germany
(Mainflingen), England (Anthorn), United States (Fort
Collins), Japan.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
The first thing you should do after purchasing this watch
is to specify your Home Time Zone, which is the time
zone where you normally will use the watch. For more
information, see “To specify your Home Time Zone”.
Day of week
Seconds
Date
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See “Timekeeping”
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
The analog time of this watch is synchronized with the digital time. Because of this,
the analog time setting is automatically adjusted whenever you change the digital
setting. See “Analog Timekeeping” for more information.
To specify your Home Time Zone
1. In the Timekeeping Mode, hold down A the UTC
differential value starts to flash, which indicates the
setting screen.
Though illumination will also turn on when you press
A, keep the button held down until UTC differential
value flashes.
2. Press C to select the time zone you want to use as
your Home Time Zone.
Time calibration signal reception is supported when
any one of the time zones shown in the table below is
selected as your Time Zone.
Time zone
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
U.S. Signal
UTC differential value
UTC –10
UTC –9
UTC –8
UTC –7
UTC –6
UTC –5
Japan Signal
UTC differential value
UTC +8
UTC +9
German/U.K. Signal
UTC differential value
UTC +0
UTC +1
UTC +2
3. Press A to exit the setting screen.
Important!
Normally, your watch should show the correct time as soon as you select your Home
Time Zone. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between time zones and transmitters, see “Home
Time Zones and Transmitters”.
Under factory default settings, auto receive is turned off for all of the following time
zones : UTC +8, UTC –10, and UTC –9. For details about turning on auto receive for
these time zones, see “To turn auto receive on and off”.
You can disable time signal reception, if you want. See “To turn auto receive on and
off” for more information.
See the maps under “Approximate Reception Ranges” for information about the
reception ranges of the watch.
If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see “About Auto Receive”.
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.

Manual

View the manual for the Casio 4713 here, for free. This manual comes under the category watches and has been rated by 2 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Casio 4713 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Casio 4713 specifications

Below you will find the product specifications and the manual specifications of the Casio 4713.

The Casio 4713 is a wristwatch produced by Casio, a renowned manufacturer of digital timepieces. This watch features a digital display that shows the time in a clear and easy-to-read format. It is designed to be worn on the wrist, with a comfortable and adjustable strap that ensures a secure fit. The Casio 4713 is equipped with a variety of useful features. It has a built-in alarm clock function, allowing users to set multiple alarms for different purposes. Additionally, it has a stopwatch feature, enabling users to accurately measure elapsed time for various activities. This watch is also water-resistant, meaning it can withstand exposure to water to a certain extent. This feature ensures that the watch remains functional even if it gets splashed or worn in wet conditions. The Casio 4713 is powered by a long-lasting battery, providing ample runtime before requiring a replacement. This eliminates the need for frequent battery changes, enhancing convenience for the user. The design of the Casio 4713 is simple and stylish, with a minimalistic appearance that complements any outfit or occasion. It is available in different color options, allowing users to choose the one that best suits their personal style. Overall, the Casio 4713 is a reliable and practical wristwatch that offers essential timekeeping features in a durable package.

General
BrandCasio
Model4713
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 4713 below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

How do I set the time on my Casio 4713 watch?

To set the time on your Casio 4713 watch, locate the mode button on the watch and press it until the time display starts flashing. Use the up and down buttons to adjust the hours and minutes, and then press the mode button again to save the changes.

Why does my watch display show incorrect date?

If the date on your Casio 4713 watch is incorrect, you may need to adjust the date setting. Press and hold the mode button until the watch enters the settings mode, then navigate to the date setting using the up and down buttons. Adjust the date and press the mode button to save the changes.

How can I change the battery on my Casio 4713 watch?

To change the battery on your Casio 4713 watch, it is recommended to take it to an authorized Casio service center or a professional watch repair shop. They have the necessary tools and expertise to safely replace the battery without damaging the watch.

How can I switch between different time zones on my Casio 4713 watch?

To switch between different time zones on your Casio 4713 watch, press the mode button until the time display starts flashing. Use the up or down buttons to select the desired time zone. Once selected, press the mode button again to save the changes and switch to the new time zone.

What should I do if my Casio 4713 watch is not functioning properly?

If your Casio 4713 watch is not functioning properly, you can try performing a basic reset. Locate the reset button, usually positioned on the back of the watch, and use a small pointed object to press and hold it for a few seconds. This will reset the watch to its default settings and may resolve any functionality issues. However, if the problem persists, it is recommended to contact Casio customer support for further assistance.

Is the manual of the Casio 4713 available in English?

Yes, the manual of the Casio 4713 is available in English .

Is your question not listed? Ask your question here

No results