Casio 4305 manual

Casio 4305
7.5 · 1
PDF manual
 · 4 pages
English
manualCasio 4305

Operation Guide 4304 4305

2
Under good reception conditions, signal reception is possible within a radius of
about 2,000 miles (3,000 kilometers) from the Fort Collins (the United States)
transmitter.
At distances further than about 600 miles (1,000 kilometers) from the Fort Collins
(the United States) transmitter, signal reception may not be possible during certain
times of year or times of day. Radio interferance may also cause problems with
reception.
Under good reception conditions, signal reception is possible within a radius of
about 1,000 kilometers (600 miles) from the Fukushima and Fukuoka/ Saga (Japan)
transmitter.
At distances further than about 500 kilometers (310 miles) from the Fukushima and
Fukuoka/ Saga (Japan) transmitter, signal reception may not be possible during
certain times of year or times of day. Radio interferance may also cause problems
with reception.
See the information under “Signal Reception Troubleshooting” if you experience
problems with time calibration signal reception.
About Auto Receive
The watch receives the time calibration signal automatically up to five times a day.
When any auto receive is successful, the remaining auto receive operations are not
performed. The reception schedule (calibration times) depends on your currently
selected Home Time Zone, and whether standard time or Daylight Saving Time is
selected for your Home Time Zone.
Your Home Time Zone
Auto Receive Start Times
12 3 4 5
GMT 0 Standard Time 1:00 am 2:00 am 3:00 am 4:00 am 5:00 am
Daylight Saving Time 2:00 am 3:00 am 4:00 am 5:00 am Midnight
GMT +1 Standard Time 2:00 am 3:00 am 4:00 am 5:00 am
Daylight Saving Time 3:00 am 4:00 am 5:00 am Midnight
GMT +2 Standard Time 3:00 am 4:00 am 5:00 am Midnight 1:00 am
next day
Daylight Saving Time 4:00 am 5:00 am Midnight 1:00 am 2:00 am
next day next day
GMT +9 Standard Time Midnight 1:00 am 2:00 am 3:00 am 4:00 am
E(GMT –5) Standard Time and Midnight 1:00 am 2:00 am 3:00 am 4:00 am
C(GMT –6) Daylight Saving Time
M(GMT–7)
P(GMT–8)
Midnight
1:00 am
next day
Note
When a calibration time is reached, the watch will automatically receive the
calibration signal only if it is in either the Timekeeping Mode or Receive Result
Mode. It is not performed if a calibration time is reached while you are configuring
settings.
Auto receipt of the calibration signal is designed to be performed early in the
morning, while you sleep (provided that the Timekeeping Mode time is set correctly).
Before going to bed for the night, remove the watch from your wrist, and put it in a
location where it can receive the signal easily.
The watch receives the calibration signal for two to ten minutes everyday when the
time in the Timekeeping Mode reaches each of the calibration times. Do not perform
any button operation within ten minutes before or after any one of the calibration
times. Doing so can interfere with correct calibration.
Remember that reception of the calibration signal depends on the current time in the
Timekeeping Mode. The receive operation will be performed whenever the display
shows any one of the calibration times, regardless of whether or not the displayed
time is actually the correct time.
Weak
Strong
(Level 0)
(Level 3)
Receiving indicator
About the Receiving Indicator
The receiving indicator shows the strength of the calibration signal being received. For
best reception, be sure to keep the watch in a location where signal strength is
strongest.
The receiving indicator is displayed while an auto or manual receive operation is in
progress.
Use the receiving indicator as a guide for checking signal strength and for finding the
best location for the watch during signal reception.
To perform manual receive
1.Place the watch on a stable surface so its 6 o’clock side
is facing towards a window.
2.Hold down A for about two seconds until
R0 starts to
flash on the display.
The second hand will move to 12 o’clock and stay there
while actual reception is in progress.
The hour and minute hands continue to keep time
normally.
Time calibration signal reception takes from two to ten
minutes. Take care that you do not perform any button
operations or move the watch during this time.
When receive is successful, the display shows the time
that receive was successful.
The watch will enter the Timekeeping Mode if you press
A or if you do not perform any button operation for
about three minutes.
Receiving
Receive successful
When receive is unsuccessful, the display shows “
xx”.
The watch will enter the Timekeeping Mode without
changing the time setting if you press A or if you do not
perform any button operation for about three minutes.
Receive failed
Note
To interrupt a receive operation and return to the Timekeeping Mode, press A.
Viewing the Latest Signal Reception Results
You can use the Receive Result Mode to check if signal reception was performed
correctly.
To check the latest signal reception results
Enter the Receive Result Mode.
When receive is successful, the display shows the time
that receive was successful. When receive is not
successful, the display shows
xx”.
To return to the Timekeeping Mode, press A.
If you adjust the time or date setting manually, The
display shows “
xx”.
Signal Reception Troubleshooting
Check the following points whenever you experience problems with signal reception.
The watch is not in the Timekeeping
Mode or Receive Result Mode.
Yo ur current Home Time Zone
setting is not one of the following: 0,
+1, +2, +9, E (GMT–5), C (GMT–6),
M (GMT–7) or P (GMT–8)
Yo u changed the time setting
manually.
You were adjusting the watch settings
when the auto receive start times
were reached.
You pressed
A
while signal receive
was in progress.
Cannot
perform
manual
receive.
Auto receive
is not being
performed
successfully
(“
xx
displayed).
Enter the Timekeeping Mode
and try again.
Select 0, +1, +2, +9, E (GMT
–5), C (GMT–6), M (GMT–7)
or P (GMT–8) as your Home
Time Zone.
Perform manual signal
receive or wait until the next
auto signal receive operation
is performed.
Check to make sure the
watch is in a location where it
can receive the signal.
What you should doProblem Probable Cause
For further information, see “Important!” under “Time Calibration Signal Reception”
and “Radio-controlled Timekeeping Precautions”.
Time setting
is incorrect
following
signal
reception.
The Home Time Zone setting is not
correct for the area where you are
using the watch.
The home position of the hands is
off.
Select the correct Home
Time Zone.
Enter the Home Position
Adjustment Mode and adjust
the home position.

Adjusting the Home Positions

If the time and date settings are wrong even after the time calibration signal is
received normally, use the following procedure to adjust their home positions.
To adjust the home positions
1.While in the Timekeeping Mode, hold down A and B
for about five seconds.
The analog hands do not keep time during home
position adjustment.
2.Check the position of the second hand.
The second hand home position is correct if it is
pointing at 12 o’clock.
If the second hand is not pointing at 12 o’clock, it
means that its home position is off. If this happens,
press A to move the second hand clockwise in one-
second steps, until it points at 12 o’clock.
Holding down A for more than two seconds causes
the hands to move at high speed. Pressing A again
stops the hands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 o’clock
Correct second hand
home position
3.Press B to advance to hour and minute hand home
position adjustment.
If current hour and minute hand alignment is correct,
they will both move to 12 o’clock.
4.Check the position of the hour and minute hands.
If the hour and minute hands are not pointing at 12
o’clock, it means that their home position is off. If this
happens, press A to move the hour and minute
hands clockwise in 20-second steps, until they point
at 12 o’clock.
Holding down A for more than two seconds causes
the hands to move at high speed. Pressing A again
stops the hands.
5.Pressing B exits the home position adjustment mode
and enters the Timekeeping Mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Correct hour
and minute hand
home position
12 o’clock

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date. This section also explains how to set the
current date and time manually.
If you become confused and lose your way during the
following procedures, simply put the watch down and do
not perform any button operation for about three
minutes. This will cause the watch to enter the
Timekeeping Mode (indicated by normal one-second
movement of the second hand) automatically. After that,
you can try performing the manual setting procedure
again from the beginning.
All of the operations in this section are performed in the
Timekeeping Mode.
Hour hand
Minute hand
Date
Second hand
Timekeeping
Mode
Hold down B.Press B.
Day of the
Week Language
Auto Receive
MonthDay
Hour
Seconds
GMT Differential
Value
Minutes
DST
Year
To set the time and date manually
1.In the Timekeeping Mode, hold down B for about five
seconds.
This will cause the second hand to move to 12 o’clock.
The hour and minute hands do not move in the setting mode.
2.Press B to cycle through settings in the sequence shown
below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 o’clock

Manual

View the manual for the Casio 4305 here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio 4305 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
B
Brian WellsMarch 16, 2024

Where is factory reset

Casio 4305 specifications

Below you will find the product specifications and the manual specifications of the Casio 4305.

The Casio 4305 is a wristwatch manufactured by Casio, a well-known brand in the watch industry. This timepiece combines functionality and style to meet the needs of its users. The watch is created with a durable build, ensuring its longevity and resistance to wear and tear. Featuring a digital display, the Casio 4305 provides accurate timekeeping. The display is clear and easy to read, making it convenient for users of all ages. The watch also offers additional features such as an alarm, stopwatch, and calendar, adding practicality to its design. With a water resistance of up to a certain depth, the Casio 4305 can withstand splashes and brief immersions in water. This feature protects the watch from water damage in everyday situations but may not be suitable for swimming or diving activities. The watch is powered by a reliable quartz movement, ensuring accurate timekeeping. Quartz movements are known for their precision and low maintenance requirements, making them a popular choice in many watches. The Casio 4305 is designed with a lightweight and comfortable strap, allowing for extended wear without discomfort. The strap is adjustable to fit various wrist sizes, providing a customized fit for every wearer. Overall, the Casio 4305 is a functional and reliable wristwatch that offers accurate timekeeping and additional features. Its durable construction and comfortable design make it suitable for everyday use.

General
BrandCasio
Model4305
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 4305 below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

How do I set the time on the Casio 4305 watch?

To set the time on the Casio 4305 watch, follow these steps: 1. In the Timekeeping Mode, hold down the B button for about five seconds. This will cause the second hand to move to 12 o'clock. 2. Press the B button to cycle through the settings. The sequence of settings is as follows: Auto Receive, Month, Day, Hour, Minutes, GMT Differential Value, DST (Daylight Saving Time), and Year. 3. Use the A button to change the desired setting. For example, to change the hour, press the A button when the Hour setting is displayed, and then use the A button to adjust the hour. 4. After adjusting each setting, press the B button to move to the next setting. 5. Once you have set the desired time and date, press the B button nine times to exit the setting screen. Note: If you become confused during the setting process, you can put the watch down and wait for about three minutes. The watch will automatically enter the Timekeeping Mode, indicated by the normal movement of the second hand. You can then start the manual setting procedure again if needed. Please note that these instructions are specific to the Casio 4305 watch and may differ for other models.

Why is the watch not receiving the time calibration signal?

The Casio 4305 watch may not be receiving the time calibration signal due to various factors. Here are some possible reasons: 1. Weather and Atmospheric Conditions: Signal reception can be affected by weather conditions, atmospheric changes, and seasonal variations. Changes in the reflectivity of the ionosphere or movement of the ionosphere to higher altitudes may temporarily disrupt signal reception. 2. Signal Range: The reception range of the time calibration signal can vary, and there may be areas where proper reception is impossible. The watch is designed to keep time within ±20 seconds a month in such cases. 3. Home Time Zone Setting: Ensure that the Home Time Zone (GMT differential) setting is correct. Incorrect settings may affect signal reception and time accuracy. 4. Transmitter Availability: The watch receives the time calibration signal from specific transmitters based on the selected home time zone. Check if the transmitter corresponding to your time zone is available and operational. 5. Interference: Radio interference from sources such as high-tension power lines, household appliances, or mobile phones can disrupt signal reception. If you are experiencing issues with time calibration signal reception or incorrect time settings, check the above factors and make necessary adjustments.

How do I switch between Standard Time and Daylight Saving Time on the watch?

To switch between Standard Time and Daylight Saving Time on the Casio 4305 watch, follow these steps: 1. In the Timekeeping Mode, hold down the B button until the currently selected Time Zone appears on the display. This enters the setting mode. 2. Press the B button, and the DST (Daylight Saving Time) setting screen will appear. 3. Use the A button to cycle through the DST settings. The available options are Auto DST (At), DST off (OF), and DST on (On). 4. When the desired DST setting is selected, press the B button nine times to exit the setting screen. Please note that the Auto DST setting automatically switches between Standard Time and Daylight Saving Time based on the time calibration signals received. If you experience difficulties receiving the time calibration signal in your area, it is recommended to switch between Standard Time and Daylight Saving Time manually. These steps should help you switch between Standard Time and Daylight Saving Time on your Casio 4305 watch.

Why is the watch not returning to the Timekeeping Mode automatically?

If the Casio 4305 watch is not returning to the Timekeeping Mode automatically, there could be a few possible reasons. Here are some steps to troubleshoot the issue: 1. Check for Inactivity: The watch is designed to automatically return to the Timekeeping Mode if no operation is performed for a certain period of time. Ensure that you have not performed any button operations during this time. 2. Verify Auto Return Setting: Confirm that the Auto Return feature is enabled. This feature automatically returns the watch to the Timekeeping Mode after a period of inactivity. To check the setting, go to the Timekeeping Mode and access the settings menu. Look for the Auto Return option and ensure it is turned on. 3. Check Battery Level: Low battery power can affect the watch's functionality. If the battery level is low, the watch may not be able to return to the Timekeeping Mode automatically. Consider replacing the battery if necessary. 4. Reset the Watch: If the above steps do not resolve the issue, try resetting the watch to its factory settings. This can be done by following the instructions in the manual for a factory reset. By following these steps, you can troubleshoot why the Casio 4305 watch is not returning to the Timekeeping Mode automatically.

How do I change the mode on the Casio 4305 watch?

To change the mode on the Casio 4305 watch, follow these steps: 1. Press the B button to enter the Timekeeping Mode. 2. Hold down the B button for about five seconds. This will cause the second hand to move to 12 o'clock, indicating that you are in the setting mode. 3. Press the B button to cycle through the different settings. The sequence of settings is as follows: Auto Receive, Month, Day, Hour, Minutes, GMT Differential Value, DST (Daylight Saving Time), and Year. 4. Use the A button to change the desired setting. For example, to change the hour, press the A button when the Hour setting is displayed, and then use the A button to adjust the hour. 5. After adjusting each setting, press the B button to move to the next setting. 6. Once you have finished making the desired changes, press the B button nine times to exit the setting mode. By following these steps, you can easily change the mode on your Casio 4305 watch.

Is the manual of the Casio 4305 available in English?

Yes, the manual of the Casio 4305 is available in English .

Is your question not listed? Ask your question here

No results