Casio 3452 manual

Casio 3452
6.9 · 1
PDF manual
 · 41 pages
English
manualCasio 3452

Display Illumination

You can illuminate the display by pressing a
button. The watch also has an auto light
function that automatically illuminates the
display whenever the watch is angled towards
your face for reading.
Note
Illumination will turn off automatically if
an alarm starts to sound.
Illumination is disabled during a GPS
signal receive operation for time
adjustment. Display illumination is also
disabled while measurement by a
sensor is in progress.

Illuminating the Display

Manually

Pressing (B) in any mode turns on illumination.

Auto Light

If Auto Light is enabled, face illumination will
turn on automatically whenever the watch is
positioned at an angle of 40 degrees or more.
40
degrees
or more
Important!
Auto Light may not operate properly
when the watch is at a horizontal angle
of 15 degrees or greater from
horizontal as shown in the illustration
below.
Electro-static charge or magnetism
can interfere with proper auto light
operation. If this happens, try lowering
your arm and then angle it towards
your face again.
When moving the watch you may note
a slight rattling sound. This is due to
operation of the auto light switch,
which determines the current
orientation of the watch. It does not
indicate malfunction.
Note
Auto Light is disabled when any one of
the conditions below exists.
Alarm, timer alert, or other beeper
sounding
While a GPS signal is being received
for time adjustment
If Auto Light is enabled, face
illumination may be delayed if you
angle the watch towards your face
while a compass, altitude, barometric
pressure, or temperature reading
operation is being performed.

Configuring the Auto Light

Setting

1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
Rotary Switch
2.
Press (A).
This displays the Timekeeping Mode
setting screen.
3.
Rotate the rotary switch to move the
pointer to [LIGHT].
4.
Press the rotary switch.
5.
Rotate the rotary switch to move the
pointer to [AUTO LIGHT].
6.
Press the rotary switch.
7.
Rotate the rotary switch to move the
pointer to [ON] (enabled) or [OFF]
(disabled).
[LT] is displayed on the Timekeeping
Mode BASIC screen while Auto Light is
enabled.
8.
Press the rotary switch to exit the setting
screen.
This returns to the Timekeeping Mode
setting screen.
9.
Press (C) as many times as necessary to
exit the setting screen.

Specifying the Illumination

Duration

You can select either 1.5 seconds or three
seconds as the illumination duration.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
Rotary Switch
2.
Press (A).
This displays the Timekeeping Mode
setting screen.
3.
Rotate the rotary switch to move the
pointer to [LIGHT].
4.
Press the rotary switch.
5.
Rotate the rotary switch to move the
pointer to [DURATION].
6.
Press the rotary switch.
7.
Rotate the rotary switch to display the light
duration you want to use.
[1.5 SEC.]: 1.5-second illumination
[3.0 SEC.]: 3-second illumination
8.
Press the rotary switch to exit the setting
screen.
This returns to the Timekeeping Mode
setting screen.
9.
Press (C) as many times as necessary to
exit the setting screen.

Operation Guide 3452

31

View the manual for the Casio 3452 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Casio 3452 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
Model3452
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3452 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio 3452 available in English?

Yes, the manual of the Casio 3452 is available in English .

Is your question not listed? Ask your question here

No results