Casio 3452 manual

Casio 3452
6.9 · 1
PDF manual
 · 41 pages
English
manualCasio 3452

Barometric Pressure Change

Indicator

Each time (A) is held down for about one
second, the barometric pressure change
indicator will toggle between enabled and
disabled. While the barometric pressure
change indicator is enabled, the watch will
beep to alert you whenever it detects a
significant change in air pressure readings
(due to sudden altitude change, or to the
passage of a high or low pressure area).
While the barometric pressure change
indicator is enabled, the [BARO] indicator is
displayed along with one of the indicators
below.
This
indicator:
Means this:
Sudden drop in pressure
Sudden rise in pressure
Sustained rise in pressure,
shifting to a fall
Sustained fall in pressure, shifting
to a rise
Important!
To ensure correct barometric pressure
change indicator operation, enable it in
a location where the altitude is
constant (such as a lodge, camp area,
or on the ocean).
A change in altitude causes a change
in air pressure. Because of this, correct
readings are impossible. Do not take
readings while ascending or
descending a mountain, etc.
Note
You can also enable the barometric
pressure change indicator by
performing the steps below.
A
Press (A).
B
Rotate the rotary switch to move the
pointer to [BARO INFORMATION].
C
Press the rotary switch.
D
Rotate the rotary switch to select the
barometric pressure change indicator
setting you want.
[ENABLE]: Barometric pressure
change indicator enabled
[DISABLE]: Barometric pressure
change indicator disabled
E
Press the rotary switch.
If the barometric change indicator is
enabled, readings are taken every two
minutes even while the watch is not in
the Barometer/Temperature Mode.
The barometric pressure change
indicator becomes disabled
automatically 24 hours after it is
enabled.
Time adjustment using GPS signal
reception or phone connection is
disabled while the barometric pressure
change indicator is enabled. Power
saving is also disabled.
l
Power Saving Function
The barometric pressure change
indicator will become disabled
automatically when the battery
becomes
or lower.

Calibrating Barometric

Pressure Readings

The watch’s pressure sensor is adjusted at the
factory and normally does not require
calibration. However, you can calibrate the
displayed value if you notice major errors in
readings.
Important!
The watch will not be able to produce
correct barometric pressure readings if
you make a mistake during the
calibration procedure. Check to make
sure that the value you use for
calibration produces correct pressure
readings.
1.
Press (A).
This displays the Barometer/
Temperature Mode setting screen.
Rotary Switch
2.
Rotate the rotary switch to move the
pointer to [CALIBRATION].
3.
Press the rotary switch.
4.
Rotate the rotary switch to move the
pointer to [BAROMETER].
5.
Press the rotary switch.
6.
Rotate the rotary switch to move the
pointer to [MANUAL].
Selecting [OFFSET OFF] returns
barometric pressure calibration to its
factory default state.
7.
Press the rotary switch.

Operation Guide 3452

24

View the manual for the Casio 3452 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Casio 3452 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
Model3452
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3452 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio 3452 available in English?

Yes, the manual of the Casio 3452 is available in English .

Is your question not listed? Ask your question here

No results