Casio 3452 manual

Casio 3452
6.9 · 1
PDF manual
 · 41 pages
English
manualCasio 3452
A
Differential between reference altitude
and current altitude
B
Current location altitude
C
Altitude graph
Current reading
200 m

Setting a Reference Altitude

and Taking Relative Altitude

Readings

You can use the procedure below to display
the differential between a reference altitude
and another altitude. This makes it easy to
measure the altitude differential between two
points while climbing or trekking.
1.
Use the contour lines on your map to
determine the altitude differential between
your current location and your destination.
2.
Take an altitude reading of your current
location.
l
Checking the Current Altitude
3.
Hold down (A) for about one second to set
your current location’s altitude as the
reference altitude.
This makes the altitude differential ±0 m
(±0 feet).
4.
While comparing the difference between
the altitude you found on the map and the
altitude differential displayed by the
watch, advance towards your destination.
Current location altitude
Altitude differential indicator
When the altitude differential you found
on the map is the same as that
displayed by the watch, it means you
are close to your destination.
Note
In place of step 3 of the above
procedure, you could perform the
steps below to make the altitude
differential ±0 m (±0 feet).
A
Press (A).
Rotary Switch
B
Rotate the rotary switch to move the
pointer to [DIFF RESET].
C
Press the rotary switch.
This makes the altitude differential ±0
m (±0 feet).
[-----] will appear on the display when a
reading is outside the allowable
altitude measurement range (±3,000
m (±9,840 feet)), or if a measurement
error occurs.

Calibrating Altitude

Readings

To minimize the difference between locally
indicated and measured values, you should
update the reference altitude value before
setting off on and during treks or any other
activities where you take altitude readings.
You can find out the altitude at your current
location from signs, maps, on the Internet, etc.
While mountain climbing, it is highly
recommended that you check a map, local
altitude indications, or some other source for
your current location’s altitude and regularly
calibrate watch readings with the latest
information.
Differences between actual altitude and
watch readings can be caused by the
factors below.
Changes in barometric pressure
Changes in temperature caused by
variations in barometric pressure and by
elevation
Though altitude readings can be taken
without calibration, doing so may produce
readings that are very different from
indications by altitude markers, etc.
1.
Press (A).
This displays the Altimeter Mode setting
screen.
Rotary Switch
2.
Rotate the rotary switch to move the
pointer to [CALIBRATION].
3.
Press the rotary switch.
4.
Rotate the rotary switch to move the
pointer to [MANUAL].
To return the altitude setting to its initial
factory default value, select [OFFSET
OFF].
5.
Press the rotary switch.
6.
Repeat the steps below to input the
altitude in your current location.
Rotate the rotary switch to change the
value or the sign where the underlining
is located. To specify a negative value,
display the minus (-) sign.
Press (D) to move the underlining to
another value.
Rotary Switch
To cancel the setting operation, perform
the steps below.
A
Press (C).
B
Rotate the rotary switch to select
whether or not you want to save the
current settings.
[YES]: Current settings saved
[NO]: Current settings not saved
C
Press the rotary switch.
7.
Press the rotary switch to exit the setting
screen.
This completes the calibration
operation and returns to the Altimeter
Mode setting screen.
8.
Press (C) to exit the setting screen.

Operation Guide 3452

21

View the manual for the Casio 3452 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Casio 3452 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
Model3452
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3452 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio 3452 available in English?

Yes, the manual of the Casio 3452 is available in English .

Is your question not listed? Ask your question here

No results