Casio 3452 manual

Casio 3452
6.9 · 1
PDF manual
 · 41 pages
English
manualCasio 3452
To delete a log
1.
Press (A).
Rotary Switch
2.
Rotate the rotary switch to select a delete
method.
[ONE]: Delete only the currently selected
log.
[ALL]: Delete all logs.
3.
Press the rotary switch.
This deletes the log(s).
If you selected [ALL], press the rotary
switch again to delete. Delete will also
be executed automatically after about
10 seconds, even if you do not press the
rotary switch again.
4.
Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
Note
Acquired log data can be transferred to
a phone for more detailed viewing of
routes traveled, etc.

Setting the GPS Signal

Receive Interval

Use the procedure below to specify the
interval for GPS signal reception and position
information acquisition during navigation.
1.
If a navigation operation is in progress,
stop it.
l
Stopping Navigation
2.
Press the rotary switch.
Rotary Switch
3.
Rotate the rotary switch to move the
pointer to [SETTING].
4.
Press the rotary switch.
5.
Rotate the rotary switch to move the
pointer to [INTERVAL].
6.
Press the rotary switch.
7.
Rotate the rotary switch to display the
GPS receive interval you want to use.
[NORMAL]: Acquires location information
every minute.
[HIGH RATE]: Acquires location
information every few seconds.
8.
Press the rotary switch.
9.
Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
Note
The amount of time that navigation can
be used depends on the receive
interval setting. When you want to
perform long-term continual
navigation, select the [NORMAL]
setting.
[NORMAL]: 24 hours, continuous
[HIGH RATE]: 4 to 5 hours, continuous

Specifying the Distance Unit

1.
If a navigation operation is in progress,
stop it.
l
Stopping Navigation
2.
Press the rotary switch.
This displays the GPS Navigation Mode
setting screen.
Rotary Switch
3.
Rotate the rotary switch to move the
pointer to [SETTING].
4.
Press the rotary switch.
5.
Rotate the rotary switch to move the
pointer to [UNIT].
6.
Press the rotary switch.
7.
Rotate the rotary switch to select the
distance unit.
[KILOMETER]: Kilometers
[MILE]: Miles
8.
Press the rotary switch.
9.
Press (C) to return to the GPS Navigation
Mode setting screen.

Digital Compass

You can use the Digital Compass Mode to
determine the direction of north, and to check
your bearing to a destination.
Important!
Check the information below to find out
how to ensure correct readings.
l
Calibrating Compass Readings
l
Digital Compass Reading
Precautions
Getting ready
Enter the Compass Mode.
l
Navigating Between Modes
Entering the Compass Mode starts
compass readings.

Taking a Compass Reading

Point 12 o’clock in the direction of your desired
objective, and will indicate north. The
bearing and bearing angle to your objective
will also appear on the display.
Even if the watch is not level when you take
a reading, an auto level correction function
will automatically compensate for the angle
and display a result. Note, however, that if
the watch is positioned so its display is
nearly perpendicular to the ground, the
angle display will go blank and the watch will
not perform bearing measurement.
To retrigger the compass operation, press
(D).
Interpreting Bearing Readings
214°
Bearing to objective
Bearing angle to
objective
North
Bearing
Objective
Directions: N (North), E (East), W (West), S
(South)

Operation Guide 3452

17

View the manual for the Casio 3452 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Casio 3452 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
Model3452
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3452 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio 3452 available in English?

Yes, the manual of the Casio 3452 is available in English .

Is your question not listed? Ask your question here

No results