Casio 3285 manual

Casio 3285
7.6 · 1
PDF manual
 · 5 pages
English
manualCasio 3285

Operation Guide 3285

E-19
To toggle a city code time between Standard Time and Daylight Saving Time
DST indicator
In the World Time Mode, use 1. D and B to display the
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
Hold down 2. A for about one second to toggle Daylight
Saving Time (DST displayed) and Standard Time (DST
not displayed).
The x DST indicator is on the display whenever you display
a city code for which Daylight Saving Time is turned on.
Note that the DST/Standard Time setting affects only x
the currently displayed city code. Other city codes are
not affected.
Note that you cannot switch between Standard Time x
and Daylight Saving Time while UTC is selected as the
city code.
E-18

World Time

City code
Current time and date in
the zone of the selected
city code
World Time shows the current time in 48 cities (31 time
zones) around the world.
All of the operations in this section are performed in x
the World Time Mode, which you enter by pressing C
(page E-6).
To view the time for another city code
While in the World Time Mode, use D (eastward) and B
(westward) to scroll through the city codes (time zones).
For full information about city codes, see the “City Code x
Table” at the back of this manual.
If the current time for a city is wrong, check your x
Timekeeping Mode time and time zone settings and
make the necessary changes.
E-17

Swapping the Home City Time with a Local Time

You can use the procedure below to swap the current Home City Time (T-1) with one
of the Local Times (T-2, T-3, T-4).
In the Timekeeping Mode, use 1. D to display the Local Time that you want to swap
with the Home City Time.
Press 2. A and B at the same time.
E-16

12/24-Hour Format

With the 12-hour format, the x P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x
applied in all other modes.
Changing the City Setting of a Local Time
You can select any one of the city codes in the table at the back of this manual as a
Local Time city.
Display the Local Time whose city setting you want to change, and then hold down 1.
A for about one second until the current city code starts to fl ash.
Use 2. D (east) and B (west) to select the city code you want.
Press 3. C to display the DST setting screen.
Press 4. D to toggle between Daylight Saving Time (
displayed) and Standard
Time (
displayed).
After the settings are the way you want, press 5. A.
E-15
To toggle the Timekeeping Mode time between DST and Standard Time
DST indicator
Use 1. D to display the current Home City Time (T-1)
screen.
Hold down 2. A until the seconds start to fl ash, which
indicates the setting screen.
Press 3. C to display the DST setting screen.
Press 4. D to toggle between Daylight Saving Time
(
displayed) and Standard Time ( displayed).
Press 5. A to exit the setting screen.
The x DST indicator appears on the Timekeeping screen to
indicate that Daylight Saving Time is turned on.
E-14
See “Daylight Saving Time (DST)” on page E-14 for details about DST setting. x
For information about Flash Alert, see “Flash Alert” (page E-41). x
Press 5. A to exit the setting screen.
The day of the week is displayed automatically in accordance with the date (year, x
month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-13
Screen To do this: Do this:
Reset the seconds to .
Press D.
Toggle between Daylight Saving Time ( )
and Standard Time ( ).
Change the city code.
Use D (east) and B (west).
Change the hour or minutes.
Use D (+) and B (–).
Toggle between 12-hour ( ) and 24-hour
(
) timekeeping.
Press D.
Change the year.
Use D (+) and B (–).
Change the month or day.
Toggle the setting between 1.5 seconds
(
) and 3 seconds ( ).
Press D.
Toggle between Flash Alert on ( ) and
off
( ).
E-12
CCC CCC
CCCCC
Seconds DST City Code Hour Minutes
YearMonthDay
Flash Alert
Illumination Duration Setting
12/24-Hour Format
When the setting you want to change is fl ashing, use 4. D and B to change it as
described below.
E-11
Changing the Current Home City Time and Date Settings
Use 1. D to display the current Home City Time (T-1)
screen.
Hold down 2. A until the seconds start to fl ash, which
indicates the setting screen.
Press 3. C to move the fl ashing in the sequence shown
below to select other settings.
E-10
While the Home City Time (T-1) screen is displayed, pressing x A will switch the day
of the week / month-day indication to the currently selected Home City code and the
T-1 indicator for about one second.
You can change the current time setting for your Home City Time (T-1) only. x
For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting. x

Scrolling through the Time Screens

In the Timekeeping Mode (page E-6), holding down x D for about three seconds will
cycle the time screens in sequence, from T-1 through T-4.
Pressing any button will display the Home City Time (T-1) screen. x

Manual

View the manual for the Casio 3285 here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Casio 3285 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
D
DECIO COZZIMarch 14, 2021

I would like to set my watch 1 hour forward!!!!

B
Bruce HutchisonMarch 25, 2023

Turn on the light

J
John Edward priorJuly 29, 2021

how do I set hourly time signal indicator?

Casio 3285 specifications

Below you will find the product specifications and the manual specifications of the Casio 3285.

The Casio 3285 watch is a timepiece produced by the Japanese electronics manufacturer Casio. This watch model features a digital display that shows the time and date. It also includes additional features such as an alarm, stopwatch, and a countdown timer. The watch is powered by a battery, ensuring accurate timekeeping. The Casio 3285 watch is designed with a durable and sturdy build, using high-quality materials to enhance its longevity. The band is made from a strong and resilient material, providing both comfort and durability for daily wear. The watch face is protected by a scratch-resistant glass, keeping the display clear and free from damages. This particular Casio watch is water-resistant, allowing it to withstand splashes and brief immersion. However, it is important to note the specific depth rating for water resistance, as it may vary. The watch features easy-to-use buttons for adjusting the settings and switching between different functions. The Casio 3285 watch offers a range of functions that allow users to customize and tailor their timekeeping experience. The alarm feature enables users to set daily reminders, while the stopwatch allows for precise timing of events. The countdown timer is useful for activities that require specific time limits. Overall, the Casio 3285 watch provides reliable timekeeping and additional functionality in a durable and well-designed package. With its array of features and quality construction, this watch serves as a dependable accessory for individuals in need of a practical and stylish timepiece.

General
BrandCasio
Model3285
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3285 below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

How do I scroll through data on the display of the Casio 3285 watch?

To scroll through data on the display of the Casio 3285 watch, follow these steps: 1. In most cases, use the B and D buttons to scroll through data on the display. 2. Press and hold down the B or D button during a scroll operation to scroll at high speed. 3. When you enter the World Time or Alarm Mode, the data you were viewing when you last exited the mode will appear first on the display. 4. To reset the seconds, if the current count is between 30 and 59, press the B button to increase the minutes by 1. If the current count is between 00 and 29, the seconds will be reset to 00 without changing the minutes. 5. The year can be set in the range of 2000 to 2099. Once you set the date, there should be no reason to change it unless you have the watch's battery replaced. 6. To turn on/off the button operation tone, hold down the C button in any mode (except when a setting screen is displayed). The mute indicator will be displayed when the tone is turned off. 7. If you leave the watch in the Alarm Mode for two or three minutes without any operation, it will automatically change to the Timekeeping Mode. If you leave a screen with flashing digits for two or three minutes without any operation, the watch will automatically exit the setting screen. 8. The Casio 3285 watch has two graphic areas named A and B. In the Timekeeping Mode and World Time Mode, segments in graphic area A indicate the current time. In the Countdown Timer Mode and Stopwatch Mode, segments in graphic area B indicate the ongoing timer measurement. These steps should help you scroll through data on the display of your Casio 3285 watch.

How do I scroll at high speed on the Casio 3285 watch?

To scroll at high speed on the Casio 3285 watch, follow these steps: 1. In most cases, when you want to scroll through data on the display, press and hold down either the B or D button. 2. Holding down the B or D button during a scroll operation will allow you to scroll at high speed. 3. This high-speed scrolling feature is available in various modes and setting screens of the watch. 4. When you enter the World Time or Alarm Mode, the data you were viewing when you last exited the mode will appear first on the display. 5. To exit the high-speed scrolling mode, release the B or D button. By following these steps, you will be able to scroll through data at high speed on your Casio 3285 watch.

How do I reset the seconds on the Casio 3285 watch?

To reset the seconds on the Casio 3285 watch, follow these steps: 1. While in the Timekeeping Mode, press the D button to display the current time screen. 2. Hold down the D button for about three seconds until the seconds start to flash, indicating the setting screen. 3. Press the C button to move the flashing to the seconds setting. 4. Use the D button to increase the seconds or the B button to decrease the seconds until you reach the desired value. 5. Once the seconds are set, press the D button to confirm and move to the next setting. 6. Continue setting the other parameters, such as the hour, minutes, year, month, and day, using the same method. 7. After setting all the desired parameters, press the D button to exit the setting screen. By following these steps, you will be able to reset the seconds on your Casio 3285 watch.

How do I set the year on the Casio 3285 watch?

To set the year on the Casio 3285 watch, follow these steps: 1. In the Timekeeping Mode, press the D button to display the current time screen. 2. Hold down the A button until the seconds start to flash, indicating the setting screen. 3. Press the C button to move the flashing to the year setting. 4. Use the D button to increase the year or the B button to decrease the year until you reach the desired value. 5. Once the year is set, press the A button to confirm and move to the next setting. 6. Continue setting the other parameters, such as the month and day, using the same method. 7. After setting all the desired parameters, press the A button to exit the setting screen. By following these steps, you will be able to set the year on your Casio 3285 watch.

How do I use the built-in full automatic calendar on the Casio 3285 watch?

To use the built-in full automatic calendar on the Casio 3285 watch, follow these steps: 1. In the Timekeeping Mode, press the D button to display the current time screen. 2. Hold down the A button until the seconds start to flash, indicating the setting screen. 3. Press the C button to move the flashing to the year setting. 4. Use the D button to increase the year or the B button to decrease the year until you reach the desired value. 5. Once the year is set, press the A button to confirm and move to the next setting. 6. Continue setting the other parameters, such as the month and day, using the same method. 7. The watch's built-in full automatic calendar takes into account different month lengths and leap years, so there should be no need to change the date unless the watch's battery is replaced. By following these steps, you will be able to use the built-in full automatic calendar on your Casio 3285 watch.

How do I turn on/off the button operation tone on the Casio 3285 watch?

To turn on/off the button operation tone on the Casio 3285 watch, follow these steps: 1. In any mode (except when a setting screen is displayed), hold down the C button. 2. While holding down the C button, the button operation tone will toggle between on and off. 3. When the button operation tone is turned on, you will not see any mute indicator displayed. 4. When the button operation tone is turned off, a mute indicator will be displayed on the watch. 5. Holding down the C button to turn the button operation tone on or off will also cause the watch's current mode to change. 6. Please note that even if you turn off the button operation tone, the alarms, the Hourly Time Signal, and the countdown alarm will still operate normally. By following these steps, you will be able to turn on/off the button operation tone on your Casio 3285 watch.

How do I know if the button operation tone is turned off on the Casio 3285 watch?

To know if the button operation tone is turned off on the Casio 3285 watch, follow these steps: 1. Look at the watch's display. 2. If you see a mute indicator displayed on the watch, it means that the button operation tone is turned off. 3. The mute indicator is a visual indication that the button operation tone is disabled. 4. When the button operation tone is turned off, you will not hear any sound when pressing the buttons on the watch. 5. If you do not see the mute indicator on the display, it means that the button operation tone is turned on. 6. When the button operation tone is turned on, you will hear a sound when pressing the buttons on the watch. By following these steps and observing the presence or absence of the mute indicator on the display, you can determine if the button operation tone is turned off or on on your Casio 3285 watch.

How does the Casio 3285 watch automatically return to the Timekeeping Mode?

To understand how the Casio 3285 watch automatically returns to the Timekeeping Mode, follow these steps: 1. The watch has an auto return feature that automatically switches the display back to the Timekeeping Mode under certain conditions. 2. If you leave the watch in the Alarm Mode for two or three minutes without performing any operation, it will automatically change back to the Timekeeping Mode. 3. Similarly, if you leave a screen with flashing digits on the display for two or three minutes without performing any operation, the watch will automatically exit the setting screen and return to the Timekeeping Mode. 4. This auto return feature ensures that the watch returns to its default mode when there is no user input for a certain period of time. 5. It allows you to easily switch between different modes and settings without having to manually navigate back to the Timekeeping Mode. By understanding this auto return feature, you can rely on the Casio 3285 watch to automatically return to the Timekeeping Mode when necessary.

How does the Casio 3285 watch automatically exit the setting screen?

To understand how the Casio 3285 watch automatically exits the setting screen, follow these steps: 1. When you are in a setting screen on the watch, such as when adjusting the time or date, the watch will automatically exit the setting screen under certain conditions. 2. If you leave the setting screen without performing any operation for two or three minutes, the watch will automatically exit the setting screen and return to the previous mode. 3. This feature ensures that the watch does not remain in the setting screen indefinitely and allows you to easily navigate back to the main mode. 4. It is important to note that the specific duration of inactivity before the watch automatically exits the setting screen may vary. 5. Once the watch exits the setting screen, you can continue using it in the normal mode or navigate to other functions and modes as needed. By understanding this automatic exit feature, you can ensure that the Casio 3285 watch seamlessly transitions from the setting screen back to the main mode when there is no user input for a certain period of time.

What are the graphic areas A and B on the Casio 3285 watch?

The Casio 3285 watch has two graphic areas named A and B. Here is a concise explanation of each graphic area: 1. Graphic area A: In the Timekeeping Mode and World Time Mode, segments in graphic area A indicate the current time in units of 10 seconds. In the Countdown Timer Mode and Stopwatch Mode, segments in graphic area A indicate the ongoing timer measurement in units of 1/10 second. 2. Graphic area B: In the Timekeeping Mode and World Time Mode, segments in graphic area B indicate the current time in units of one second. In the Countdown Timer Mode and Stopwatch Mode, segments in graphic area B indicate the ongoing timer measurement in units of one second. These graphic areas provide visual representations of the time and timer measurements on the display of the Casio 3285 watch. By understanding the purpose of each graphic area, you can easily interpret the information displayed on your watch.

How does the Casio 3285 watch indicate the current time in different modes?

The Casio 3285 watch indicates the current time in different modes through its display. Here is a concise explanation of how the watch indicates the current time in each mode: 1. Timekeeping Mode: The watch displays the current time in hours, minutes, and seconds. The hours and minutes are shown in the main area of the display, while the seconds are indicated in graphic area A. 2. World Time Mode: In this mode, the watch displays the current time for different cities or time zones. The hours and minutes for the selected city are shown in the main area of the display, while the seconds are indicated in graphic area A. 3. Countdown Timer Mode: When using the countdown timer, the watch displays the remaining time in hours, minutes, and seconds. The hours and minutes are shown in the main area of the display, while the seconds are indicated in graphic area B. 4. Stopwatch Mode: In this mode, the watch displays the elapsed time in hours, minutes, and seconds. The hours and minutes are shown in the main area of the display, while the seconds are indicated in graphic area B. By understanding how the watch displays the current time in each mode, you can easily read and interpret the time information on your Casio 3285 watch.

How does the Casio 3285 watch indicate the ongoing timer measurement in different modes?

The Casio 3285 watch indicates the ongoing timer measurement in different modes as follows: 1. Countdown Timer Mode: The watch displays the remaining time in hours, minutes, seconds, and 1/10 second. The hours and minutes are shown in the main area of the display, while the seconds and 1/10 second are indicated in graphic area B. 2. Stopwatch Mode: In this mode, the watch displays the elapsed time in hours, minutes, seconds, and 1/100 second. The hours and minutes are shown in the main area of the display, while the seconds and 1/100 second are indicated in graphic area A. 3. Other Modes: In modes such as Timekeeping Mode and World Time Mode, the watch does not actively display ongoing timer measurements. Instead, it focuses on displaying the current time and other relevant information. By understanding how the Casio 3285 watch indicates the ongoing timer measurement in different modes, you can easily track and monitor the progress of your timers and stopwatch functions.

Is the manual of the Casio 3285 available in English?

Yes, the manual of the Casio 3285 is available in English .

Is your question not listed? Ask your question here

No results