Casio 3031 manual

Casio 3031
9.2 · 1
PDF manual
 · 4 pages
English
manualCasio 3031
4

Operation Guide 3031

Illumination Precautions
The electro-luminescent panel that provides illumination loses power after very long
use.
Illumination may be hard to see when viewed under direct sunlight.
The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
Illumination turns off automatically whenever an alarm sounds.
Frequent use of illumination runs down the battery.
Auto light switch precautions
Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light
switch to operate when it is not needed, which shortens battery life. If you want to
wear the watch on the inside of your wrist, turn off the auto light switch feature.
Illumination may not turn on if the face of the watch is
more than 15 degrees above or below parallel. Make
sure that the back of your hand is parallel to the ground.
Illumination turns off after the preset illumination
duration (see To specify the illumination duration),
even if you keep the watch pointed towards your face.
Static electricity or magnetic force can interfere with
proper operation of the auto light switch. If illumination
does not turn on, try moving the watch back to the
starting position (parallel with the ground) and then tilt it
back towards you again. If this does not work, drop your
arm all the way down so it hangs at your side, and then
bring it back up again.
Under certain conditions, illumination may not turn on until about one second after
you turn the face of the watch towards you. This does not necessarily indicate
malfunction of the auto light switch.
You may notice a very faint clicking sound coming from the watch when it is shaken
back and forth. This sound is caused by mechanical operation of the auto light
switch, and does not indicate a problem with the watch.
City
City
UTC
Other major cities in same time zone
Code Differential
Pago Pago
Honolulu
Anchorage
Los Angeles
Denver
Mexico City
Chicago
New York
Caracas
St. Johns
Rio De Janeiro
Buenos Aires
Praia
London
Dakar
Madrid
Paris
Monte Carlo
Rome
Berlin
Stockholm
Athens
Johannesburg
Ankara
Nicosia
Helsinki
Cairo
Jerusalem
Moscow
Jeddah
Tehran
Dubai
Kabul
Karachi
Delhi
Dhaka
Yangon
Bangkok
Singapore
Hong Kong
Beijing
Perth
Seoul
Tokyo
Adelaide
Sydney
Noumea
Wellington
11.0
10.0
09.0
08.0
07.0
06.0
05.0
04.0
03.5
03.0
01.0
+00.0
+01.0
+02.0
+03.0
+03.5
+04.0
+04.5
+05.0
+05.5
+06.0
+06.5
+07.0
+08.0
+09.0
+09.5
+10.0
+11.0
+12.0
Papeete
Nome
San Francisco, Las Vegas, Vancouver, Seattle/Tacoma,
Dawson City
El Paso, Edmonton
Winnipeg, Houston, Dallas/Fort Worth, New Orleans
Montreal, Detroit, Miami, Boston, Panama City, Havana, Lima,
Bogota
La Paz, Santiago, Port Of Spain
Sao Paulo, Brasilia, Montevideo
Dublin, Lisbon, Casablanca, Abidjan
Milan, Amsterdam, Algiers, Hamburg, Frankfurt, Vienna
Istanbul, Beirut, Damascus, Cape Town
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi
Shiraz
Abu Dhabi, Muscat
Male
Mumbai, Kolkata
Colombo
Jakarta, Phnom Penh, Hanoi, Vientiane
Kuala Lumpur, Taipei, Manila, Ulaanbaatar
Pyongyang
Darwin
Melbourne, Guam, Rabaul
Port Vila
Christchurch, Nadi, Nauru Island
PPG
HNL
ANC
LAX
DEN
MEX
CHI
NYC
CCS
YYT
RIO
BUE
RAI
LON
DKR
MAD
PAR
MCM
ROM
BER
STO
ATH
JNB
ANK
NIC
HEL
CAI
JRS
MOW
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
SIN
HKG
BJS
PER
SEL
TYO
ADL
SYD
NOU
WLG
*Based on data as of December 2005.

City Code Table

Manual

View the manual for the Casio 3031 here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Casio 3031 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Casio 3031 specifications

Below you will find the product specifications and the manual specifications of the Casio 3031.

The Casio 3031 is a wristwatch that offers a range of features and functions. With its durable and rugged design, it is suitable for various activities and environments. The watch features a digital display that shows the time, date, and day of the week. It also includes an alarm function, allowing users to set reminders and wake up on time. The Casio 3031 is water-resistant, protecting it from damage caused by splashes or brief immersion in water. Additionally, the watch offers a stopwatch function, allowing users to time themselves during various activities. The Casio 3031 also includes a countdown timer, useful for tracking intervals or countdowns. With its clear and easy-to-read display, the watch ensures that information is easily accessible at a glance. The Casio 3031 operates on battery power, providing long-lasting usage before requiring a replacement. It features a lightweight design, making it comfortable to wear for extended periods. The watch also comes with a durable strap that securely fastens to the wrist. In conclusion, the Casio 3031 offers a range of practical features in a durable and reliable package. Its water-resistant design, along with its stopwatch and alarm functions, make it suitable for various outdoor activities and everyday use.

General
BrandCasio
Model3031
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3031 below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

How can I turn off the button operation tone on my Casio 3031 watch?

To turn off the button operation tone on your Casio 3031 watch, follow these steps: 1. Make sure you are not on a setting screen. If you are, exit the setting screen. 2. Press and hold the C button. This will toggle the button operation tone on or off. 3. When the button operation tone is turned off, the MUTE indicator will be displayed in all modes. 4. Release the C button. Please note that even if you turn off the button operation tone, the alarms, hourly time signal, countdown alarm, and stopwatch auto start will still operate normally. By following these steps, you can easily turn off the button operation tone on your Casio 3031 watch.

Why are the alarms, hourly time signal, countdown alarm, and stopwatch auto start affected by the button operation tone on my Casio 3031 watch?

The alarms, hourly time signal, countdown alarm, and stopwatch auto start on your Casio 3031 watch are affected by the button operation tone for the following reasons: 1. The button operation tone is a sound that is produced whenever you press one of the watch's buttons. It serves as an audible feedback for button presses. 2. When you turn off the button operation tone, it also affects the alarms, hourly time signal, countdown alarm, and stopwatch auto start. However, these functions will still operate normally even with the button operation tone turned off. 3. The purpose of this design is to provide a silent operation for the watch, especially in situations where the button operation tone may be disruptive or unwanted, such as during meetings or in quiet environments. By turning off the button operation tone, you can ensure that the alarms, hourly time signal, countdown alarm, and stopwatch auto start functions on your Casio 3031 watch operate silently.

How does the automatic return feature work on my Casio 3031 watch?

The automatic return feature on your Casio 3031 watch works as follows: 1. If you leave the watch in the Alarm Mode for two or three minutes without performing any operation, it automatically changes to the Timekeeping Mode. 2. Similarly, if you leave a screen with flashing digits on the display for two or three minutes without performing any operation, the watch automatically exits the setting screen. The purpose of the automatic return feature is to ensure that the watch returns to the Timekeeping Mode or exits the setting screen when left idle for a certain period of time. This helps conserve battery life and prevents accidental changes to settings. By understanding how the automatic return feature works, you can use your Casio 3031 watch more efficiently and avoid unintended mode changes or settings adjustments.

Why does my Casio 3031 watch automatically change to the Timekeeping Mode when left in the Alarm Mode for a certain period of time?

Your Casio 3031 watch automatically changes to the Timekeeping Mode when left in the Alarm Mode for a certain period of time due to the following reasons: 1. The Alarm Mode is designed for setting and managing alarms on your watch. 2. When you enter the Alarm Mode and perform the desired alarm settings, the watch expects you to complete the necessary operations and exit the mode. 3. However, if you leave the watch in the Alarm Mode without performing any further operations for a specific duration (usually around two or three minutes), the watch assumes that you have finished setting the alarms and automatically switches back to the Timekeeping Mode. This automatic change to the Timekeeping Mode helps ensure that the watch returns to its default mode after a period of inactivity, preventing accidental changes to alarm settings and conserving battery life. By understanding this functionality, you can effectively manage your Casio 3031 watch's modes and ensure that it operates as intended.

How do I scroll through data on the display of my Casio 3031 watch using the B and D buttons?

To scroll through data on the display of your Casio 3031 watch using the B and D buttons, follow these steps: 1. In various modes and setting screens, the B and D buttons are used to scroll through data on the display. 2. Press the B button to scroll through the data in one direction, such as moving from one option to the next or scrolling through a list. 3. Press the D button to scroll through the data in the opposite direction, allowing you to navigate back or move to the previous option. 4. In most cases, holding down the B or D button during a scroll operation will increase the scrolling speed, allowing you to quickly move through the data. By using the B and D buttons, you can easily navigate and scroll through the data displayed on your Casio 3031 watch, whether it's selecting options, viewing lists, or moving between different screens.

How can I scroll at high speed through data on my Casio 3031 watch?

To scroll at high speed through data on your Casio 3031 watch, follow these steps: 1. Use the B and D buttons to navigate through various modes and setting screens. 2. When you need to scroll through data on the display, press and hold either the B or D button. 3. Holding down the B or D button during a scroll operation will increase the scrolling speed, allowing you to quickly move through the data. 4. Continue holding the button until you reach the desired position or data on the display. By holding down the B or D button, you can scroll at high speed through the data on your Casio 3031 watch. This feature enables efficient navigation and saves time when accessing information or adjusting settings.

Why does my Casio 3031 watch display the last viewed data when entering the World Time or Alarm Mode?

Your Casio 3031 watch displays the last viewed data when entering the World Time or Alarm Mode for the following reasons: 1. The watch is designed to remember the last viewed data in these modes to provide convenience and ease of use. 2. When you exit the World Time or Alarm Mode, the watch stores the information you were viewing, such as the time in different cities or the set alarm times. 3. When you re-enter the World Time or Alarm Mode, the watch automatically displays the last viewed data, allowing you to quickly access the information without having to re-enter it. 4. This feature saves time and effort, especially if you frequently need to refer to the same world time or alarm settings. By displaying the last viewed data, your Casio 3031 watch ensures that you can easily access and reference the information you were previously viewing in the World Time or Alarm Mode, enhancing the user experience and convenience.

How do I reset the seconds on my Casio 3031 watch?

To reset the seconds on your Casio 3031 watch, follow these steps: 1. In the Timekeeping Mode, hold down the A button until the seconds start to flash, indicating that you are in the setting screen. 2. Press the D button to reset the seconds to 00. 3. Press the A button to exit the setting screen and save the changes. By following these steps, you can easily reset the seconds on your Casio 3031 watch. This feature allows you to synchronize the time accurately and ensure that the seconds display starts from zero.

How do I set the year on my Casio 3031 watch?

To set the year on your Casio 3031 watch, follow these steps: 1. In the Timekeeping Mode, hold down the A button until the seconds start to flash, indicating that you are in the setting screen. 2. Press the D button repeatedly to navigate to the year setting. 3. Use the B button to decrease the year or the D button to increase the year until you reach the desired value. 4. After setting the year, press the A button to exit the setting screen and save the changes. By following these steps, you can easily set the year on your Casio 3031 watch. This allows you to keep the watch's date and time accurate and up to date.

How does the built-in full automatic calendar on my Casio 3031 watch work?

The built-in full automatic calendar on your Casio 3031 watch works as follows: 1. The watch automatically adjusts the date, including the day, month, and year, based on the current time and date information. 2. The watch uses the information you set, such as the time, to calculate and display the correct date. 3. The full automatic calendar takes into account the number of days in each month, including leap years, to ensure accurate date display. 4. The watch also considers daylight saving time (DST) adjustments, if applicable, to accurately reflect the current date and time. By relying on the built-in full automatic calendar, you can trust that your Casio 3031 watch will always display the correct date without the need for manual adjustments. This feature provides convenience and ensures that you stay on track with the current date and time.

Is the manual of the Casio 3031 available in English?

Yes, the manual of the Casio 3031 is available in English .

Is your question not listed? Ask your question here

No results