Casio 3031 manual

Casio 3031
9.2 · 1
PDF manual
 · 4 pages
English
manualCasio 3031
3

Operation Guide 3031

Button Operation Tone
The button operation tone sounds any time you press one
of the watchs buttons. You can turn the button operation
tone on or off as desired.
Even if you turn off the button operation tone, the
alarms, the Hourly Time Signal, the countdown alarm,
and stopwatch auto start all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down C to toggle the button operation tone
on (MUTE not displayed) and off (MUTE displayed).
Holding down C to turn the button operation tone on or off also causes the watchs
current mode to change.
The MUTE indicator is displayed in all modes when the button operation tone is
turned off.
Auto Return Features
If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it automatically changes to the Timekeeping Mode.
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Timekeeping
Resetting the seconds to
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
The year can be set in the range of 2000 to 2099.
The watchs built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watchs battery replaced.
World Time
All World Time Mode times are calculated from the current Home City time in the
Timekeeping Mode using UTC time differential values.
The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
The letters UTC is the abbreviation for Coordinated Universal Time, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earths
rotation.
Flash Alert
When Flash Alert is turned on, the illumination flashes for
the alarms, the Hourly Time Signal, the countdown alarm,
and stopwatch (ST1) auto start.
To turn Flash Alert on and off
In the Timekeeping Mode, hold down D for about three
seconds to toggle Flash Alert on (Flash Alert indicator
displayed) or off (Flash Alert indicator not displayed).
Illumination flashes twice when you turn Flash Alert on
and once when turn Flash Alert off.
While Flash Alert is turned on, the Flash Alert indicator
remains on the display in all modes.
Note that pressing D to toggle Flash Alert on or off will
also switch timekeeping between 12-hour and 24-hour
format.
About the Auto Light Switch
While the auto light switch is enabled, illumination turns on whenever you position
your wrist as described below in any mode.
Moving the watch to a position that is parallel to the ground and then tilting it
towards you at more than 40 degrees causes illumination to turn on.
Wear the watch on the outside of your wrist.
Warning!
Always make sure you are in a safe place whenever you are reading the watch
using the auto light switch. Be especially careful when running or engaged in
any other activity that can result in accident or injury. Also take care that
sudden illumination by the auto light switch does not startle or distract others
around you.
When you are wearing the watch, make sure that its auto light switch is turned
off before riding on a bicycle or operating a motorcycle or any other motor
vehicle. Sudden and unintended operation of the auto light switch can create
a distraction, which can result in a traffic accident and serious personal injury.
To turn the auto light switch on and off
In the Timekeeping Mode, hold down B for about three seconds to toggle the auto
light switch on (auto light switch indicator displayed) or off (auto light switch indicator
not displayed).
The auto light switch indicator is on the display in all modes while the auto light
switch is turned on.
In order to protect against running down the battery, the auto light switch turns off
automatically approximately six hours after you turn it on.
To illuminate the display
In any mode, press L to turn on illumination.
The above operation turns on illumination regardless of the current auto light switch
setting.
You can use the procedure below to select either 3 seconds or 5 seconds as the
illumination duration. When you press L, the illumination will remain on for about
3 seconds or 5 seconds, depending on the current illumination duration setting.
To specify the illumination duration
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. While the seconds are flashing, press B to toggle the
setting between 3 seconds (
) and 5 seconds ( ).
3. Press A to exit the setting screen.

Illumination

This watch has two EL (electro-luminescent) panels that
cause the entire display to glow for easy reading in the
dark. The watchs auto light switch turns on illumination
automatically when you angle the watch for reading
towards your face.
The auto light switch must be turned on (indicated by
the auto light switch indicator) for it to operate.
See Illumination Precautions for more important
information.

World Time

World Time shows the current time in 48 cities (29 time
zones) around the world.
All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C.
To view the time for another city code
In the World Time Mode, press D to scroll eastwardly
through city codes.
In the World Time Mode, press B to scroll westwardly
through city codes.
For full information about city codes, see the City Code
Table.
If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make necessary changes.
Current time and date in
the zone of the selected
city code
City code
Auto light switch indicator
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D (east) and B (west) to
display the city code (time zone) whose Standard Time/
Daylight Saving Time setting you want to change.
2. Hold down A for about one second to toggle Daylight
Saving Time (DST displayed) and Standard Time (DST
not displayed).
The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
DST indicator
Parallel to ground More than 40
°

Reference

This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Graphic Areas
There are three graphic areas named A, B, and C. The information shown in each
graphic area depends on the current mode.
Graphic area B
Graphic area A
Graphic area C
The following table shows the information that appears in graphic area A.
Flash Alert indicator
In all modes, graphic area B shows the Stopwatch Mode (ST1) minutes (one
segment each for 5 minutes, 10 minutes, etc.).
In all modes, graphic area C shows the Stopwatch Mode (ST2) minutes (one
segment each for 5 minutes, 10 minutes, etc.).
Mode
Timekeeping
World Time
Stopwatch (ST1 and ST2)
Countdown Timer
Alarm
Graphic Area A
Timekeeping Mode seconds
Timekeeping Mode seconds
Sweeps from left to right
Sweeps from right to left
No indication

Manual

View the manual for the Casio 3031 here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Casio 3031 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Casio 3031 specifications

Below you will find the product specifications and the manual specifications of the Casio 3031.

The Casio 3031 is a wristwatch that offers a range of features and functions. With its durable and rugged design, it is suitable for various activities and environments. The watch features a digital display that shows the time, date, and day of the week. It also includes an alarm function, allowing users to set reminders and wake up on time. The Casio 3031 is water-resistant, protecting it from damage caused by splashes or brief immersion in water. Additionally, the watch offers a stopwatch function, allowing users to time themselves during various activities. The Casio 3031 also includes a countdown timer, useful for tracking intervals or countdowns. With its clear and easy-to-read display, the watch ensures that information is easily accessible at a glance. The Casio 3031 operates on battery power, providing long-lasting usage before requiring a replacement. It features a lightweight design, making it comfortable to wear for extended periods. The watch also comes with a durable strap that securely fastens to the wrist. In conclusion, the Casio 3031 offers a range of practical features in a durable and reliable package. Its water-resistant design, along with its stopwatch and alarm functions, make it suitable for various outdoor activities and everyday use.

General
BrandCasio
Model3031
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio 3031 below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

How can I turn off the button operation tone on my Casio 3031 watch?

To turn off the button operation tone on your Casio 3031 watch, follow these steps: 1. Make sure you are not on a setting screen. If you are, exit the setting screen. 2. Press and hold the C button. This will toggle the button operation tone on or off. 3. When the button operation tone is turned off, the MUTE indicator will be displayed in all modes. 4. Release the C button. Please note that even if you turn off the button operation tone, the alarms, hourly time signal, countdown alarm, and stopwatch auto start will still operate normally. By following these steps, you can easily turn off the button operation tone on your Casio 3031 watch.

Why are the alarms, hourly time signal, countdown alarm, and stopwatch auto start affected by the button operation tone on my Casio 3031 watch?

The alarms, hourly time signal, countdown alarm, and stopwatch auto start on your Casio 3031 watch are affected by the button operation tone for the following reasons: 1. The button operation tone is a sound that is produced whenever you press one of the watch's buttons. It serves as an audible feedback for button presses. 2. When you turn off the button operation tone, it also affects the alarms, hourly time signal, countdown alarm, and stopwatch auto start. However, these functions will still operate normally even with the button operation tone turned off. 3. The purpose of this design is to provide a silent operation for the watch, especially in situations where the button operation tone may be disruptive or unwanted, such as during meetings or in quiet environments. By turning off the button operation tone, you can ensure that the alarms, hourly time signal, countdown alarm, and stopwatch auto start functions on your Casio 3031 watch operate silently.

How does the automatic return feature work on my Casio 3031 watch?

The automatic return feature on your Casio 3031 watch works as follows: 1. If you leave the watch in the Alarm Mode for two or three minutes without performing any operation, it automatically changes to the Timekeeping Mode. 2. Similarly, if you leave a screen with flashing digits on the display for two or three minutes without performing any operation, the watch automatically exits the setting screen. The purpose of the automatic return feature is to ensure that the watch returns to the Timekeeping Mode or exits the setting screen when left idle for a certain period of time. This helps conserve battery life and prevents accidental changes to settings. By understanding how the automatic return feature works, you can use your Casio 3031 watch more efficiently and avoid unintended mode changes or settings adjustments.

Why does my Casio 3031 watch automatically change to the Timekeeping Mode when left in the Alarm Mode for a certain period of time?

Your Casio 3031 watch automatically changes to the Timekeeping Mode when left in the Alarm Mode for a certain period of time due to the following reasons: 1. The Alarm Mode is designed for setting and managing alarms on your watch. 2. When you enter the Alarm Mode and perform the desired alarm settings, the watch expects you to complete the necessary operations and exit the mode. 3. However, if you leave the watch in the Alarm Mode without performing any further operations for a specific duration (usually around two or three minutes), the watch assumes that you have finished setting the alarms and automatically switches back to the Timekeeping Mode. This automatic change to the Timekeeping Mode helps ensure that the watch returns to its default mode after a period of inactivity, preventing accidental changes to alarm settings and conserving battery life. By understanding this functionality, you can effectively manage your Casio 3031 watch's modes and ensure that it operates as intended.

How do I scroll through data on the display of my Casio 3031 watch using the B and D buttons?

To scroll through data on the display of your Casio 3031 watch using the B and D buttons, follow these steps: 1. In various modes and setting screens, the B and D buttons are used to scroll through data on the display. 2. Press the B button to scroll through the data in one direction, such as moving from one option to the next or scrolling through a list. 3. Press the D button to scroll through the data in the opposite direction, allowing you to navigate back or move to the previous option. 4. In most cases, holding down the B or D button during a scroll operation will increase the scrolling speed, allowing you to quickly move through the data. By using the B and D buttons, you can easily navigate and scroll through the data displayed on your Casio 3031 watch, whether it's selecting options, viewing lists, or moving between different screens.

How can I scroll at high speed through data on my Casio 3031 watch?

To scroll at high speed through data on your Casio 3031 watch, follow these steps: 1. Use the B and D buttons to navigate through various modes and setting screens. 2. When you need to scroll through data on the display, press and hold either the B or D button. 3. Holding down the B or D button during a scroll operation will increase the scrolling speed, allowing you to quickly move through the data. 4. Continue holding the button until you reach the desired position or data on the display. By holding down the B or D button, you can scroll at high speed through the data on your Casio 3031 watch. This feature enables efficient navigation and saves time when accessing information or adjusting settings.

Why does my Casio 3031 watch display the last viewed data when entering the World Time or Alarm Mode?

Your Casio 3031 watch displays the last viewed data when entering the World Time or Alarm Mode for the following reasons: 1. The watch is designed to remember the last viewed data in these modes to provide convenience and ease of use. 2. When you exit the World Time or Alarm Mode, the watch stores the information you were viewing, such as the time in different cities or the set alarm times. 3. When you re-enter the World Time or Alarm Mode, the watch automatically displays the last viewed data, allowing you to quickly access the information without having to re-enter it. 4. This feature saves time and effort, especially if you frequently need to refer to the same world time or alarm settings. By displaying the last viewed data, your Casio 3031 watch ensures that you can easily access and reference the information you were previously viewing in the World Time or Alarm Mode, enhancing the user experience and convenience.

How do I reset the seconds on my Casio 3031 watch?

To reset the seconds on your Casio 3031 watch, follow these steps: 1. In the Timekeeping Mode, hold down the A button until the seconds start to flash, indicating that you are in the setting screen. 2. Press the D button to reset the seconds to 00. 3. Press the A button to exit the setting screen and save the changes. By following these steps, you can easily reset the seconds on your Casio 3031 watch. This feature allows you to synchronize the time accurately and ensure that the seconds display starts from zero.

How do I set the year on my Casio 3031 watch?

To set the year on your Casio 3031 watch, follow these steps: 1. In the Timekeeping Mode, hold down the A button until the seconds start to flash, indicating that you are in the setting screen. 2. Press the D button repeatedly to navigate to the year setting. 3. Use the B button to decrease the year or the D button to increase the year until you reach the desired value. 4. After setting the year, press the A button to exit the setting screen and save the changes. By following these steps, you can easily set the year on your Casio 3031 watch. This allows you to keep the watch's date and time accurate and up to date.

How does the built-in full automatic calendar on my Casio 3031 watch work?

The built-in full automatic calendar on your Casio 3031 watch works as follows: 1. The watch automatically adjusts the date, including the day, month, and year, based on the current time and date information. 2. The watch uses the information you set, such as the time, to calculate and display the correct date. 3. The full automatic calendar takes into account the number of days in each month, including leap years, to ensure accurate date display. 4. The watch also considers daylight saving time (DST) adjustments, if applicable, to accurately reflect the current date and time. By relying on the built-in full automatic calendar, you can trust that your Casio 3031 watch will always display the correct date without the need for manual adjustments. This feature provides convenience and ensures that you stay on track with the current date and time.

Is the manual of the Casio 3031 available in English?

Yes, the manual of the Casio 3031 is available in English .

Is your question not listed? Ask your question here

No results