Canon ZR950 manual

Canon ZR950
5.3 · 1
PDF manual
 · 104 pages
English
manualCanon ZR950
4
In these safety instructions the word
“apparatus” or “product” refers to the Canon
Digital Video Camcorder ZR950 A and all its
accessories.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not install near any heat sources such

as radiators, heat registers, stoves, or
other apparatus (including amplifiers)
that produce heat.

8 Protect the power cord from being

walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.

9 Unplug this apparatus during lightning

storms or when unused for long periods
of time.

10 Read instructions — All the safety and

operating instructions should be read
before the product is operated.

11 Retain instructions — The safety and

operating instructions should be retained
for future reference.

12 Heed Warnings — All warnings on the

product and in the operating instructions
should be adhered to.

13 Follow instructions — All operating and

maintenance instructions should be
followed.

14 Cleaning — Unplug this product from the

wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as
recommended in this manual.

15 Avoid magnetic or electric fields — Do

not use the camera close to TV
transmitters, portable communication
devices or other sources of electric or
magnetic radiation. They may cause
picture interference, or permanently
damage the camera.

16 Water and Moisture — Hazard of electric

shock — Do not use this product near
water or in rainy/moist situations.

17 Placing or Moving — Do not place on an

unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child or adult, and
serious damage to the product. A
product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause
the product and cart combination to
overturn.

18 Power Sources — The product should

be operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power
supply to your home, consult your
product dealer or local power company.
Regarding other power sources such as
battery power, refer to instructions in this
manual.

19 Overloading — Do not overload wall

outlets and extension cords as this can
result in a risk of fire or electric shock.

20 Objects and Liquid Entry — Never push

objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out
parts that could result in a fire or electric
shock. Be careful not to spill liquid of any
kind onto the product.

21 Servicing — Do not attempt to service

this product yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.

22 Power Sources — The CA-590 Compact

Power Adapter should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
home, consult your product dealer or
local power company. Regarding other
power sources such as battery power,
refer to instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

View the manual for the Canon ZR950 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Canon ZR950 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon ZR950 is a camcorder that offers a range of features and capabilities for capturing high-quality videos. It boasts a powerful digital zoom of up to 2000x, allowing users to get close to the action even from a distance. Additionally, the camcorder features an impressive 48x optical zoom, providing even further flexibility in capturing distant subjects. With a total of 1.07 megapixels, the Canon ZR950 delivers detailed and clear images. Its 1/6" optical sensor size and CCD sensor type contribute to the overall image quality and help capture accurate colors and sharpness. The camcorder comes equipped with a viewfinder that has a resolution of approximately 114,000 pixels. This enables users to accurately frame their shots and achieve desired compositions. The viewfinder screen has a size of 0.33", allowing for easy viewing. The Canon ZR950 also features an LCD display with a resolution of 112,000 pixels. The 2.7" diagonal size of the display provides a clear, bright, and user-friendly interface for previewing footage and navigating through menus and settings. In terms of focus, the camcorder utilizes TTL (Through The Lens) technology, ensuring accurate and precise focusing of subjects. It can handle low-light conditions, with a minimum illumination requirement of 2 lx, allowing users to capture videos in various lighting environments. For connecting the camcorder to external devices, it offers a composite video out port. This enables users to display their videos on compatible screens or transfer them to other devices for further editing and sharing. Overall, the Canon ZR950 is a versatile and capable camcorder that offers a range of features for capturing high-quality videos. Its zoom capabilities, image quality, and user-friendly interface make it a reliable choice for both amateur and professional videographers.

General
BrandCanon
ModelZR950 | 2485B001
Productcamcorder
EAN0013803090062
LanguageEnglish
FiletypeUser manual (PDF)
Lens system
Digital zoom2000 x
Optical zoom48 x
Focal length range2.6 - 96.2 mm
Image sensor
Total megapixels1.07 MP
Optical sensor size1/6 "
Sensor typeCCD
Viewfinder
Viewfinder resolution114000 pixels
Viewfinder screen size0.33 "
Display
Display resolution112000 pixels
DisplayLCD
Display diagonal2.7 "
Other features
FocusTTL
Power consumption (typical)2.5 W
Storage
Camcorder tape typeMini-DV
Camera
Minimum illumination2 lx
Ports & interfaces
Composite video out1
Weight & dimensions
Weight380 g
Width57 mm
Depth119 mm
Height92 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon ZR950 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the weight of the Canon ZR950?

The Canon ZR950 has a weight of 380 g.

What is the screen size of the Canon ZR950?

The screen size of the Canon ZR950 is 2.7 ".

What is the height of the Canon ZR950?

The Canon ZR950 has a height of 92 mm.

What is the screen resolution of the display of the Canon ZR950?

The screen resolution of the Canon ZR950 is 112000 pixels.

What is the width of the Canon ZR950?

The Canon ZR950 has a width of 57 mm.

What is the depth of the Canon ZR950?

The Canon ZR950 has a depth of 119 mm.

Does the Canon ZR950 have a digital zoom feature?

Yes, the Canon ZR950 has a digital zoom of 2000x. This means that users can zoom in on their subjects up to 2000 times digitally, allowing them to get close-up shots from a distance.

Does the Canon ZR950 have an optical zoom feature?

Yes, the Canon ZR950 has an optical zoom of 48x. This means that users can zoom in on their subjects up to 48 times optically, without sacrificing image quality.

How many megapixels does the Canon ZR950 have?

The Canon ZR950 has a total of 1.07 megapixels. While this may not be the highest resolution available on the market, it is sufficient for capturing good quality footage and images.

What is the size of the optical sensor on the Canon ZR950?

The optical sensor size on the Canon ZR950 is 1/6 inch. This is a relatively small sensor size, which means that the camera may not perform as well in low-light situations compared to larger sensor sizes.

Does the Canon ZR950 have a LCD display?

Yes, the Canon ZR950 has a LCD display with a resolution of 112000 pixels. The 2.7-inch diagonal size of the display allows users to easily view their footage and navigate the camera's settings.

How do I troubleshoot if the Canon ZR950 camcorder is not turning on?

To troubleshoot if the Canon ZR950 camcorder is not turning on, you can follow these steps: 1. Check the battery: Ensure that the battery pack is properly inserted into the camcorder. If the battery is low or exhausted, replace it with a fully charged battery or connect the camcorder to a power source using the compact power adapter. 2. Verify the power source: Make sure that the compact power adapter is correctly connected to the camcorder and the power outlet. If the charge indicator on the camcorder flashes rapidly, it may indicate a faulty power adapter or battery pack. In such cases, consult a Canon Service Center. 3. Reset the camcorder: If the camcorder still does not turn on, disconnect all power sources, including the battery pack and the backup battery, and wait for a short time. Then reconnect the power sources. This will reset all the camcorder's settings. 4. Seek professional assistance: If the problem persists after following the above steps, it is recommended to consult your dealer or a Canon Service Center for further assistance. By following these troubleshooting steps, you should be able to identify and resolve the issue of the Canon ZR950 camcorder not turning on.

What should I do if the date and time settings on the Canon ZR950 camcorder are not being saved?

If the date and time settings on the Canon ZR950 camcorder are not being saved, you can try the following steps: 1. Access the date and time setup screen: Press the MENU button and navigate to the DATE/TIME SETUP option. 2. Adjust the date and time: Use the joystick to change each field of the date and time. Move the joystick to the next field after making the necessary adjustments. 3. Start the clock: Press the joystick to start the clock and save the new date and time settings. 4. Close the menu: Press the appropriate button to close the menu and return to the normal camcorder display. If the date and time settings are still not being saved after following these steps, you may need to reset the camcorder to its factory settings or consult a Canon Service Center for further assistance. By following these steps, you should be able to troubleshoot and resolve the issue of the date and time settings not being saved on the Canon ZR950 camcorder.

How can I troubleshoot if the buttons and switches on the Canon ZR950 camcorder are not responding?

To troubleshoot if the buttons and switches on the Canon ZR950 camcorder are not responding, you can follow these steps: 1. Check for any physical obstructions: Ensure that there are no objects or debris blocking the buttons or switches on the camcorder. Clean the buttons and switches gently with a soft cloth if necessary. 2. Verify the power source: Make sure that the camcorder has sufficient power. If the battery is low, replace it with a fully charged battery or connect the camcorder to a power source using the compact power adapter. 3. Restart the camcorder: Turn off the camcorder and remove the battery. Wait for a few seconds, then reinsert the battery and turn on the camcorder again. This can help reset the system and resolve any temporary issues. 4. Reset the camcorder settings: If the buttons and switches are still not responding, you can try resetting the camcorder to its factory settings. Refer to the manual for instructions on how to perform a factory reset. 5. Seek professional assistance: If the problem persists after following the above steps, it is recommended to contact a Canon Service Center or consult with a qualified technician for further assistance. By following these troubleshooting steps, you should be able to address the issue of unresponsive buttons and switches on the Canon ZR950 camcorder.

What should I do if the Canon ZR950 camcorder is not recording properly?

To troubleshoot if the Canon ZR950 camcorder is not recording properly, you can follow these steps: 1. Check the lens cover: Ensure that the lens cover is fully open by moving the lens cover switch down. If the lens cover is closed, it will obstruct the recording. 2. Verify the tape mode: Set the / switch to the "tape" position. This ensures that the camcorder is ready to record on the tape. 3. Set the camcorder to CAMERA mode: Press and hold the lock button, then set the switch to CAMERA mode. This prepares the camcorder for recording. 4. Start and pause recording: Press the button to begin recording. Press the button again to pause the recording. Ensure that you have a stable and calm picture while recording to avoid jittery scenes. 5. Stop recording: To stop recording, push the joystick toward the stop symbol. If the issue persists after following these steps, you may need to check the tape, clean the video heads, or consult a Canon Service Center for further assistance. By following these troubleshooting steps, you should be able to address the issue of the Canon ZR950 camcorder not recording properly.

How do I troubleshoot if the Canon ZR950 camcorder is displaying an error message?

To troubleshoot if the Canon ZR950 camcorder is displaying an error message, you can follow these steps: 1. Identify the error message: Take note of the specific error message displayed on the camcorder's screen. This will help in determining the appropriate troubleshooting steps. 2. Check the manual: Refer to the Canon ZR950 camcorder's manual for a list of error messages and their corresponding solutions. Look for the error message you encountered and follow the recommended steps provided in the manual. 3. Perform basic troubleshooting: In general, you can try the following steps as initial troubleshooting: - Turn off the camcorder and remove the battery. Wait for a few seconds, then reinsert the battery and turn on the camcorder again. - Check the connections, such as the power source or any cables, to ensure they are properly connected. - If the error message persists, try resetting the camcorder to its factory settings. Refer to the manual for instructions on how to perform a factory reset. 4. Contact customer support: If the error message continues to appear or if the manual does not provide a solution, it is recommended to contact Canon customer support or visit a Canon Service Center for further assistance. They will be able to provide specific troubleshooting steps or arrange for repairs if necessary. By following these troubleshooting steps, you should be able to address the issue of the Canon ZR950 camcorder displaying an error message.

How do I troubleshoot if the Canon ZR950 camcorder is not turning on?

To troubleshoot if the Canon ZR950 camcorder is not turning on, you can follow these steps: 1. Check the battery: Ensure that the battery pack is properly inserted into the camcorder. If the battery is low or exhausted, replace it with a fully charged battery or connect the camcorder to a power source using the compact power adapter. 2. Verify the power source: Make sure that the compact power adapter is correctly connected to the camcorder and the power outlet. If the charge indicator on the camcorder flashes rapidly, it may indicate a faulty power adapter or battery pack. In such cases, consult a Canon Service Center. 3. Reset the camcorder: If the camcorder still does not turn on, disconnect all power sources, including the battery pack and the backup battery, and wait for a short time. Then, reconnect the power sources. This will reset all the camcorder's settings. 4. Seek professional assistance: If the problem persists after following the above steps, it is recommended to consult your dealer or a Canon Service Center for further assistance. By following these troubleshooting steps, you should be able to identify and resolve the issue of the Canon ZR950 camcorder not turning on.

What should I do if the date and time settings on the Canon ZR950 camcorder are not being saved?

If the date and time settings on the Canon ZR950 camcorder are not being saved, you can try the following steps: 1. Access the date and time setup screen: Press the MENU button and navigate to the DATE/TIME SETUP option. 2. Adjust the date and time: Use the joystick to change each field of the date and time. Move the joystick to the next field after making the necessary adjustments. 3. Start the clock: Press the joystick to start the clock and save the new date and time settings. 4. Close the menu: Press the appropriate button to close the menu and return to the normal camcorder display. If the date and time settings are still not being saved after following these steps, you may need to reset the camcorder to its factory settings or consult a Canon Service Center for further assistance. By following these steps, you should be able to troubleshoot and resolve the issue of the date and time settings not being saved on the Canon ZR950 camcorder.

How can I troubleshoot if the buttons and switches on the Canon ZR950 camcorder are not responding?

To troubleshoot if the buttons and switches on the Canon ZR950 camcorder are not responding, you can follow these steps: 1. Check for any physical obstructions: Ensure that there are no objects or debris blocking the buttons or switches on the camcorder. Clean the surface of the buttons and switches if necessary. 2. Verify the power source: Make sure that the camcorder has sufficient power. If the battery is low, replace it with a fully charged battery or connect the camcorder to a power source using the compact power adapter. 3. Restart the camcorder: Turn off the camcorder and remove the battery. Wait for a few seconds, then reinsert the battery and turn on the camcorder again. This can help reset the system and resolve any temporary issues. 4. Reset the camcorder settings: If the buttons and switches are still not responding, you can try resetting the camcorder to its factory settings. Refer to the manual for instructions on how to perform a factory reset. 5. Seek professional assistance: If the problem persists after following the above steps, it is recommended to consult your dealer or a Canon Service Center for further assistance. By following these troubleshooting steps, you should be able to identify and resolve the issue of the buttons and switches not responding on the Canon ZR950 camcorder.

What should I do if the Canon ZR950 camcorder is not recording properly?

To troubleshoot if the Canon ZR950 camcorder is not recording properly, you can follow these steps: 1. Check the lens cover: Ensure that the lens cover is fully open by moving the lens cover switch down. If the lens cover is closed, it will obstruct the recording. 2. Verify the tape switch: Set the / switch to the "tape" position. This allows the camcorder to record onto the tape. 3. Set the camcorder to CAMERA mode: Press and hold the lock button, then set the switch to CAMERA mode. This prepares the camcorder for recording. 4. Start and pause recording: Press the record button ( ) to begin recording. Press it again to pause the recording. Make sure to have a stable and calm picture while recording to avoid jittery scenes. 5. Stop recording: To stop recording, push the joystick ( ) toward the stop symbol. If the issue persists after following these steps, you may need to perform a test recording, clean the video heads, or seek further assistance from a Canon Service Center. By following these troubleshooting steps, you should be able to address the issue of the Canon ZR950 camcorder not recording properly.

How do I troubleshoot if the Canon ZR950 camcorder is displaying an error message?

To troubleshoot if the Canon ZR950 camcorder is displaying an error message, you can follow these steps: 1. Identify the error message: Take note of the specific error message displayed on the camcorder's screen. This will help in determining the appropriate troubleshooting steps. 2. Check the manual: Refer to the Canon ZR950 camcorder's manual for a list of error messages and their corresponding solutions. Look for the error message you encountered and follow the recommended steps provided in the manual. 3. Perform basic troubleshooting: In general, you can try the following steps as initial troubleshooting: - Turn off the camcorder and remove the battery. Wait for a few seconds, then reinsert the battery and turn on the camcorder again. - Check the connections, such as the power source, cables, and memory card, to ensure they are properly connected and functioning. - If the error message persists, try resetting the camcorder to its factory settings. Refer to the manual for instructions on how to perform a factory reset. 4. Contact customer support: If the error message continues to appear after following the above steps, it is recommended to contact Canon customer support or a Canon Service Center for further assistance. Provide them with the specific error message and any relevant details for a more accurate diagnosis and resolution. By following these troubleshooting steps, you should be able to address the issue of the Canon ZR950 camcorder displaying an error message.

Is the manual of the Canon ZR950 available in English?

Yes, the manual of the Canon ZR950 is available in English .

Is your question not listed? Ask your question here

No results