Canon ZR 200 manual

Canon ZR 200
7.4 · 1
PDF manual
 · 152 pages
English
manualCanon ZR 200
2
Introducti on

Important Usage Instructions

Important Warning
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of
copyright owners and be contrary to copyright laws.
Digital Video Camcorder, ZR300/ZR200 systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and use in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure, that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point, within an
equilateral triangle, is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product.

View the manual for the Canon ZR 200 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Canon ZR 200 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon ZR 200 is a camcorder that offers a range of features for capturing videos. It is designed to be compact and lightweight, making it easy to carry and handle. The camcorder features a zoom lens, allowing users to capture close-up shots and achieve greater detail in their videos. It also has a built-in microphone, enabling the recording of audio along with video footage. The Canon ZR 200 uses MiniDV tapes for recording, offering a convenient and reliable method for storing recorded videos. It supports both manual and automatic focus, giving users control over their shots and ensuring sharp and clear images. The camcorder also allows for exposure control, allowing users to adjust the brightness and contrast of their videos. In terms of connectivity, the Canon ZR 200 offers an AV output, allowing users to connect the camcorder to external devices such as TVs for playback. It also has a USB port, making it easy to transfer videos to a computer for editing and sharing. Overall, the Canon ZR 200 is a functional and practical camcorder that is suitable for capturing everyday videos. Its compact design and range of features make it a versatile option for those looking to document their experiences. However, it is important to note that specific specifications may vary, so it is advisable to refer to the product manual or consult with the manufacturer for detailed information.

General
BrandCanon
ModelZR 200
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon ZR 200 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

How do I protect the Canon ZR 200 camcorder from rain or moisture?

To protect the Canon ZR 200 camcorder from rain or moisture, follow these steps: 1. Avoid exposing the camcorder to rain or moisture: The manual states that exposing the camcorder to rain or moisture can increase the risk of fire or electric shock. Therefore, it is important to keep the camcorder dry and protected from any water sources. 2. Store the camcorder in a dry place: When not in use, store the camcorder in a location that is free from dust and has low humidity. It is recommended to store the camcorder at temperatures not exceeding 30°C (86°F). 3. Handle the camcorder with care: Avoid subjecting the camcorder to shocks or vibrations, as this can potentially damage its internal components. Be cautious when carrying or using the camcorder to prevent any accidental drops or impacts. 4. Avoid extreme temperature changes: Rapidly moving the camcorder between hot and cold temperatures can cause condensation to form on its internal surfaces. To prevent this, allow the camcorder to adjust to the ambient temperature before using it. 5. Clean the camcorder properly: Use a soft, dry cloth to clean the camcorder body and lens. Avoid using chemically treated cloths or volatile solvents. For the LCD screen, use a commercially available cleaning cloth for glasses. If condensation forms on the screen, gently wipe it with a soft, dry cloth. By following these steps, you can help protect the Canon ZR 200 camcorder from rain or moisture and ensure its optimal performance.

How can I change the display language of the Canon ZR 200 camcorder?

To change the display language of the Canon ZR 200 camcorder, follow these steps: 1. Open the menu: Press the menu button on the camcorder to access the menu options. 2. Select "DISPLAY SETUP/": Navigate through the menu using the arrow buttons until you find the "DISPLAY SETUP/" option. Press the select button to enter the submenu. 3. Select "LANGUAGE": Within the "DISPLAY SETUP/" submenu, locate the "LANGUAGE" option. Use the arrow buttons to highlight it and press the select button to enter the language selection menu. 4. Choose a language: Scroll through the available languages using the arrow buttons until you find the desired language. Press the select button to confirm your selection. 5. Close the menu: Exit the menu by pressing the menu button again. The display language of the Canon ZR 200 camcorder will now be changed to the selected language. Please note that the available set of languages may vary depending on the region. Refer to the language options provided in the menu for your specific camcorder model.

What functions can I use in each operating mode of the Canon ZR 200 camcorder?

In the Canon ZR 200 camcorder, the available functions vary depending on the operating mode. Here are the functions available in each mode: 1. CAMERA mode: - Image Stabilizer (on) - Focus (Auto setting) - White Balance (Auto setting) - Wind screen (Auto setting) - Shutter Speed (Auto setting) - AE Shift - Digital Effects - Card Mix 2. PLAY (VCR) mode: - Playback of recorded videos 3. CARD CAMERA mode: - Recording videos to a memory card 4. CARD PLAY mode: - Playback of videos stored on a memory card Please note that these functions are specific to the Canon ZR 200 camcorder and may vary for different models. Refer to the manual for more detailed information on each function and how to access them in each operating mode. Please let me know if there's anything else I can assist you with.

How do I navigate through the menu options in the camera and play modes of the Canon ZR 200 camcorder?

To navigate through the menu options in the camera and play modes of the Canon ZR 200 camcorder, follow these steps: 1. Press the MENU button: This will open the menu on the screen. 2. Turn the SET dial: Use the SET dial to scroll and select a submenu within the menu options. Press the SET dial to confirm your selection. 3. Turn the SET dial again: Within the selected submenu, use the SET dial to scroll and select a specific menu item. Press the SET dial to enter the menu item. 4. Adjust the setting: Use the SET dial to scroll and select the desired setting option for the menu item. 5. Close the menu: Press the MENU button to close the menu and return to the camera or play mode. Note that when setting options like white balance, shutter speed, or language, press the SET dial first before pressing the MENU button. This ensures that your selection is saved. Please refer to the manual for a complete list of available menu options and their corresponding settings. If you have any further questions, feel free to ask.

How do I troubleshoot issues with recording or playback on the Canon ZR 200 camcorder?

To troubleshoot issues with recording or playback on the Canon ZR 200 camcorder, follow these steps: 1. No playback or playback does not start: - Ensure that the camcorder is turned on and set to PLAY (VCR) mode. - Check that the TAPE/CARD switch is set to TAPE. - Make sure a cassette is loaded and not at the end. - If the image does not appear on the TV screen, check if [AV DV] is set to [ON]. Set it to [OFF]. - If the TV/VIDEO selector on the TV is not set to VIDEO, adjust it accordingly. - Clean the video heads if they are dirty. 2. No sound from the built-in speaker: - Adjust the speaker volume using the SET dial. 3. Issues with dubbing via the DV terminal: - Check if [AV DV] is set to [ON]. Set it to [OFF]. - Ensure the correct signal format is used for dubbing. For playback, set the camcorder to PLAY (VCR) mode, open the LCD panel, rewind the tape, and press the / button to begin playback. Press the button to stop playback. Please note that these troubleshooting steps are specific to the Canon ZR 200 camcorder and may vary for different models.

Is the manual of the Canon ZR 200 available in English?

Yes, the manual of the Canon ZR 200 is available in English .

Is your question not listed? Ask your question here

No results