Canon XJ27x6.5B AF Digisuper manual

Canon XJ27x6.5B AF Digisuper
6.2 · 1
PDF manual
 · 136 pages
English
manualCanon XJ27x6.5B AF Digisuper
E8
2 PREPARATION
E9
5
Bring the object into focus by focus operation.
6
Set the lens to the widest angle.
7
Loosen the F.B. lock knob, and then turn the F.B.
adjusting knob to bring the object into focus.
8
Repeat steps 4 to 7 several times, until the object
is brought into focus at both the widest angle and
telephoto ends.
9
After making sure that the object is in sharp focus,
tighten the F.B. lock knob.
The adjustment procedure is now completed.

2-3 Removing and

Installing the Lens

Shroud

When any electrical setting or adjustment is required,
remove and install the lens shroud following the steps
below.
Fastener type
1
Release the fasteners on both sides of the lens
shroud, then pull the shroud forward to remove from
the lens body.
2
When installing the lens shroud back in place, align
the shroud to the guide rails of the lens body, and then
push the shroud until it stops at the end of the mount.
Press the shroud fasteners near to the end of the
mount side to lock the shroud.
Fastener
Recessed Handle
(Both sides of the lens)
Lens Shroud

* (NOTE)

Make sure that the fasteners of the lens shroud are always locked
when it is mounted on the lens.
Knob type
1
Turn the shroud mounting knobs on the bottom of the
lens shroud counterclockwise.
2
Hold two recessed handles on both side of the lens
shroud, and then pull and remove the shroud from the
lens body.
Shroud
mounting knobs
Recessed Handle
(Both sides of the lens)
Lens Shroud
3
When putting the lens shroud back on the lens body,
align the shroud to the guide rails of the lens body, and
then push the shroud until it is stopped at the end of
the mount.
Turn the shroud mounting knobs on the bottom
clockwise.

* (NOTE)

With the lens shroud mounted on the lens, check that the shroud
mounting knobs are secured tightly at all times. If these knobs are
not perfectly tight, the lens shroud may work free from the main unit
and drop off when the camera is tilted down.

2-4 Iris Gain Adjustment

The iris gain is set to the middle of the adjusting range at
the factory. However, if the iris gain needs to be changed
for some reason, follow the steps below. These steps can
be taken by the trimmer adjustment or on the information
display. (The setting implemented last takes precedence)

* (NOTE)

For other iris adjustment such as iris ends adjustment or video level
adjustment when the extender is used, contact Canon dealer or
your Canon sales representative.

Manual

View the manual for the Canon XJ27x6.5B AF Digisuper here, for free. This manual comes under the category lenses and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Canon XJ27x6.5B AF Digisuper or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon XJ27x6.5B AF Digisuper specifications

Below you will find the product specifications and the manual specifications of the Canon XJ27x6.5B AF Digisuper.

General
BrandCanon
ModelXJ27x6.5B AF Digisuper
Productlens
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon XJ27x6.5B AF Digisuper below.

Is the manual of the Canon XJ27x6.5B AF Digisuper available in English?

Yes, the manual of the Canon XJ27x6.5B AF Digisuper is available in English .

Is your question not listed? Ask your question here

No results