Canon XA30 manual

Canon XA30
9.2 · 2
PDF manual
 · 192 pages
English
manualCanon XA30
Troubleshooting
169

List of Messages for Wi-Fi Functions

Refer also to the instruction manual of your access point and other devices you will use.
To record video on this memory card, it is recommended to use a video quality setting other
than [59.94P Recording].
- When using a memory card rated SD Speed Class 2 or 4, you may not be able to record
movies if you use a recording mode of 28 Mbps LPCM (59.94P), 28 Mbps (59.94P) or 35 Mbps
(59.94P).
To use this function change the camera mode to Manual or Cinema
- C, the CUSTOM dial (A 99) and some of the functions that can be assigned to the
assignable buttons (A 100) cannot be used in mode. Set the mode switch to n (
mode) or E( mode) to use them.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Unable to recognize the data
- The camcorder cannot recognize data that was recorded using a video configuration that is not
supported (PAL or SECAM).
Unable to recover data
- Could not recover a corrupted file. Save your recordings (A 118) and initialize the memory
card using the [Complete Initialization] option (A 38).
Another user is already controlling the camcorder. Try again later.
- This message appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to
connect with the camcorder. Make sure only one Wi-Fi device is trying to connect and then
touch Retry.
IP address conflict
- Change the camcorder’s IP address to avoid any conflict with devices connected to the same
network. Alternatively, change the IP address of the conflicting device.
Memory card cover is open
- The double memory card slot cover was opened while the memory card was being accessed.
Stop the Wi-Fi function in use and end the Wi-Fi connection.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal at the same time. Try the operation
again later or perform setup using the [WPS: PIN Code] or [Search for Access Points] option
(A 141).
No access points found
- The access point set in the camcorder could not be found.
- Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the
wireless signal. Try using the camcorder in a location farther away from such appliances.
- Make sure that you use the access point’s SSID for the camcorder’s Wi-Fi settings (A 142).
- If the access point is using MAC address filtering, enter the camcorder’s MAC address in the
access point’s configuration screen.
Unable to access configuration files
- Turn off the camcorder. After a short while, turn it on again. If the problem persists contact a
Canon Service Center.

View the manual for the Canon XA30 here, for free. This manual comes under the category camcorders and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Canon XA30 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon XA30 is a camcorder that offers a range of features for capturing high-quality videos. It is equipped with a CMOS sensor type and has a total of 3.09 megapixels, ensuring clear and detailed images. The camcorder has an optical zoom of 20x and a digital zoom of 400x, allowing users to get close to the action. With face detection technology, the Canon XA30 is capable of automatically detecting and focusing on faces in a scene. This ensures that subjects are always in sharp focus. The camcorder also offers manual focus adjustment for added control. Featuring various video formats supported, including AVCHD, H.264, MP4, and MPEG4, the Canon XA30 offers flexibility in recording and storing videos. It also supports multiple analog signal format systems, specifically NTSC. The DC-in jack allows for continuous power supply during recording, eliminating the need to rely solely on battery power. The Canon XA30 comes with a range of white balance options, including Auto, Cloudy, Daylight, Fluorescent, Fluorescent H, Shade, and Tungsten. This ensures accurate color reproduction in various lighting conditions. This camcorder has a camera shutter speed of 1/2000s, enabling users to capture fast-moving subjects with precision. Its closest focusing distance is 0.02 meters, allowing for detailed close-up shots. Overall, the Canon XA30 is a feature-packed camcorder that provides users with the tools they need to capture high-quality videos. With its versatile zoom capabilities, face detection technology, and range of video formats supported, it offers flexibility and control. The camcorder's durable construction and reliable performance make it a suitable choice for capturing memorable moments.

General
BrandCanon
ModelXA30 | 8714574648347
Productcamcorder
EAN8714574648347
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
DC-in jackYes
USB connectivityYes
Mini HDMI ports quantity1
Headphone outputs1
HDMIYes
Microphone inYes
Headphone connectivity3.5 mm
PictBridgeNo
Component video (YPbPr/YCbCr) out-
S-Video outNo
USB 2.0 ports quantity-
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity-
Video
Analog signal format systemNTSC
Video formats supportedAVCHD, H.264, MP4, MPEG4
HD typeFull HD
Maximum video resolution- pixels
Audio
Audio formats supportedLC-AAC, LPCM
Image sensor
Sensor typeCMOS
Total megapixels3.09 MP
Optical sensor size1/2.84 "
Lens system
Optical zoom20 x
Digital zoom400 x
Focal length range3.67 - 73.4 mm
Focal length (35mm film equivalent)26.8 - 576 mm
Image stabilizer typeHybrid Image Stabilization (HIS)
Filter size58 mm
Image stabilizerYes
Interchangeable lens-
Focusing
Face detectionYes
Focus adjustmentManual
Closest focusing distance0.02 m
Shutter
Camera shutter speed1/2000 s
White balance
White balanceAuto, Cloudy, Daylight, Fluorescent, Fluorescent H, Shade, Tungsten
Camera
Minimum illumination0.1 lx
3DNo
Camcorder typeHandheld camcorder
Viewfinder
Viewfinder typeElectronic
Viewfinder screen size0.24 "
Display
Display diagonal3.5 "
Built-in displayYes
DisplayOLED
TouchscreenYes
Flip-out screenYes
Storage
Compatible memory cardsSD, SDHC, SDXC
Memory slots2
Camcorder media typeMemory card
Internal storage capacity- GB
Disc types supported-
Camcorder tape type-
Flash
Shoe mounting point typeCold shoe
Shoe mounting pointYes
Built-in flash-
Built-in light-
Operational conditions
Operating temperature (T-T)-5 - 45 °C
Operating relative humidity (H-H)0 - 60 %
Weight & dimensions
Width109 mm
Depth182 mm
Height84 mm
Weight765 g
Still image
Maximum image resolution- pixels
Design
Product colorBlack
Battery
Battery technology-
Battery voltage7.4 V
Battery life (max)- h
Battery capacity- mAh
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon XA30 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the weight of the Canon XA30?

The Canon XA30 has a weight of 765 g.

What is the screen size of the Canon XA30?

The screen size of the Canon XA30 is 3.5 ".

What is the height of the Canon XA30?

The Canon XA30 has a height of 84 mm.

What is the width of the Canon XA30?

The Canon XA30 has a width of 109 mm.

What is the depth of the Canon XA30?

The Canon XA30 has a depth of 182 mm.

How much storage capacity does the Canon XA30 have?

The Canon XA30 has - GB storage capacity.

How do I adjust the exposure settings on the Canon XA30 camcorder?

To adjust the exposure settings on the Canon XA30, navigate to the menu, select the "Exposure" option, and then use the manual controls to set the desired exposure level.

What steps should I follow to focus manually using the Canon XA30?

To manually focus using the Canon XA30, select the manual focus mode on the touchscreen, then rotate the focus ring on the lens until your subject appears sharp and clear in the viewfinder.

How can I improve the audio quality when recording with the Canon XA30?

To improve audio quality on the Canon XA30, use an external microphone connected to the dedicated XLR input. Ensure that the microphone is properly positioned and adjust the audio levels in the menu for optimal sound recording.

How can I connect my Canon XA30 to an external monitor for better viewing?

To connect your Canon XA30 to an external monitor, use the HDMI output on the camcorder and connect it to the HDMI input of your desired external display. Make sure both devices are powered on and set to the correct input source.

How do I transfer recorded videos from the Canon XA30 to my computer?

To transfer recorded videos from the Canon XA30 to your computer, connect the camcorder to your computer using the USB cable provided. Once connected, your computer should recognize the camcorder as an external storage device, allowing you to browse and copy the videos to your computer's local storage.

Does the Canon XA30 have a DC-in jack?

Yes. This means that the camcorder can be powered directly from a DC power source, providing convenience to the user.

What is the analog signal format system of the Canon XA30?

NTSC. This means that the camcorder is compatible with the NTSC video standard used in North America, Japan, and other regions, allowing for easy playback on NTSC-compatible devices.

What video formats are supported by the Canon XA30?

AVCHD, H.264, MP4, MPEG4. This means that the camcorder can record and playback videos in multiple popular formats, providing flexibility for different usage scenarios and compatibility with various devices.

What type of sensor does the Canon XA30 have?

CMOS. This means that the camcorder utilizes a CMOS sensor, which generally offers better low-light performance and higher image quality compared to CCD sensors.

Does the Canon XA30 have face detection?

Yes. This means that the camcorder can automatically detect and focus on human faces when capturing videos or taking photos, making it easier to capture clear and well-focused shots of people.

Is the manual of the Canon XA30 available in English?

Yes, the manual of the Canon XA30 is available in English .

Is your question not listed? Ask your question here

No results