Canon XA30 manual

Canon XA30
9.2 · 2
PDF manual
 · 192 pages
English
manualCanon XA30

Troubleshooting

165

Wireless playback on a computer or similar device is not smooth.

- Playback may not be smooth depending on the access point’s settings and capability.

- Connect the computer or similar device to the access point using a LAN cable.

- Remove any objects between the camcorder and access point that may interfere with the

wireless signal.

- Move the camcorder closer to the access point.

- Turn off the wireless functions of other wireless devices other than the computer or similar

device being used for playback.

- Switch the wireless router to IEEE 802.11n. Refer to its instruction manual for details.
- If these do not solve the issue, the cause may be due the device or conditions unique to the

surrounding area. Use the supplied High Speed HDMI cable to connect the camcorder to a TV

(A 177).

The wireless connection was interrupted while transferring files.

- Incomplete files may remain at the transfer destination. If incomplete files remain at the transfer
destination, check the content and make sure they are safe to delete before deleting them.

- Select [New Files] and perform the file transfer again.

Cannot connect a Wi-Fi-enabled external device wirelessly to the camcorder.

-Use the q > [Reset All] setting to reset the camcorder. The camcorder's SSID will return
to the default setting and the password will return to not being configured so set the password
again. Then, delete the previous network settings from the external device and try connect it to

the camcorder.

List of Messages

Refer to List of Messages for Wi-Fi Functions (A 169) for a list of messages related to Wi-Fi

functions.

Accessing the memory card. Do not remove the memory card.

- You opened the double memory card slot cover while the camcorder was accessing the

memory card or the camcorder started accessing the memory card as you opened the double

memory card slot cover. Do not remove the memory card until this message disappears.

Back up recordings regularly

- This message may appear when you turn on the camcorder. In the event of a malfunction,

recordings may be lost so back up your recordings regularly.

Battery pack is not compatible. Turning off the camcorder.

- A battery pack not recommended by Canon for use with this camcorder was attached and the

camcorder was turned on. The camcorder will automatically turn off in 4 seconds.

Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there may

be a problem with the camcorder or battery pack. Consult a Canon Service Center.

Cannot convert scenes recorded at 59.94P

- Scenes that were recorded with a recording mode of 28 Mbps LPCM (59.94P), 28 Mbps

(59.94P) or 35 Mbps (59.94P) cannot be converted.

(in alphabetical order)

View the manual for the Canon XA30 here, for free. This manual comes under the category camcorders and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Canon XA30 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon XA30 is a camcorder that offers a range of features for capturing high-quality videos. It is equipped with a CMOS sensor type and has a total of 3.09 megapixels, ensuring clear and detailed images. The camcorder has an optical zoom of 20x and a digital zoom of 400x, allowing users to get close to the action. With face detection technology, the Canon XA30 is capable of automatically detecting and focusing on faces in a scene. This ensures that subjects are always in sharp focus. The camcorder also offers manual focus adjustment for added control. Featuring various video formats supported, including AVCHD, H.264, MP4, and MPEG4, the Canon XA30 offers flexibility in recording and storing videos. It also supports multiple analog signal format systems, specifically NTSC. The DC-in jack allows for continuous power supply during recording, eliminating the need to rely solely on battery power. The Canon XA30 comes with a range of white balance options, including Auto, Cloudy, Daylight, Fluorescent, Fluorescent H, Shade, and Tungsten. This ensures accurate color reproduction in various lighting conditions. This camcorder has a camera shutter speed of 1/2000s, enabling users to capture fast-moving subjects with precision. Its closest focusing distance is 0.02 meters, allowing for detailed close-up shots. Overall, the Canon XA30 is a feature-packed camcorder that provides users with the tools they need to capture high-quality videos. With its versatile zoom capabilities, face detection technology, and range of video formats supported, it offers flexibility and control. The camcorder's durable construction and reliable performance make it a suitable choice for capturing memorable moments.

General
BrandCanon
ModelXA30 | 8714574648347
Productcamcorder
EAN8714574648347
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
DC-in jackYes
USB connectivityYes
Mini HDMI ports quantity1
Headphone outputs1
HDMIYes
Microphone inYes
Headphone connectivity3.5 mm
PictBridgeNo
Component video (YPbPr/YCbCr) out-
S-Video outNo
USB 2.0 ports quantity-
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity-
Video
Analog signal format systemNTSC
Video formats supportedAVCHD, H.264, MP4, MPEG4
HD typeFull HD
Maximum video resolution- pixels
Audio
Audio formats supportedLC-AAC, LPCM
Image sensor
Sensor typeCMOS
Total megapixels3.09 MP
Optical sensor size1/2.84 "
Lens system
Optical zoom20 x
Digital zoom400 x
Focal length range3.67 - 73.4 mm
Focal length (35mm film equivalent)26.8 - 576 mm
Image stabilizer typeHybrid Image Stabilization (HIS)
Filter size58 mm
Image stabilizerYes
Interchangeable lens-
Focusing
Face detectionYes
Focus adjustmentManual
Closest focusing distance0.02 m
Shutter
Camera shutter speed1/2000 s
White balance
White balanceAuto, Cloudy, Daylight, Fluorescent, Fluorescent H, Shade, Tungsten
Camera
Minimum illumination0.1 lx
3DNo
Camcorder typeHandheld camcorder
Viewfinder
Viewfinder typeElectronic
Viewfinder screen size0.24 "
Display
Display diagonal3.5 "
Built-in displayYes
DisplayOLED
TouchscreenYes
Flip-out screenYes
Storage
Compatible memory cardsSD, SDHC, SDXC
Memory slots2
Camcorder media typeMemory card
Internal storage capacity- GB
Disc types supported-
Camcorder tape type-
Flash
Shoe mounting point typeCold shoe
Shoe mounting pointYes
Built-in flash-
Built-in light-
Operational conditions
Operating temperature (T-T)-5 - 45 °C
Operating relative humidity (H-H)0 - 60 %
Weight & dimensions
Width109 mm
Depth182 mm
Height84 mm
Weight765 g
Still image
Maximum image resolution- pixels
Design
Product colorBlack
Battery
Battery technology-
Battery voltage7.4 V
Battery life (max)- h
Battery capacity- mAh
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon XA30 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the weight of the Canon XA30?

The Canon XA30 has a weight of 765 g.

What is the screen size of the Canon XA30?

The screen size of the Canon XA30 is 3.5 ".

What is the height of the Canon XA30?

The Canon XA30 has a height of 84 mm.

What is the width of the Canon XA30?

The Canon XA30 has a width of 109 mm.

What is the depth of the Canon XA30?

The Canon XA30 has a depth of 182 mm.

How much storage capacity does the Canon XA30 have?

The Canon XA30 has - GB storage capacity.

How do I adjust the exposure settings on the Canon XA30 camcorder?

To adjust the exposure settings on the Canon XA30, navigate to the menu, select the "Exposure" option, and then use the manual controls to set the desired exposure level.

What steps should I follow to focus manually using the Canon XA30?

To manually focus using the Canon XA30, select the manual focus mode on the touchscreen, then rotate the focus ring on the lens until your subject appears sharp and clear in the viewfinder.

How can I improve the audio quality when recording with the Canon XA30?

To improve audio quality on the Canon XA30, use an external microphone connected to the dedicated XLR input. Ensure that the microphone is properly positioned and adjust the audio levels in the menu for optimal sound recording.

How can I connect my Canon XA30 to an external monitor for better viewing?

To connect your Canon XA30 to an external monitor, use the HDMI output on the camcorder and connect it to the HDMI input of your desired external display. Make sure both devices are powered on and set to the correct input source.

How do I transfer recorded videos from the Canon XA30 to my computer?

To transfer recorded videos from the Canon XA30 to your computer, connect the camcorder to your computer using the USB cable provided. Once connected, your computer should recognize the camcorder as an external storage device, allowing you to browse and copy the videos to your computer's local storage.

Does the Canon XA30 have a DC-in jack?

Yes. This means that the camcorder can be powered directly from a DC power source, providing convenience to the user.

What is the analog signal format system of the Canon XA30?

NTSC. This means that the camcorder is compatible with the NTSC video standard used in North America, Japan, and other regions, allowing for easy playback on NTSC-compatible devices.

What video formats are supported by the Canon XA30?

AVCHD, H.264, MP4, MPEG4. This means that the camcorder can record and playback videos in multiple popular formats, providing flexibility for different usage scenarios and compatibility with various devices.

What type of sensor does the Canon XA30 have?

CMOS. This means that the camcorder utilizes a CMOS sensor, which generally offers better low-light performance and higher image quality compared to CCD sensors.

Does the Canon XA30 have face detection?

Yes. This means that the camcorder can automatically detect and focus on human faces when capturing videos or taking photos, making it easier to capture clear and well-focused shots of people.

Is the manual of the Canon XA30 available in English?

Yes, the manual of the Canon XA30 is available in English .

Is your question not listed? Ask your question here

No results