Canon VIXIA HV40 manual

Canon VIXIA HV40
7.4 · 1
PDF manual
 · 114 pages
English
manualCanon VIXIA HV40
Do’s and Don’ts
99
Additional Information

Cleaning the Video Heads

In the following cases the video heads
are dirty and need to be cleaned.
- The message “HEADS DIRTY, USE
CLEANING CASSETTE” appears.
- During playback you notice frequent
video problems (blocky video artifacts,
banding, etc.).
- When playing back a tape recorded in
HDV standard the playback is jerky or the
sound stutters on and off.
To maintain the best picture quality, we
recommend using cassettes designed for
high definition recording (Canon Digital
Videocassette HDVM-E63PR, etc.) and
cleaning the video heads frequently with
the Canon DVM-CL Digital Video Head
Cleaning Cassette or a commercially
available dry cleaning cassette.
Do not use wet type cleaning cassettes
as this may damage the camcorder.
Even after cleaning the video heads
you may not be able to play back
correctly tapes that were recorded with
dirty video heads.

Cleaning the Camcorder

Camcorder Body
Use a soft, dry cloth to clean the
camcorder body. Never use chemically
treated cloth or volatile solvents such as
paint thinner.
Lens and Viewfinder
If the lens surface is dirty, the autofocus
may not work properly.
Remove any dust or dirt particles using
a non-aerosol type blower brush.
Use a clean, soft lens-cleaning cloth to
gently wipe the lens or viewfinder. Never
use tissue paper.
LCD Screen and I.AF sensor
Clean the LCD screen and the I.AF
sensor using a clean, soft lens-cleaning
cloth.
Condensation may form on the surface
of the screen when the temperature
changes suddenly. Wipe it with a soft dry
cloth.

Storage

If you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and at
temperatures not higher than 30 °C
(86 °F).

Condensation

Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form on
its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
Condensation may form in the following
cases:
When the camcorder is moved from an
air-conditioned room to a warm, humid
place

Maintenance/Others

COPY

View the manual for the Canon VIXIA HV40 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Canon VIXIA HV40 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon VIXIA HV40 is a camcorder that was released in 2009. It features a compact and lightweight design, making it easy to carry around and use. The camcorder is equipped with a 2.96-megapixel CMOS sensor, which allows for the capture of high-quality video footage. One of the standout features of the Canon VIXIA HV40 is its ability to record video in HDV format, providing users with stunningly clear and detailed footage. It also has an advanced image stabilization system, which helps to reduce camera shake and produce steady videos. The camcorder comes with a 10x optical zoom lens, allowing users to get close to the action and capture detailed shots from a distance. It also has a 2.7-inch LCD screen, which provides a clear view of the footage being recorded. In terms of connectivity, the Canon VIXIA HV40 offers several options. It has an HDMI output, allowing users to connect the camcorder to a high-definition television for easy playback. It also has a USB port, which enables the transfer of footage to a computer for editing and sharing. Overall, the Canon VIXIA HV40 is a reliable and durable camcorder that delivers high-quality video footage. Its compact design and advanced features make it a great choice for any videographer.

General
BrandCanon
ModelVIXIA HV40
Productcamcorder
EAN0013803113006
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon VIXIA HV40 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

How do I adjust the focus on the Canon VIXIA HV40 camcorder?

To adjust the focus on the Canon VIXIA HV40 camcorder, follow these steps: 1. Make sure the camcorder is in manual focus mode. Press the mode switch until "MF" appears on the screen. 2. Adjust the focus using the FOCUS dial. Turn the dial until the image appears focused. You can also press the "FOCUS" button or use the CUSTOM key to magnify the picture, making it easier to focus accurately. 3. If you want to switch back to autofocus mode, simply press the autofocus button again. Additionally, the camcorder has an Infinity Focus function that allows you to focus on faraway subjects such as mountains or fireworks. To use this function, adjust the zoom and then press and hold the autofocus button for more than 2 seconds. The "Infinity Focus" icon will appear on the screen. You can also magnify the image on the screen to make manual focusing easier. This feature allows you to focus on the magnified portion of the image. Refer to page 12 of the manual for more information on how to use this feature. Please note that these instructions are based on the Canon VIXIA HV40 camcorder and may not apply to other models.

Why is the image stabilization not working properly on my Canon VIXIA HV40 camcorder?

The image stabilization may not be working properly on your Canon VIXIA HV40 camcorder due to the following reasons: 1. Make sure the image stabilization feature is turned on. Check the settings menu and ensure that the image stabilization is enabled. 2. Verify that the camcorder is not in a mode where the image stabilization is automatically disabled. For example, in the "Night" recording program, the image stabilization may not function effectively. 3. Ensure that the camcorder is not mounted on a tripod while using the image stabilization feature. The image stabilization is designed to compensate for handheld camera shake and may not work optimally when the camcorder is stabilized on a tripod. 4. Check the battery level of the camcorder. If the battery is low, it may affect the performance of the image stabilization. Replace or recharge the battery if necessary. 5. If the issue persists, try resetting the camcorder to its factory settings. Refer to the manual for instructions on how to perform a reset. Please note that these troubleshooting steps are specific to the Canon VIXIA HV40 camcorder and may not apply to other models.

How can I change the recording mode on the Canon VIXIA HV40 camcorder?

To change the recording mode on the Canon VIXIA HV40 camcorder, follow these steps: 1. Turn on the camcorder by pressing the power button. 2. Press the mode switch to access the recording mode options. The mode switch is located on the side of the camcorder and has icons representing different recording modes. 3. Use the joystick or navigation buttons to highlight the desired recording mode. The available options may include "Auto," "Manual," "Cinema," and "Sports," among others. 4. Press the joystick or navigation buttons to select the highlighted recording mode. 5. Once the recording mode is selected, you can further adjust the settings within that mode, such as exposure, white balance, and audio levels, to suit your preferences. Please note that the specific recording modes and their available settings may vary depending on the model and firmware version of the Canon VIXIA HV40 camcorder. Refer to the user manual for more detailed instructions and information on the different recording modes and their features.

Why are the still images captured by my Canon VIXIA HV40 camcorder blurry?

The still images captured by your Canon VIXIA HV40 camcorder may appear blurry due to the following reasons: 1. Check the focus settings: Ensure that the camcorder is set to the appropriate focus mode. If it is set to manual focus, make sure the subject is in focus by adjusting the focus ring or using the autofocus feature. 2. Verify the stability: Blurriness can occur if the camcorder is not held steady while capturing the image. Hold the camcorder with both hands and try to minimize any movement or shaking. 3. Lighting conditions: Insufficient lighting can result in blurry images. Make sure the subject is well-lit, or use additional lighting sources if necessary. 4. Shutter speed: If the shutter speed is too slow, it can cause motion blur. Adjust the shutter speed to a faster setting to freeze the action and reduce blurriness. 5. Image stabilization: Ensure that the image stabilization feature is enabled. This feature helps to reduce camera shake and can improve the sharpness of the images. Please note that these troubleshooting steps are specific to the Canon VIXIA HV40 camcorder and may not apply to other models.

What should I do if the audio playback is distorted on my Canon VIXIA HV40 camcorder?

If the audio playback is distorted on your Canon VIXIA HV40 camcorder, you can try the following steps to troubleshoot the issue: 1. Check the microphone: Ensure that the microphone is not obstructed or covered. Clean the microphone if necessary to remove any dirt or debris that may affect the audio quality. 2. Adjust the audio levels: Use the audio level controls to adjust the volume of the audio recording. Make sure the levels are not set too high, as this can cause distortion. Experiment with different levels to find the optimal setting. 3. Check the audio input source: If you are using an external microphone or audio input source, ensure that it is properly connected and functioning correctly. Try using a different microphone or input source to see if the distortion persists. 4. Reduce background noise: If there is excessive background noise, it can affect the clarity of the audio. Try recording in a quieter environment or use a directional microphone to focus on the desired sound source. 5. Reset the camcorder: If the distortion continues, try resetting the camcorder to its factory settings. This can help resolve any software or configuration issues that may be causing the problem. Please note that these troubleshooting steps are specific to the Canon VIXIA HV40 camcorder and may not apply to other models.

Is the manual of the Canon VIXIA HV40 available in English?

Yes, the manual of the Canon VIXIA HV40 is available in English .

Is your question not listed? Ask your question here

No results