View the manual for the Canon Speedlite 430 EX II here, for free. This manual comes under the category flash units and has been rated by 10 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Canon Speedlite 430 EX II or do you need help? Ask your question here
The Canon Speedlite 430 EX II is a flash unit designed for use with Canon EOS digital SLR cameras. It provides additional lighting for capturing images in low-light conditions or when the existing lighting is insufficient. With its compact and lightweight design, it is portable and easy to use. Featuring a guide number of 43 (at ISO 100), the Speedlite 430 EX II offers a powerful range of lighting options. It has a flash coverage of up to 24-105mm, which can be expanded to 14mm with the built-in wide panel. The flash head is also adjustable, allowing for bouncing and swiveling to redirect the light as desired. Equipped with E-TTL II (evaluative through-the-lens) autoflash, the Speedlite 430 EX II provides accurate and consistent flash exposures. It also supports high-speed sync, allowing for flash photography with shutter speeds higher than the camera's maximum sync speed. The 430 EX II features a rear control dial and LCD panel, making it easy to access and adjust settings. It has a fast recycle time of approximately 2 seconds, ensuring minimal downtime between shots. The flash unit also supports wireless flash shooting, enabling it to be used as a slave unit in a multi-flash setup. In addition to its impressive functionality, the Speedlite 430 EX II is built with durability in mind. It is constructed with high-quality materials that ensure reliability and longevity over time. Overall, the Canon Speedlite 430 EX II is a versatile and reliable flash unit that enhances the lighting capabilities of compatible Canon cameras, making it a valuable accessory for photographers.
| Brand | Canon |
| Model | Speedlite 430 EX II |
| Product | flash unit |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon Speedlite 430 EX II below.
Press the function button on the flash unit to access the flash control menu, then use the dial to adjust the flash power level.
Press and hold the mode button on the flash unit, then use the dial to select the wireless flash mode.
The recycle time refers to the time it takes for the flash unit to fully recharge after firing a flash. For the Canon Speedlite 430 EX II, the approximate recycle time is around 2.9 seconds with fresh batteries.
Pull out the built-in bounce card located on the front of the flash unit and fold it upwards to bounce the flash off a nearby surface, helping to soften and diffuse the light.
Yes, the flash unit is compatible with external power sources like the Canon CP-E4 N battery pack or compatible third-party options. Simply connect the power source to the flash unit using the designated port.
Yes, the manual of the Canon Speedlite 430 EX II is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0