Canon PowerShot SD400 manual

Canon PowerShot SD400
7.1 · 1
PDF manual
 · 2 pages
English
manualCanon PowerShot SD400
6

Preparing to Download Images to a Computer

Never connect the camera to the computer before thesoftware is installed.List of Things to Prepare• Camera and Computer• Canon Digital Camera Solution Disk provided with thecamera• Interface Cable (use the cable provided with the camera)
A.
Confirm that the computer meets the systemrequirements.See the Camera User Guide.
B.
Install the software.
a.
Place the Canon Digital Camera SolutionDisk into your computer’s CD-ROM drive.• Double-click the [Canon Digital Camera Installer] ( )icons in the CD-ROM window.
b.
Click the Digital Camera Software [Install] buttonand click [Next].
c.
Select [Easy Installation] and click[Next].Proceed with the installation while reviewinginstallation settings.
d.
When the installation is complete,select [Yes, I want to restart mycomputer now.] as shown in the screenbelow, and click [Finish].Once the installation is complete, click[Quit].
e.
Remove the disk from the CD-ROMdrive after restarting.Camera User Guide, Software Starter Guide
C.
Connect the camera to the computer.
a.
Connect the supplied interface cable to thecomputer’s USB port and the camera’s DIGITALterminal.1. Open the terminal cover with the translucent toggleon the wrist strap.2. With the facing in the direction shown, insert theinterface cable until it clicks into place.Treat the connector area with great care while you attachand remove the interface cable.USB portInterface cableTerminal coverb.Slide the mode switch to (Playback) ( ) and press thepower button to turn the camera on (
).
The camera and computer will be ready to communicate witheach other.If the Digital Signature Not Found window appears, click [Yes].The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection.To DIGITALterminalSet the ImageBrowser auto start settings before you connect the camera to the computer for the first time.ImageBrowser Auto Start SettingsOS X (v10.2/v10.3)1. Start Image Capture, click the [Image Capture]menu and select [Preferences].2. In the next menu, click the [When a camera isconnected, open:] list box and select [Other].The window will appear slightly different in v10.2.3. Select [CameraWindow] in the programselection window.CameraWindow is generally installed into the folderopened by selecting the [Applications], [CanonUtilities] and [CameraWindow] folders.4. Click [OK] and then close Image Capture.OS X (v10.1)1. Start Image Capture and select [Other] fromthe [Hot Plug Action] list box.2. Select [CameraWindow] in the programselection window.CameraWindow is generally installed into the folderopened by selecting the [Applications], [CanonUtilities] and [CameraWindow] folders.3. Close Image Capture.
7
Downloading Images to a Computer

Camera User Guide, Software Starter Guide

A.
Select [Canon CameraWindow]and click [OK] (first time only).
B.
Download the images.Download the images using the cameraor the computer.By default, the downloaded images aresaved into the [My Pictures] folder.You can set the type of image todownload and the destinationfolder by clicking [Preferences].The downloaded images will appear as thumbnails(tiny versions) in the Main Window ofZoomBrowser EX. By default, the downloadedimages are saved in separate folders according tothe date on which they were shot.A dialog allowing you to set the default settings will display when you attach the camera and open a connection.The following window will display when the camera and computer are set to the correct mode forcommunicating.Double-click the [Canon CameraWindow] icon on the desktop if the window does not appear.You can set the type of image todownload and the destinationfolder by clicking [Preferences].Image download is complete.
7
Downloading Images to a Computer

Camera User Guide, Software Starter Guide

If the window shown above does not

appear, click the [Start] menu, then

select [Programs] or [All Programs],

followed by [Canon Utilities],

[CameraWindow] and

[CameraWindow].

A.

Download the images.

Download the images using the camera

or the computer.

By default, the downloaded images are

saved into the [Pictures] folder.

The downloaded images will appear as thumbnails

(tiny versions) in the Browser Window of

ImageBrowser. By default, the downloaded images

are saved in separate folders according to the date

on which they were shot.

Thumbnail Thumbnail

Downloading Images Using Camera Operations (Direct Transfer)

a.

Confirm that the button lights blue.

b.
When the Direct Transfer menu appears in the camera’s LCD monitor, use
the
or button to select (All Images) and press the button.

All the images on the camera's memory card will download. To selectively download

images, select

(Select & Transfer).

Downloading Images Using Computer

Operations

a.

Click [Starts to download images].

By default, all the images that have yet to be

downloaded will download.

Getting the Most out of the Software

Software Starter Guide, ZoomBrowser EX / ImageBrowser Software User Guide

What you can do with other software

You can use this software in even more advanced ways by linking it

with other software.

Printing Images with Different Layouts

With PhotoRecord (Windows)/

ImageBrowser (Macintosh), you can

lay out images as desired and then

print them.

What you can do with ZoomBrowser EX (Windows) / ImageBrowser (Macintosh)

Downloading Images to a Computer

You can easily download images saved in the camera to a

computer.

Checking Images

You can magnify images and check the information on them

(the shooting date and time, the shooting settings, etc.)

Sending Images by E-mail

You can start your e-mail program from ZoomBrowser EX

(Windows) / ImageBrowser (Macintosh) and attach images to

e-mail messages that you send.

Editing Movies

You can create and edit movies: link movies and stills that

have been downloaded to your computer, add background

music, superimpose titles and other text, and apply various

effects to the movies.

Using the My Camera Settings

Your favorite images and sounds can be registered as

startup-up images and sounds with My Camera Settings.

Stitching Panoramic Images

With PhotoStitch, you can

connect or “stitch” multiple

images together into a

seamless panoramic view.

A Guide to the Manuals

Basic Methods: Software Starter Guide

Advanced Methods: PDF Manuals

The manuals in PDF format shown below are available

on the Canon website. Please download them from

the following URL:

http://web.canon.jp/Imaging/information-e.html

ZoomBrowser EX Software User Guide (Windows)
ImageBrowser Software User Guide (Macintosh)

Viewing the PDF Manuals

The software application Adobe Reader or Adobe

Acrobat Reader is required to view the PDF manuals.

If one of these applications is not already installed on

your computer, download it from the following website.

http://www.adobe.com/products/acrobat/readstep2.html

View the manual for the Canon PowerShot SD400 here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Canon PowerShot SD400 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon PowerShot SD400 is a camcorder suitable for capturing video footage. It is a compact and lightweight device, making it easy to carry and handle. This camcorder features a 5-megapixel image sensor that delivers high-quality and detailed video recordings. It also has a 2-inch LCD screen that allows for easy viewing and operation. The SD400 has a 3x optical zoom lens, providing flexibility in capturing distant subjects. It also offers various shooting modes, such as portrait and landscape, to suit different recording situations. Additionally, this camcorder has built-in image stabilization technology that helps minimize blurriness caused by camera shake. Equipped with a rechargeable battery, the SD400 offers a decent battery life for uninterrupted recording sessions. It supports SD memory cards, allowing for expanded storage capacity to store your recorded videos. The camcorder also has a USB interface for easy connection to other devices for file transfer. The SD400 comes with basic features and functionality, making it suitable for novice users who are looking to capture videos effortlessly. While it may lack advanced features found in higher-end models, it delivers decent video quality and user-friendly operation. Its compact size and lightweight design make it a convenient choice for those who are always on the go. Overall, the Canon PowerShot SD400 offers a reliable and durable solution for recording videos with its compact size, lightweight design, and user-friendly features.

General
BrandCanon
ModelPowerShot SD400
Productcamcorder
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon PowerShot SD400 below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

How do I switch between different shooting modes on the Canon PowerShot SD400 camcorder?

To switch between different shooting modes on the Canon PowerShot SD400 camcorder, follow these steps: 1. Turn on the camera by pressing the power button. 2. Slide the mode switch to the "Shooting" position. This is usually indicated by a camera icon. 3. Press the FUNC./SET button once to access the shooting mode options. 4. Use the up or down button to navigate through the available shooting modes. 5. Select the desired shooting mode by pressing the FUNC./SET button again. 6. The camera is now set to the selected shooting mode, and you can start capturing photos or videos according to the specific features and settings of that mode. By following these steps, you can easily switch between different shooting modes on the Canon PowerShot SD400 camcorder and explore the various options available for capturing your desired shots.

What should I do if the mode switch on my Canon PowerShot SD400 camcorder is not working?

If the mode switch on your Canon PowerShot SD400 camcorder is not working, you can try the following steps to troubleshoot the issue: 1. Check the battery level: Ensure that the battery is sufficiently charged. If the battery is low, charge it using the provided charger. 2. Power cycle the camera: Turn off the camera, remove the battery, wait for a few seconds, and then reinsert the battery. Turn on the camera again and check if the mode switch is functioning. 3. Clean the mode switch: Sometimes, dust or debris can accumulate around the mode switch, causing it to become unresponsive. Use a soft, lint-free cloth to gently clean the area around the mode switch. 4. Reset the camera settings: Access the camera's menu and look for the option to reset the settings to the default values. Select this option to reset all settings, including the mode switch configuration. 5. Contact customer support: If the mode switch still does not work after trying the above steps, it is recommended to contact Canon customer support for further assistance and possible repair options. By following these troubleshooting steps, you can address the issue with the mode switch on your Canon PowerShot SD400 camcorder.

How do I install the battery pack and SD card into the Canon PowerShot SD400 camcorder?

To install the battery pack and SD card into the Canon PowerShot SD400 camcorder, follow these steps: 1. Make sure the camera is turned off. 2. Locate the battery compartment on the bottom of the camera. 3. Slide the battery compartment cover open using the designated latch or button. 4. Insert the battery pack into the compartment, ensuring that the contacts align properly. 5. Push the battery pack gently until it clicks into place. 6. Close the battery compartment cover securely. 7. Locate the SD card slot, usually located next to the battery compartment. 8. Slide the SD card slot cover open using the designated latch or button. 9. Insert the SD card into the slot, making sure it is oriented correctly. 10. Push the SD card gently until it clicks into place. 11. Close the SD card slot cover securely. 12. You have successfully installed the battery pack and SD card into your Canon PowerShot SD400 camcorder. By following these steps, you can ensure that the battery pack and SD card are properly installed and ready for use in your Canon PowerShot SD400 camcorder.

What should I do if the battery pack is not charging or the SD card is not recognized on my Canon PowerShot SD400 camcorder?

If the battery pack is not charging or the SD card is not recognized on your Canon PowerShot SD400 camcorder, you can try the following steps to troubleshoot the issues: 1. Check the battery: Ensure that the battery pack is properly inserted into the camera and that it is charged. If the battery is low, charge it using the provided charger. 2. Clean the battery contacts: Remove the battery pack from the camera and inspect the metal contacts on both the battery and the camera. If there is any dirt or debris, gently clean the contacts using a soft, lint-free cloth. 3. Check the charging connection: Make sure that the charger is securely plugged into a power outlet and that the charging cable is properly connected to the camera. If necessary, try using a different charging cable or power outlet. 4. Verify the SD card: Remove the SD card from the camera and inspect it for any physical damage or dirt. If necessary, clean the contacts on the SD card using a soft cloth. Then, reinsert the SD card into the camera and ensure it is properly seated. 5. Format the SD card: If the SD card is still not recognized, try formatting it using the camera's formatting function. Note that formatting will erase all data on the card, so make sure to back up any important files before proceeding. If the above steps do not resolve the issues, it is recommended to contact Canon customer support for further assistance and possible repair options.

How do I adjust the zoom and focus when shooting with the Canon PowerShot SD400 camcorder?

To adjust the zoom and focus when shooting with the Canon PowerShot SD400 camcorder, follow these steps: 1. Turn on the camera by pressing the power button. 2. Use the zoom lever located on the top of the camera to adjust the zoom level. Push the lever towards the "T" (telephoto) position to zoom in and towards the "W" (wide-angle) position to zoom out. 3. To achieve precise focus, half-press the shutter button to activate the autofocus system. The camera will automatically focus on the subject in the center of the frame. Once the focus is locked, a green focus confirmation light will appear. 4. If you want to manually adjust the focus, switch the camera to manual focus mode by selecting the MF (manual focus) option in the camera's menu. Use the up and down buttons or the control dial to adjust the focus manually. 5. To capture the photo or start recording a video, fully press the shutter button. The camera will capture the image or start recording with the adjusted zoom and focus settings. By following these steps, you can easily adjust the zoom and focus when shooting with the Canon PowerShot SD400 camcorder to capture your desired shots with precision.

What should I do if the zoom or focus is not working properly on my Canon PowerShot SD400 camcorder?

If the zoom or focus is not working properly on your Canon PowerShot SD400 camcorder, you can try the following steps to troubleshoot the issues: 1. Clean the lens: Use a soft, lint-free cloth to gently clean the lens of the camera. Dust or smudges on the lens can affect the zoom and focus performance. 2. Check the shooting mode: Ensure that you are using the appropriate shooting mode for your desired zoom and focus settings. Some shooting modes may have limitations on zoom or focus adjustments. 3. Reset the camera settings: Access the camera's menu and look for the option to reset the settings to the default values. Select this option to reset all settings, including the zoom and focus configurations. 4. Check the battery level: Make sure that the battery is sufficiently charged. A low battery level can affect the performance of the zoom and focus functions. 5. Contact customer support: If the zoom or focus issues persist after trying the above steps, it is recommended to contact Canon customer support for further assistance and possible repair options. By following these troubleshooting steps, you can address the issues with the zoom or focus not working properly on your Canon PowerShot SD400 camcorder.

How do I view and play back the images captured with the Canon PowerShot SD400 camcorder?

To view and play back the images captured with the Canon PowerShot SD400 camcorder, follow these steps: 1. Turn on the camera by pressing the power button. 2. Use the mode switch to select the playback mode. This is usually indicated by a playback icon. 3. Use the arrow buttons or the control dial to navigate through the captured images on the camera's LCD screen. 4. To view an image in full screen, press the "Display" or "Zoom" button. You can use the arrow buttons to scroll through the image if it is larger than the screen. 5. To zoom in on an image, use the zoom lever or the zoom buttons. This allows you to examine the details of the image more closely. 6. To play back a video, select the video file and press the "Play" button. The video will be displayed on the LCD screen, and you can use the arrow buttons to control the playback (e.g., play, pause, fast forward, rewind). 7. To delete an image or video, press the "Delete" button while viewing the file. Follow the on-screen prompts to confirm the deletion. By following these steps, you can easily view and play back the images and videos captured with your Canon PowerShot SD400 camcorder, allowing you to review and enjoy your captured moments.

What should I do if I cannot view or play back the images on my Canon PowerShot SD400 camcorder?

If you cannot view or play back the images on your Canon PowerShot SD400 camcorder, you can try the following steps to troubleshoot the issue: 1. Check the battery level: Ensure that the battery is sufficiently charged. If the battery is low, charge it using the provided charger. 2. Clean the memory card contacts: Remove the memory card from the camera and inspect the metal contacts on both the card and the camera. If there is any dirt or debris, gently clean the contacts using a soft, lint-free cloth. 3. Check the memory card compatibility: Ensure that the memory card you are using is compatible with the Canon PowerShot SD400 camcorder. Refer to the camera's manual or specifications to verify the supported memory card types and capacities. 4. Format the memory card: If the memory card is not recognized, try formatting it using the camera's formatting function. Note that formatting will erase all data on the card, so make sure to back up any important files before proceeding. 5. Test with a different memory card: If possible, try using a different memory card to see if the issue persists. This will help determine if the problem is with the camera or the specific memory card. 6. Contact customer support: If the issue continues after trying the above steps, it is recommended to contact Canon customer support for further assistance and possible repair options. By following these troubleshooting steps, you can address the issue of not being able to view or play back images on your Canon PowerShot SD400 camcorder.

How do I delete unwanted images from the Canon PowerShot SD400 camcorder?

To delete unwanted images from the Canon PowerShot SD400 camcorder, follow these steps: 1. Turn on the camera by pressing the power button. 2. Switch the camera to playback mode using the mode switch. This is usually indicated by a playback icon. 3. Use the arrow buttons or the control dial to navigate through the images on the camera's LCD screen. 4. When you come across an image you want to delete, press the "Delete" button. 5. A confirmation message will appear on the screen asking if you want to delete the image. Select "Yes" or press the "Delete" button again to confirm the deletion. 6. Repeat steps 3 to 5 for each unwanted image you want to delete. 7. To delete all images at once, access the camera's menu and look for the option to delete all images. Select this option and confirm the deletion when prompted. 8. Once the images are deleted, they cannot be recovered, so make sure to double-check before confirming the deletion. By following these steps, you can easily delete unwanted images from your Canon PowerShot SD400 camcorder, freeing up space and organizing your photo collection.

What should I do if I am unable to delete images or the delete function is not working on my Canon PowerShot SD400 camcorder?

If you are unable to delete images or the delete function is not working on your Canon PowerShot SD400 camcorder, you can try the following steps to troubleshoot the issue: 1. Check the memory card: Ensure that the memory card is not write-protected. Some memory cards have a physical switch that can be toggled to enable or disable write protection. Make sure the switch is in the correct position. 2. Format the memory card: If the delete function is not working, try formatting the memory card using the camera's formatting function. Note that formatting will erase all data on the card, so make sure to back up any important files before proceeding. 3. Check the file permissions: If you are unable to delete specific images, check the file permissions on the memory card. Ensure that the images are not set to read-only or protected. 4. Reset the camera settings: Access the camera's menu and look for the option to reset the settings to the default values. Select this option to reset all settings, including the delete function configuration. 5. Test with a different memory card: If possible, try using a different memory card to see if the issue persists. This will help determine if the problem is with the camera or the specific memory card. 6. Contact customer support: If the issue continues after trying the above steps, it is recommended to contact Canon customer support for further assistance and possible repair options. By following these troubleshooting steps, you can address the issue of being unable to delete images or the delete function not working on your Canon PowerShot SD400 camcorder.

Is the manual of the Canon PowerShot SD400 available in English?

Yes, the manual of the Canon PowerShot SD400 is available in English .

Is your question not listed? Ask your question here

No results