Canon PowerShot SD1300 IS manual

Canon PowerShot SD1300 IS
8.6 · 2
PDF manual
 · 148 pages
English
manualCanon PowerShot SD1300 IS
70

Changing the ISO Speed

Choose the ISO speed.

After pressing the
m
button, press the
op buttons to choose .

Choose an option.

Press the qr buttons to choose an
option, then press the m button.
X The setting you chose will appear on the
screen.
Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.
Low
High
Fine weather conditions, outdoor shooting.
Cloudy, Twilight
Nightscapes, Dark interiors
Changing the ISO speed
Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
Raising the ISO speed results in a faster shutter speed, reducing camera
shake and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
When the camera is set to , you can press the shutter button
halfway to display the automatically set ISO speed.
In (p. 55), ISO speeds will automatically be set higher than in A
mode, depending on the scene.
COPY

View the manual for the Canon PowerShot SD1300 IS here, for free. This manual comes under the category camcorders and has been rated by 2 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Canon PowerShot SD1300 IS or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
M
Mary MillerJune 30, 2024

how do i charge the battery in a powershot sd1300

The Canon PowerShot SD1300 IS is a digital camera with a resolution of approximately 12.1 megapixels, allowing for high-quality images. It has a maximum image resolution of 4000 x 3000 pixels, ensuring sharp and detailed pictures. The camera features a 4x digital zoom, enabling users to bring distant subjects closer. Additionally, it has a 4x optical zoom, providing further zoom capabilities while maintaining image quality. While not a digital SLR camera, the Canon PowerShot SD1300 IS offers a combined zoom of 16x, allowing users to capture subjects from various distances. The camera utilizes a CCD sensor, measuring 1/2.3 inches in size, to capture light and produce clear images. It also includes a built-in flash, ensuring proper lighting in dimly lit environments. The Canon PowerShot SD1300 IS is designed to produce reliable and accurate photographs. The camera's construction incorporates high-quality materials, ensuring durability over time. Its compact size and portability make it suitable for everyday use and on-the-go photography. In conclusion, the Canon PowerShot SD1300 IS is a compact digital camera with a 12.1-megapixel resolution, 4x digital and optical zoom, and a 16x combined zoom. It utilizes a CCD sensor and includes a built-in flash. With its reliable construction, it offers a durable solution for capturing high-quality images.

General
BrandCanon
ModelPowerShot SD1300 IS | 4218B001
Productcamcorder
EAN0013803119534, 0013803119541, 0013803119558, 0013803119565, 0013803119572, 0845251022117
LanguageEnglish
FiletypeUser manual (PDF)
Picture quality
Megapixel12.1 MP
Maximum image resolution4000 x 3000 pixels
Sensor typeCCD
Image sensor size1/2.3 "
Camera typeCompact camera
Lens system
Digital zoom4 x
Optical zoom4 x
Focal length range5 - 20 mm
Combined zoom16 x
Other features
Digital SLRNo
Focal length (35mm film equivalent)28 - 112 mm
Camera shutter speed15 - 1/1500, 0.9 s
Built-in flashYes
Video capabilityYes
InterfaceUSB
Focusing
Macro focusing range (wide)0.03 - 0.5 m
Normal focusing range0.03 - ∞ m
Focus adjustmentAuto
Normal focusing range (wide)0.03 - ∞ m
Normal focusing range (tele)0.5 - ∞ m
Flash
Flash range (wide)0.3 - 4 m
Flash range (tele)0.5 - 2 m
Flash exposure lockYes
Flash recharging time10 s
Flash modesauto, Flash off, manual, Red-eye reduction, Slow synchronization
Video
Maximum video resolution640 x 480 pixels
Video formats supportedAVI
Motion JPEG frame rate30 fps
Video recordingYes
Display
DisplayLCD
Display diagonal2.7 "
Display resolution (numeric)230000 pixels
Field of view100 %
Ports & interfaces
PictBridgeYes
USB version2.0
Camera
Self-timer delay2 s
Custom colorYes
Photo effectsblack&white, Neutral, Sepia
Scene modesbeach, Children, Close-up (macro), Fireworks, Night, Night landscape, Night portrait, party (indoor), Portrait, self-portrait, Underwater
White balanceauto, Cloudy, custom modes, daylight, Fluorescent, Tungsten
Image editingresizing, rotating
Camera playbackmovie, single image, slide show
Design
Product colorBlue
Battery
Battery typeNB-6L
Battery technologyLithium-Ion (Li-Ion)
Battery life (CIPA standard)240 shots
Weight & dimensions
Weight140 g
Width90.5 mm
Depth55.8 mm
Height21.2 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Memory
Compatible memory cardsmmc, sd, sdhc, sdxc
Exposure
Light exposure modesAuto
Light meteringCentre-weighted, Spot
Shutter
Camera shutter typeelectronic, mechanical
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon PowerShot SD1300 IS below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the weight of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has a weight of 140 g.

What is the screen size of the Canon PowerShot SD1300 IS?

The screen size of the Canon PowerShot SD1300 IS is 2.7 ".

What is the height of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has a height of 21.2 mm.

What is the width of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has a width of 90.5 mm.

What is the depth of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has a depth of 55.8 mm.

Is the Canon PowerShot SD1300 IS a digital SLR camera?

No, the Canon PowerShot SD1300 IS is not a digital SLR camera. This means that it does not offer the advanced features and interchangeable lenses typically found in digital SLRs. However, it is a compact and user-friendly point-and-shoot camera.

What is the maximum image resolution of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has a maximum image resolution of 4000 x 3000 pixels. This allows for high-quality, detailed photos that can be printed in large sizes or cropped without significant loss of quality.

Does the Canon PowerShot SD1300 IS have a built-in flash?

Yes, the Canon PowerShot SD1300 IS has a built-in flash. This means that the camera can illuminate subjects in low-light conditions or add fill light to reduce shadows.

What is the maximum video resolution of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has a maximum video resolution of 640 x 480 pixels. While this may not offer the same level of clarity as HD video, it still allows for decent quality videos suitable for casual recording and sharing.

What is the zoom capability of the Canon PowerShot SD1300 IS?

The Canon PowerShot SD1300 IS has both digital zoom and optical zoom capabilities. It offers 4x optical zoom, which is a true zoom that provides sharper and higher-quality images compared to digital zoom. With a combined zoom of 16x, users can get closer to distant subjects without sacrificing image quality.

How can I check the number of recording pixels for still images and movies on the Canon PowerShot SD1300 IS camcorder?

To check the number of recording pixels for still images and movies on the Canon PowerShot SD1300 IS camcorder, follow these steps: 1. Press the "m" button on the camera. 2. Use the "op" buttons to navigate and select the "Image Size" option. 3. Press the "m" button to confirm your selection. 4. The available recording pixel settings will be displayed on the screen. 5. Use the "qr" buttons to choose the desired recording pixel setting. 6. Press the "m" button to confirm your selection. 7. The chosen recording pixel setting will be shown on the screen. For still images, the Canon PowerShot SD1300 IS camcorder offers the following recording pixel options: - Large: 4000 x 3000 pixels - Medium 1: 3264 x 2448 pixels - Medium 2: 2592 x 1944 pixels - Medium 3: 1600 x 1200 pixels - Small: 640 x 480 pixels - Widescreen: 4000 x 2248 pixels For movies, the available recording pixel options are: - 640 x 480 pixels at 30 frames/sec - 320 x 240 pixels at 30 frames/sec Please note that the actual frame rate for movies is 29.97 frames/sec. These steps will allow you to check and select the appropriate recording pixel settings for your still images and movies on the Canon PowerShot SD1300 IS camcorder.

What should I do if the playback function is not working on the Canon PowerShot SD1300 IS camcorder?

If the playback function is not working on the Canon PowerShot SD1300 IS camcorder, you can try the following steps: 1. Make sure you are in Playback mode by pressing the "1" button on the camera. 2. Check if the issue is related to the specific image or video file you are trying to play back. Some files that have been edited on a computer, had their file name changed, or were taken on a different camera may not be compatible with the playback function. 3. Ensure that there is sufficient free space available on the memory card. If the memory card is full, the edit function may not work properly. 4. If the playback function settings need adjustment, press the "1" button to enter the 1 tab. 5. Use the "qr" buttons to navigate and choose the desired option for the image that first displays in playback, such as "Last seen" or "Last shot." 6. Press the "1" button to confirm your selection. By following these steps, you can troubleshoot and resolve issues with the playback function on the Canon PowerShot SD1300 IS camcorder.

How can I edit still images on the Canon PowerShot SD1300 IS camcorder?

To edit still images on the Canon PowerShot SD1300 IS camcorder, follow these steps: 1. Press the "1" button to enter Playback mode on the camera. 2. Use the "qr" buttons to navigate and select the desired image you want to edit. 3. Press the "m" button to enter the editing options. 4. Choose the editing function you want to use, such as correcting the red-eye effect. 5. For red-eye correction, select the "Red-Eye Correction" option. 6. Press the "m" button to confirm your selection. 7. The camera will automatically detect and correct red eyes in the image. 8. A frame will appear around the corrected portion of the image. 9. If desired, you can magnify or reduce the size of the image using the procedures described in the manual. 10. To save the edited image as a new file, press the "opqr" buttons to choose the "New File" option. 11. Press the "m" button to save the image as a new file. 12. Follow the instructions provided in Step 5 on page 103 of the manual to complete the saving process. Please note that some images may not be properly corrected, and protected images cannot be overwritten during the editing process.

What should I do if the battery pack is not charging on the Canon PowerShot SD1300 IS camcorder?

If the battery pack is not charging on the Canon PowerShot SD1300 IS camcorder, you can try the following steps: 1. Ensure that you are using the included charger to charge the battery. The battery is not charged at the time of purchase. 2. Remove the cover and insert the battery into the charger. Align the S marks on the battery and charger, then slide the battery in and down. 3. Plug the charger into a power outlet. The charge lamp will light red, indicating that charging has started. 4. Wait for approximately 1 hour and 55 minutes for the battery to fully charge. The charge lamp will turn green when charging is complete. 5. Unplug the charger from the power outlet and remove the battery by sliding it in and up. 6. If the battery still does not charge, ensure that the charger is properly connected to the power outlet and that the outlet is functioning. 7. If the issue persists, try using a different power outlet or charger, if available. 8. If none of the above steps resolve the issue, consider contacting Canon customer support for further assistance. By following these steps, you can troubleshoot and resolve issues with the battery pack not charging on the Canon PowerShot SD1300 IS camcorder.

How can I connect the Canon PowerShot SD1300 IS camcorder to a computer or other devices?

To connect the Canon PowerShot SD1300 IS camcorder to a computer or other devices, follow these steps: 1. Turn off the camera and open the cover. 2. Insert the smaller plug of the cable firmly into the camera terminal in the direction shown. 3. Insert the larger plug of the cable into the corresponding port on your computer or other device. For specific connection details, refer to the user guide provided with your computer. 4. Turn on the camera by pressing the power button. 5. On a Windows computer, click on "Downloads Images From Canon Camera using Canon CameraWindow" to open CameraWindow. If CameraWindow does not appear, click the Start menu, go to All Programs, then Canon Utilities, and select CameraWindow. 6. On a Macintosh computer, CameraWindow will appear automatically when the camera is connected. If CameraWindow does not appear, click on the CameraWindow icon on the Dock (the bar at the bottom of the desktop). 7. You can now transfer and view images from the camera on your computer or other device. Please note that these steps are based on the Canon PowerShot SD1300 IS camcorder manual and may vary slightly depending on your specific computer or device.

How can I check the number of recording pixels for still images and movies on the Canon PowerShot SD1300 IS camcorder?

To check the number of recording pixels for still images and movies on the Canon PowerShot SD1300 IS camcorder, follow these steps: 1. Press the "m" button on the camera. 2. Use the "op" buttons to navigate and select the "Image Size" option. 3. Press the "m" button to confirm your selection. 4. The available recording pixel settings will be displayed on the screen. 5. Use the "qr" buttons to choose the desired recording pixel setting. 6. Press the "m" button to confirm your selection. 7. The chosen recording pixel setting will be shown on the screen. For still images, the Canon PowerShot SD1300 IS offers the following recording pixel options: - Large: 4000 x 3000 pixels - Medium 1: 3264 x 2448 pixels - Medium 2: 2592 x 1944 pixels - Medium 3: 1600 x 1200 pixels - Small: 640 x 480 pixels - Widescreen: 4000 x 2248 pixels For movies, the available recording pixel options are: - 640 x 480 pixels at 30 frames/sec - 320 x 240 pixels at 30 frames/sec Please note that the actual frame rate for movies is 29.97 frames/sec. These steps will allow you to check and select the appropriate recording pixel settings for your still images and movies on the Canon PowerShot SD1300 IS camcorder.

What should I do if the playback function is not working on the Canon PowerShot SD1300 IS camcorder?

If the playback function is not working on the Canon PowerShot SD1300 IS camcorder, you can try the following steps: 1. Ensure that you are in Playback mode by pressing the "1" button on the camera. 2. Check if the issue is related to the specific image or video file you are trying to play back. Some files that have been edited on a computer, had their file name changed, or taken on a different camera may not be compatible with the playback function. 3. Make sure that there is sufficient free space available on the memory card. If the memory card is full, the edit function and playback may not work properly. 4. If the issue persists, you can try adjusting the playback function settings. Press the "1" button to enter the 1 tab, and use the "qr" buttons to navigate and choose the desired option, such as "Resume" or "Last shot" for the image that first displays in playback. By following these steps, you can troubleshoot and resolve issues with the playback function on the Canon PowerShot SD1300 IS camcorder.

How can I edit still images on the Canon PowerShot SD1300 IS camcorder?

To edit still images on the Canon PowerShot SD1300 IS camcorder, follow these steps: 1. Press the "1" button on the camera to enter Playback mode. 2. Use the "qr" buttons to navigate and select the desired image you want to edit. 3. Press the "m" button to enter the editing options. 4. Choose the editing function you want to use, such as correcting the red-eye effect. 5. For red-eye correction, select the "Red-Eye Correction" option. 6. Press the "m" button to confirm your selection. 7. The camera will automatically detect and correct red eyes in the image. 8. A frame will appear around the corrected portion of the image. 9. You can also magnify or reduce the size of the image using the procedures described in the manual. 10. To save the edited image as a new file, press the "opqr" buttons to choose the "New File" option. 11. Press the "m" button to save the image as a new file. 12. Follow the instructions provided in the manual to complete the saving process. Please note that some images may not be properly corrected, and protected images cannot be overwritten during the editing process.

What should I do if the battery pack is not charging on the Canon PowerShot SD1300 IS camcorder?

If the battery pack is not charging on the Canon PowerShot SD1300 IS camcorder, you can try the following steps: 1. Ensure that you are using the included charger to charge the battery. The battery is not charged at the time of purchase. 2. Remove the battery cover and insert the battery into the charger. Align the S marks on the battery and charger, then slide the battery in and down. 3. Plug the charger into a power outlet. The charge lamp will light red, indicating that charging has started. 4. Charging takes approximately 1 hour and 55 minutes. The charge lamp will turn green when charging is complete. 5. Unplug the charger from the power outlet and remove the battery by sliding it in and up. 6. If the battery pack still does not charge, check the battery specifications. The Battery Pack NB-6L is a rechargeable lithium-ion battery with a voltage of 3.7 V DC and a capacity of 1000 mAh. 7. If the issue persists, it is recommended to contact Canon customer support for further assistance. By following these steps, you can troubleshoot and resolve issues with the battery pack not charging on the Canon PowerShot SD1300 IS camcorder.

How can I connect the Canon PowerShot SD1300 IS camcorder to a computer for data transfer?

To connect the Canon PowerShot SD1300 IS camcorder to a computer for data transfer, follow these steps: 1. Turn off the camera and open the cover. 2. Insert the smaller plug of the cable firmly into the camera terminal in the direction shown. 3. Insert the larger plug of the cable into the computer. Refer to the user guide provided with the computer for specific connection details. 4. Turn on the camera by pressing the "1" button. 5. On a Windows computer, click on "Downloads Images From Canon Camera using Canon CameraWindow" to open CameraWindow. If CameraWindow does not appear, go to the Start menu, select "All Programs," followed by "Canon Utilities," "CameraWindow," and "CameraWindow." 6. On a Macintosh computer, CameraWindow will appear when the camera is connected. If CameraWindow does not appear, click on the CameraWindow icon on the Dock (the bar at the bottom of the desktop). By following these steps, you can connect the Canon PowerShot SD1300 IS camcorder to a computer for data transfer.

Is the manual of the Canon PowerShot SD1300 IS available in English?

Yes, the manual of the Canon PowerShot SD1300 IS is available in English .

Is your question not listed? Ask your question here

No results