Canon Pixma MX452 manual

Canon Pixma MX452
9.5 · 1
PDF manual
 · 4 pages
English
manualCanon Pixma MX452
1
XXXXXXXX © CANON INC. 2013
1
2
1
3
5
6
3
4
2
7
1
2
2
1
seriesseries
Retire la cinta.
Compruebe que se le han suministrado los siguientes elementos.
Preparativos
Elementos
suministrados
Abra la cubierta delantera, la
bandeja de salida del papel y la
cubierta de documentos.
11
No conecte aún el cable USB.
Conecte el cable de alimentación.
55
Pulse el botón ACTIVADO (ON).
66
Retire la cinta naranja y el material de protección.
33
Cierre la tapa de salida del papel y
la cubierta de documentos.
44
Abra la tapa de salida del papel.
22
Seleccione su idioma y, a
continuación, pulse el botón OK.
77
Para cambiar el ajuste de idioma, pulse
el botón Atrás (Back).
Botón Atrás (Back)
¡Léame en primer lugar!Consérvelo a mano para utilizarlo como referencia en el futuro.
Para llevar a cabo la instalación, coloque el equipo cerca del punto de acceso* y del
ordenador.
(* necesario para LAN inalámbrica)

Guía de inicio

ESPAÑOLCanon Inkjet Equipo multifunción para ocina
Ayuda de Canon
Asistencia técnica por correo electrónico:
www.usa.canon.com/support
Asistencia técnica gratuita: 1-800-OK-CANON
Esta opción proporciona asistencia telefónica técnica personal, sin
cargo por servicio, de lunes a viernes (excepto festivos), durante
el periodo de garantía.
Se dispone de un dispositivo telefónico auxiliar para sordos (TDD)
en 1-866-251-3752.
Remove the tape.
Check the included items.
Preparation
Included Items
Open the Front Cover, the Paper
Output Tray, and the Document
Cover.
11
Do not connect the USB cable yet.
Connect the power cord.
55
Press the ON button.
66
Remove the orange tape and protective material.
33
Close the Paper Output Cover and
the Document Cover.
44
Open the Paper Output Cover.
22
Select your language, then press
the OK button.
77
To change the language setting, press
the Back button.
Back button

Getting Started

Read me rst!Keep me handy for future reference.
To perform setup, place the machine near the access point* and computer.
(* Required for wireless LAN)
ENGLISHCanon Inkjet Ofce All-In-One
Getting Help from Canon
Email Tech Support — www.usa.canon.com/support
Toll-Free Tech Support— 1-800-OK-CANON
This option provides live telephone technical support, free of
service charges, Monday-Friday (excluding holidays), during the
warranty period.
Telephone Device for the Deaf (TDD) support is available at
1-866-251-3752.
QT5-6107-V01
PRINTED IN XXXXXXXX

View the manual for the Canon Pixma MX452 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Canon Pixma MX452 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 11
C
Craig Branco September 19, 2023

What is Support Code 5B02 for Cannon Mx452. Pixma

The Canon Pixma MX452 is a printer that is designed for home and small office use. It is a multifunction printer that can print, copy, scan, and fax documents. The printer is compact and lightweight, making it easy to fit into small spaces. The MX452 uses a four-color ink system to produce high-quality prints with a maximum resolution of 4800 x 1200 dpi. It has a print speed of approximately 9.7 images per minute for black and white documents and 5.5 images per minute for color documents. The printer supports wireless connectivity, allowing users to print from their smartphones, tablets, and other mobile devices. It also has a built-in Ethernet port for direct network connection. The MX452 is compatible with various operating systems, including Windows and Mac. In terms of paper handling, the printer has a rear tray that can hold up to 100 sheets of plain paper. It also has an automatic document feeder that can accommodate up to 30 sheets of paper for scanning or copying multiple pages at once. The MX452 uses individual ink tanks, which means users only need to replace the color that has run out, reducing ink wastage. The printer also supports optional XL ink cartridges for users who print frequently and want to save on costs. Overall, the Canon Pixma MX452 is a reliable and efficient printer that offers a range of features for home and small office use.

General
BrandCanon
ModelPixma MX452
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon Pixma MX452 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

How do I troubleshoot if the Canon Pixma MX452 printer is not installing properly during the setup process?

To troubleshoot if the Canon Pixma MX452 printer is not installing properly during the setup process, follow these steps: 1. Check the included items: Open the front cover, paper output tray, and document cover to ensure all necessary components are present. 2. Connect the power cord: Plug in the power cord to provide power to the printer. 3. Press the ON button: Turn on the printer by pressing the ON button. 4. Remove protective materials: Remove any orange tape and protective materials from the printer. 5. Install ink cartridges: Open the paper output cover and lower the ink cartridge lock lever. Insert the color and black ink cartridges into their respective slots until they stop. Lift the ink cartridge lock lever to secure them in place. 6. Close the paper output cover: Ensure the paper output cover is closed properly. 7. Select language: Use the control panel to select your preferred language and press the OK button. 8. Wait for setup completion: Wait for approximately 1 to 2 minutes until the setup process is complete. By following these steps, you can troubleshoot installation issues with the Canon Pixma MX452 printer during the setup process.

What should I do if the Canon Pixma MX452 printer is not picking up or feeding the paper correctly?

To troubleshoot if the Canon Pixma MX452 printer is not picking up or feeding the paper correctly, follow these steps: 1. Check the paper: Ensure that the paper being used is compatible with the printer and is not damaged or wrinkled. 2. Adjust the paper guides: Open the paper output tray and adjust the paper guides to fit the width of the paper. Make sure the guides are snug against the edges of the paper. 3. Clean the paper feed rollers: Turn off the printer and unplug the power cord. Open the printer cover and locate the paper feed rollers. Use a lint-free cloth lightly moistened with water to clean the rollers. Rotate the rollers manually to clean them thoroughly. 4. Fan the paper: Remove the paper from the tray and fan the stack to separate the sheets. This helps prevent multiple sheets from feeding at once. 5. Reload the paper: Place the paper back into the paper tray, making sure it is aligned properly and not exceeding the maximum paper capacity. 6. Adjust the paper settings: On your computer, open the printer settings and ensure that the paper size and type settings match the paper loaded in the tray. 7. Test print: Print a test page to check if the paper is feeding correctly. If the issue persists, repeat the steps or consult the printer manual for further troubleshooting options. By following these steps, you can troubleshoot paper feeding issues with the Canon Pixma MX452 printer.

How can I resolve issues with the ink cartridges not being recognized or producing poor print quality on the Canon Pixma MX452 printer?

To resolve issues with the ink cartridges not being recognized or producing poor print quality on the Canon Pixma MX452 printer, follow these steps: 1. Check the ink cartridges: Ensure that the ink cartridges are properly installed in their respective slots. Make sure they are securely inserted and the lock lever is in the correct position. 2. Remove and reinsert the cartridges: Turn off the printer and open the front cover. Lift the ink cartridge lock lever and remove the cartridges. Check for any protective tape or packaging and remove them if present. Reinsert the cartridges firmly and lower the lock lever to secure them. 3. Clean the contacts: If the cartridges are still not recognized, turn off the printer and unplug the power cord. Open the front cover and carefully remove the cartridges. Use a lint-free cloth lightly moistened with water to clean the electrical contacts on both the cartridges and the printer. Allow them to dry completely before reinserting the cartridges. 4. Perform a print head alignment: Use the printer's control panel to perform a print head alignment. This will ensure that the ink is properly distributed and improve print quality. 5. Replace the ink cartridges: If the above steps do not resolve the issue, consider replacing the ink cartridges with new ones. Make sure to use genuine Canon ink cartridges for optimal performance. By following these steps, you can troubleshoot issues with ink cartridges not being recognized or producing poor print quality on the Canon Pixma MX452 printer.

What steps should I take if the Canon Pixma MX452 printer is experiencing frequent paper jams?

To resolve frequent paper jams on the Canon Pixma MX452 printer, follow these steps: 1. Remove any jammed paper: Turn off the printer and unplug the power cord. Open the paper output cover and carefully remove any jammed paper. Make sure to remove all torn pieces of paper to prevent future jams. 2. Check the paper type and condition: Ensure that you are using the correct type and size of paper recommended for the printer. Also, check if the paper is clean, dry, and not wrinkled or damaged. 3. Adjust the paper guides: Open the paper output tray and adjust the paper guides to fit the width of the paper. Make sure the guides are snug against the edges of the paper. 4. Fan the paper: Before loading the paper, fan the stack to separate the sheets. This helps prevent multiple sheets from feeding at once. 5. Reload the paper: Place the paper back into the paper tray, aligning it properly and not exceeding the maximum paper capacity. 6. Check the paper path: Inspect the paper path for any obstructions or foreign objects. If any are found, carefully remove them. 7. Clean the paper feed rollers: Turn off the printer and unplug the power cord. Open the printer cover and locate the paper feed rollers. Use a lint-free cloth lightly moistened with water to clean the rollers. Rotate the rollers manually to clean them thoroughly. 8. Test print: Print a test page to check if the paper jams have been resolved. If the issue persists, repeat the steps or consult the printer manual for further troubleshooting options. By following these steps, you can resolve frequent paper jams on the Canon Pixma MX452 printer.

Where can I find assistance if I encounter any technical issues or need support with the Canon Pixma MX452 printer?

If you encounter any technical issues or need support with the Canon Pixma MX452 printer, you can find assistance through the following steps: 1. Contact Canon Support: Visit the official Canon website and navigate to the support section. Look for the support options specific to the Canon Pixma MX452 printer. 2. Online Support: Canon provides online support resources such as FAQs, troubleshooting guides, and user manuals. Search for the Canon Pixma MX452 printer support page to access these resources. 3. Email Support: If you need further assistance, you can reach out to Canon's email support. Look for the contact information on the Canon website and send an email describing your issue. 4. Phone Support: Canon offers phone support for technical issues. Find the appropriate phone number for your region and call the Canon support team for personalized assistance. 5. Service Centers: If your printer requires physical repairs or servicing, Canon has authorized service centers where you can take your Canon Pixma MX452 printer for professional assistance. By following these steps, you can find the necessary assistance and support for any technical issues you encounter with the Canon Pixma MX452 printer.

Is the manual of the Canon Pixma MX452 available in English?

Yes, the manual of the Canon Pixma MX452 is available in English .

Is your question not listed? Ask your question here

No results