Canon PC D320 manual

Canon PC D320
6.9 · 1
PDF manual
 · 86 pages
English
manualCanon PC D320
i
Your machine includes the following documentation. This documentation has been designed so that you can
easily use your machine to suit your particular needs.
Setting up the machine......................................
Installing Printer Driver .....................................
Document and paper handling .............................
Making copies ................................................
Printing.........................................................
Maintenance ..................................................
Troubleshooting feed and copy issues ....................
Installing Printer Driver .....................................
Printer Properties ............................................
Troubleshooting Printer Driver issues ....................
Documentation is included on the CD-ROM in PDF form.
The machine shown in this guide is the imageCLASS D340 model.

Copyright

Copyright ©2003 by Canon, Inc. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written
permission of Canon, Inc.

Trademarks

Canon is a registered trademark and UHQ™ is a trademark of Canon, Inc.
As an ENERGY STAR
®
Partner, Canon U.S.A., Inc. has determined that this product
meets the ENERGY STAR
®
guidelines for energy efficiency.
NOTE

Using Your Documentation

Set-Up Sheet

Basic Guide

Printer Guide

View the manual for the Canon PC D320 here, for free. This manual comes under the category copiers and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Canon PC D320 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
T
Trokon GarmondyuAugust 15, 2023

How to use the canon D320 printer

How to use the canon D320 printer
zoom-in
View photo

General
BrandCanon
ModelPC D320
Productcopier
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon PC D320 below.

How can I troubleshoot if the Canon PC D320 copier is not printing properly?

To troubleshoot if the Canon PC D320 copier is not printing properly, you can follow these steps: 1. Check if the machine's memory is full. If it is, print or delete any documents stored in memory to free up space. (Refer to page 4-12 in the manual for more details.) 2. If the documents have black streaks or appear dirty after feeding them in the Automatic Document Feeder (ADF), clean the read area of the platen glass. (Refer to page 7-2 in the manual for instructions.) 3. Ensure that the size, thickness, and type of paper you are using are within the specifications of the machine. Check the paper specifications on page 2-1 of the manual. 4. Make sure the cartridge is installed properly. Refer to the set-up sheet for installation instructions. 5. Check the toner level in the cartridge. If it is low, refer to "When to Replace the Cartridge" on page 7-3 and replace it if necessary. 6. Adjust the copy exposure correctly using the Exposure key on the control panel. You can also adjust the copy exposure in the PRINT EXPOSURE settings of the COMMON SETTINGS in the Additional Functions menu. (Refer to pages 4-6 and 9-2 in the manual for more information.) If the above steps do not resolve the printing issue, refer to the manual's troubleshooting section on print quality problems for further assistance.

What should I do if the Canon PC D320 copier is producing smudged copies?

To troubleshoot if the Canon PC D320 copier is producing smudged copies, you can follow these steps: 1. Check if there is any glue, ink, or correction fluid on the document you are copying. Make sure it is completely dry before placing it on the platen glass or loading it into the Automatic Document Feeder (ADF). 2. Remove any fasteners such as staples or paper clips from the document before loading it into the ADF. 3. Ensure that the document you are copying is within the scanning area of the copier. The manual provides a diagram showing the maximum dimensions for different types of paper. 4. Clean the read area of the platen glass, especially if you are using the ADF to feed documents. Black lines may appear in copies if there is glue, ink, correction fluid, or other foreign matter in the read area. Use a clean, soft cloth to wipe the area clean. If needed, you can moisten the cloth with water or a mild neutral detergent. By following these steps, you can troubleshoot and resolve the issue of smudged copies with the Canon PC D320 copier.

How can I fix paper jams in the Canon PC D320 copier?

To fix paper jams in the Canon PC D320 copier, you can follow these steps: 1. Hold both sides of the jammed paper and carefully move it inward, then gently pull it out. Avoid pulling the jammed paper upward to prevent toner stains and print quality reduction. 2. If the leading edge of the paper is visible but has not entered the imaging area, pull the paper forwards and roll it inwards. Again, avoid pulling the jammed paper upward. 3. Open the left cover and push down the green paper release levers on the right and left sides. 4. Gently pull the jammed paper between the output rollers until the leading edge emerges from the machine. 5. Carefully pull the jammed paper through the rollers and out of the machine. 6. If the jammed paper is badly folded, similar to the folds of an accordion, ease the jammed paper loose and then pull it out of the printer. 7. Place the paper release levers back to their original position and close the left cover. 8. Return the cartridge back into the machine, then close the right cover. 9. For jams in the multi-purpose tray, remove the tray, hold both sides of the jammed paper, and pull it straight up and out from the machine. Then, set the multi-purpose tray back on top of the cassette. By following these steps, you can resolve paper jams in the Canon PC D320 copier.

What should I do if the Canon PC D320 copier is not feeding paper correctly from the cassette?

To fix the issue of the Canon PC D320 copier not feeding paper correctly from the cassette, you can follow these steps: 1. Check if the cassette or multi-purpose tray contains too many sheets of paper. Make sure the paper stack does not exceed the capacity of the cassette or tray. 2. Ensure that the paper is loaded properly in the cassette or multi-purpose tray. Adjust the slide guides to fit the paper size and make sure the paper stack is aligned correctly. 3. If the paper feeds skewed or multiple sheets feed into the machine at the same time, check if the paper is loaded correctly in the cassette. Adjust the slide guides and ensure the paper exit path is clear. 4. If the paper feeds curled, make sure that you are using acceptable paper that meets the specifications of the machine. Select the appropriate paper type in the Additional Functions menu. 5. If repeated paper jams occur, fan the paper stack before loading it to prevent sticking. Check the size, thickness, and type of paper being used, and ensure it is within the machine's specifications. 6. For envelopes not feeding correctly, make sure they are loaded properly and meet the requirements of the machine. 7. If the machine does not make a copy, check if the cartridge is installed properly, the sealing tape is removed, and the cassette is inserted completely. Also, ensure that the document is loaded correctly in the Automatic Document Feeder (ADF). 8. If the memory becomes full during copying, check if there is enough paper in the cassette or tray. Separate large documents into smaller stacks or feed them one by one. By following these steps, you can resolve the issue of the Canon PC D320 copier not feeding paper correctly from the cassette.

How can I troubleshoot if the Canon PC D320 copier is not heating up properly for rapid fusing?

To troubleshoot if the Canon PC D320 copier is not heating up properly for rapid fusing, you can follow these steps: 1. Check if the power cord is securely plugged into the machine and the wall outlet. Ensure that the power cord is inserted straight into the power cord connector on the left side of the machine. 2. Verify that the machine has power by checking if the LCD display is functioning. If the LCD remains blank, unplug the machine, wait for approximately 3-5 minutes for the temperature inside the machine to lower, and then plug it in again. 3. If the machine still does not heat up properly, unplug it and wait for a few minutes. Then, plug it back in and check if the problem is resolved. If the issue persists, contact your service representative for further assistance. By following these steps, you can troubleshoot the problem of the Canon PC D320 copier not heating up properly for rapid fusing.

Is the manual of the Canon PC D320 available in English?

Yes, the manual of the Canon PC D320 is available in English .

Is your question not listed? Ask your question here

No results