Canon LV-7585 manual

Canon LV-7585
8.2 · 1
PDF manual
 · 81 pages
English
manualCanon LV-7585
64

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.
1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21.
2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly
connected.
3. Make sure that all power is switched on.
4. If the projector still does not produce an image, restart your computer.
5. If an image still does not appear, disconnect the projector from your computer and check your computer
monitor’s display. A problem may be noticed with your graphics controller rather than with the projector.
(When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the
projector. Turn on equipment in the order of the projector and computer.)
6. If a problem still persists, check the following solutions.
No power.
Plug the power cord of the projector into the AC outlet.
Wait until the POWER indicator stops blinking to turn on the projector again. (See page
23)
Check the WARNING TEMP. indicator. If the WARNING TEMP. indicator is blinking, the
projector cannot be turned on. (See page 63.)
Check the projection lamp. (See page 59.)
Unlock the Key lock function for the projector. (See page 53)
See if the filter cartridge is inserted. (See page 57)
Image is out of focus.
Adjust the focus of the projector.
Make sure the projection screen is at least 4.6’ (1.4 m) away from the projector.
Check the projection lens to see if it needs cleaning.
NOTE: Moving the projector from a cool to a warm place may result in moisture
condensation on the projection lens. If this happens, leave the projector off and
wait until condensation evaporates.
Picture is left/right
reversed.
Check the Ceiling/Rear function. (See pages 40, 44)

Problem: Try These Solutions

Picture is top/bottom
reversed.
Check the Ceiling function. (See pages 40, 44.)
Some displays are
not seen during
operations.
Check the Display function. (See page 48.)
No image.
Check the connection between your computer or video equipment and the projector.
It takes about 30 seconds to display an image after turning on the projector.
See if the selected system is corresponding with your computer or video equipment.
Make sure the temperature is not out of specified operating temperature (41˚F–104˚F
[5˚C–40˚C]).

Appendix

appears on the
screen
The end of lamp life is approaching. Replace the lamp with a new one promptly. (See
page 59)
appears on the
screen
The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages
56-57)

Manual

View the manual for the Canon LV-7585 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon LV-7585 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon LV-7585 specifications

Below you will find the product specifications and the manual specifications of the Canon LV-7585.

General
BrandCanon
ModelLV-7585 | 2473B003
Productvideo projector
EAN4960999538204
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6500 ANSI lumens
Projection technologyLCD
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)1600:1
Screen size compatibility31” - 400” (63 x 47cm - 813 x 610cm) "
Uniformity90 %
Keystone correction, horizontal40 °
Keystone correction, vertical80 °
Vertical scan range48 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection distance14.7 m
Other features
Resolution786432 pixels
Aspect ratio4:3
Lens focal rangeF1.7 – F2.0
InterfaceD-Sub 9-pin
Dimensions (WxDxH)370 x 440 x 187 mm
Power requirements100V - 240V AC, 50/60Hz
Lens system
Digital zoom7 x
Focal length range48.2 - 62.6 mm
FocusManual
Light source
Lamp power330 W
Lamp typeNSH
Light source typeLamp
Features
Dot clock scanning frequency180 MHz
Noise level40 dB
Multimedia
Number of built-in speakers-
Ports & interfaces
S-Video inputs quantity1
Composite video in1
Component video (YPbPr/YCbCr) in1
USB 2.0 ports quantity1
DVI portYes
VGA (D-Sub) ports quantity2
Weight & dimensions
Weight13000 g
Power
Power consumption (typical)490 W
Operational conditions
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 40 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon LV-7585 below.

What is the weight of the Canon LV-7585?

The Canon LV-7585 has a weight of 13000 g.

Is the manual of the Canon LV-7585 available in English?

Yes, the manual of the Canon LV-7585 is available in English .

Is your question not listed? Ask your question here

No results