Canon LV-7585 manual

Canon LV-7585
8.2 · 1
PDF manual
 · 81 pages
English
manualCanon LV-7585
45
Press the MENU button to display the On-Screen Menu. Use
the Point 7 8 buttons to move the red frame pointer to the
Image Adjust Menu icon.
1
2
Use the Point ed buttons to move the red frame pointer to
the desired item and then press the OK button to display the
adjustment dialog box. Use the Point 7 8 buttons to adjust
the setting value.
IMAGE ADjUST MENU
Press the Point 7 button to decrease contrast; press the Point 8
button to increase the contrast (from 0 to 63).
Press the Point 7 button to decrease the brightness; press the
Point 8 button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point 7 button to decrease the intensity of the color;
press the Point 8 button to increase the intensity of the color (from
0 to 63).
Press the Point 7 8 buttons to adjust the tint value to obtain
proper color balance (from 0 to 63).
Color
]
Tint
]
Color Management
The Color Management function can be used to adjust the LEVEL,
PHASE, and GAMMA of the selected display colors (except for
black, white, and gray) on the screen and replace these colors with
other colors if required.
You can store up to eight (8) color management data.
1
Use the Point ed buttons to move the red frame pointer
to Color Management, and then press the OK button. The
projected image freezes, and the COLOR MANAGEMENT
POINTER appears.
Use the Point ed7 8 buttons to move the pointer to the
spot where you want to adjust the color and then press the
OK button. The COLOR SELECTION window appears, and
the color in the center of the pointer is selected and you can
adjust the color.
2
Use the Point ed7 8 buttons to adjust the LEVEL and
PHASE of the color, and then press the OK button to confirm
the setting. Then use the Point ed buttons to adjust the
GAMMA for the color and press the OK button to accept
the setting. After adjusting, press the OK button to go to the
COLOR MANAGEMENT LIST.
3
COLOR MANAGEMENT
POINTER
POINTER MODE

Image Adjustment

Move the red frame pointer to the desired
item and then press OK button.
Image Adjust Menu icon
Use the Point 7 8 buttons to adjust the
setting value.
COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST.
LIST

Picture Image

Note:
Displayed only in Video Input.
Tint cannot be selected when the video system
is PAL, SECAM, PAL-M, or PAL-N (p.41).
]

Manual

View the manual for the Canon LV-7585 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon LV-7585 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon LV-7585 specifications

Below you will find the product specifications and the manual specifications of the Canon LV-7585.

General
BrandCanon
ModelLV-7585 | 2473B003
Productvideo projector
EAN4960999538204
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6500 ANSI lumens
Projection technologyLCD
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)1600:1
Screen size compatibility31” - 400” (63 x 47cm - 813 x 610cm) "
Uniformity90 %
Keystone correction, horizontal40 °
Keystone correction, vertical80 °
Vertical scan range48 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection distance14.7 m
Other features
Resolution786432 pixels
Aspect ratio4:3
Lens focal rangeF1.7 – F2.0
InterfaceD-Sub 9-pin
Dimensions (WxDxH)370 x 440 x 187 mm
Power requirements100V - 240V AC, 50/60Hz
Lens system
Digital zoom7 x
Focal length range48.2 - 62.6 mm
FocusManual
Light source
Lamp power330 W
Lamp typeNSH
Light source typeLamp
Features
Dot clock scanning frequency180 MHz
Noise level40 dB
Multimedia
Number of built-in speakers-
Ports & interfaces
S-Video inputs quantity1
Composite video in1
Component video (YPbPr/YCbCr) in1
USB 2.0 ports quantity1
DVI portYes
VGA (D-Sub) ports quantity2
Weight & dimensions
Weight13000 g
Power
Power consumption (typical)490 W
Operational conditions
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 40 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon LV-7585 below.

What is the weight of the Canon LV-7585?

The Canon LV-7585 has a weight of 13000 g.

Is the manual of the Canon LV-7585 available in English?

Yes, the manual of the Canon LV-7585 is available in English .

Is your question not listed? Ask your question here

No results