Canon LV-7585 manual

Canon LV-7585
8.2 · 1
PDF manual
 · 81 pages
English
manualCanon LV-7585
39

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.
Press the MENU button to display the On-Screen Menu. Use
the Point 7 8 buttons to move the red frame pointer to the
Screen Menu icon.
1
Use the Point ed buttons to move the red frame pointer to
the desired function and then press the OK button.
2
Normal
SCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Wide
True
Provide the image in its original size. When the original image size
is larger than the screen size (1024 x 768), the projector enters to
the panning mode automatically. Use the Point ed7 8 buttons
to pan the image. When adjusted, the arrows will turn red. When
reached to the correction limits, the arrows will disappear.
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be used to
provide the squeezed video signal at 16:9.
Full screen
Provides the full screen image.
Screen Menu icon
Move the red frame pointer to the desired
function and press the OK button.
Scale H/V .............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to On,” the aspect ratio is fixed.
The “Scale V” appears dimmed and becomes
unavailable. Adjust “Scale H,” then the screen
scale is automatically modified based on the
aspect ratio.
Position H/V .......... Adjust the Horizontal/Vertical screen position.
Common .............. Save the adjusted scale to all the inputs.
Press the OK button at Common to display a
confirmation box. To save the scale, press the
OK button at “Yes.When Custom is selected,
the saved scale is used.
Reset .................... Reset the all adjusted values. Press the OK
button at Reset to display a confirmation box.
To reset, press the OK button at “Yes.
Custom
Note:
When no signal is detected, “Normal” is
set automatically and the Aspect dialog box
disappears.
The adjustable range for Scale H/V and Position
H/V is limited depending on the input signal.
Press the OK button at Common or Reset,
to display a confirmation box.

Computer Input

Adjust the screen scale and position manually with this function.
Press the OK button at Custom and the “Custom” is displayed on
the screen for a few seconds. To display the Aspect dialog box,
press the OK button at Custom again and then the Aspect dialog
box appears.
Note:
The projector cannot display any resolution
higher than 1600 x 1200. If your computers
screen resolution is higher than 1600 x 1200,
lower the resolution before connecting the
projector.
The image data other than XGA (1024 x 768) is
modified to fit the screen size in initial mode.
True, Full screen, and Digital zoom +/– cannot
be selected when no signal is detected in the PC
System Menu. (p.34)

Manual

View the manual for the Canon LV-7585 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon LV-7585 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon LV-7585 specifications

Below you will find the product specifications and the manual specifications of the Canon LV-7585.

General
BrandCanon
ModelLV-7585 | 2473B003
Productvideo projector
EAN4960999538204
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6500 ANSI lumens
Projection technologyLCD
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)1600:1
Screen size compatibility31” - 400” (63 x 47cm - 813 x 610cm) "
Uniformity90 %
Keystone correction, horizontal40 °
Keystone correction, vertical80 °
Vertical scan range48 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection distance14.7 m
Other features
Resolution786432 pixels
Aspect ratio4:3
Lens focal rangeF1.7 – F2.0
InterfaceD-Sub 9-pin
Dimensions (WxDxH)370 x 440 x 187 mm
Power requirements100V - 240V AC, 50/60Hz
Lens system
Digital zoom7 x
Focal length range48.2 - 62.6 mm
FocusManual
Light source
Lamp power330 W
Lamp typeNSH
Light source typeLamp
Features
Dot clock scanning frequency180 MHz
Noise level40 dB
Multimedia
Number of built-in speakers-
Ports & interfaces
S-Video inputs quantity1
Composite video in1
Component video (YPbPr/YCbCr) in1
USB 2.0 ports quantity1
DVI portYes
VGA (D-Sub) ports quantity2
Weight & dimensions
Weight13000 g
Power
Power consumption (typical)490 W
Operational conditions
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 40 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon LV-7585 below.

What is the weight of the Canon LV-7585?

The Canon LV-7585 has a weight of 13000 g.

Is the manual of the Canon LV-7585 available in English?

Yes, the manual of the Canon LV-7585 is available in English .

Is your question not listed? Ask your question here

No results