Canon LV-7585 manual

Canon LV-7585
8.2 · 1
PDF manual
 · 81 pages
English
manualCanon LV-7585
23

Turning On the Projector

Connect the projector’s AC power cord into an AC
outlet. The LAMP indicator lights red and the POWER
indicator lights green.
Press the POWER button on the side control or the
ON button on the remote control unit. The LAMP
indicator dims and the cooling fans start to operate.
The preparation display appears on the screen and the
countdown starts.
2
3
1
The preparation display will disappear after 30
seconds.
4
After the countdown, the input source that was
selected the last time and the Lamp mode status icon
(see page 51) appear on the screen.
If the projector is locked with a PIN code, PIN code
Input Dialog Box will appear. Enter the PIN code as
instructed below.
Selected Input Source and Lamp mode
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
What is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on page 53-54 for
locking operation of the projector with your PIN code.
PIN code Input Dialog Box
Enter a PIN code
After the OK icon
disappears, you can
operate the projector.
Lamp mode status
See page 51 for the Lamp mode status
Note:
The Lamp replacement icon and the Filter
replacement or the Filter cartridge replacement
icon may appear on the screen depending on the
usage state of the projector.
When the filter cartridge replacement icon
keeps appearing on the screen at turning on the
projector for some time and no action is taken
to replace the filter cartridge, the projector will
be automatically shut down in 3 minutes after
turning on to protect the projector. (pp. 56-58, 70)
Use the Point ed buttons on the side control or Number
buttons on the remote control unit to enter a number.
When using side control
Use the Point ed buttons on the side control to select a
number. Press the Point 8 button to fix the number and
move the red frame pointer to the next box. The number
changes to .” Repeat this step to complete entering a
four-digit number. After entering the four-digit number, move
the pointer to “Set.” Press the OK button so that you can
start to operate the projector.
When using remote control unit
Press the Number buttons on the remote control unit to
enter a number (p.14). When you complete entering a four-
digit number, the pointer moves to “Set.” Press the OK
button so that you can start to operate the projector.
If you fixed an incorrect number, use the Point 7 button to
move the pointer to the number you want to correct, and
then enter the correct number.
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the
correct PIN code all over again.
Note:
When the Logo select function is set to “Off,” the
logo will not be shown on the screen (p.49).
When the “Countdown off” or Off” is selected
in the Display function, the countdown will not
be shown on the screen (p.48).
During the countdown period, all operations are
invalid.
If the correct PIN code number is not entered
within three minutes after the PIN code dialog
box appeared, the projector will be turned off
automatically.
The “1234” is set as the initial PIN code at the
factory.

Basic Operation

16

Manual

View the manual for the Canon LV-7585 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon LV-7585 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Canon LV-7585 specifications

Below you will find the product specifications and the manual specifications of the Canon LV-7585.

General
BrandCanon
ModelLV-7585 | 2473B003
Productvideo projector
EAN4960999538204
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6500 ANSI lumens
Projection technologyLCD
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)1600:1
Screen size compatibility31” - 400” (63 x 47cm - 813 x 610cm) "
Uniformity90 %
Keystone correction, horizontal40 °
Keystone correction, vertical80 °
Vertical scan range48 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection distance14.7 m
Other features
Resolution786432 pixels
Aspect ratio4:3
Lens focal rangeF1.7 – F2.0
InterfaceD-Sub 9-pin
Dimensions (WxDxH)370 x 440 x 187 mm
Power requirements100V - 240V AC, 50/60Hz
Lens system
Digital zoom7 x
Focal length range48.2 - 62.6 mm
FocusManual
Light source
Lamp power330 W
Lamp typeNSH
Light source typeLamp
Features
Dot clock scanning frequency180 MHz
Noise level40 dB
Multimedia
Number of built-in speakers-
Ports & interfaces
S-Video inputs quantity1
Composite video in1
Component video (YPbPr/YCbCr) in1
USB 2.0 ports quantity1
DVI portYes
VGA (D-Sub) ports quantity2
Weight & dimensions
Weight13000 g
Power
Power consumption (typical)490 W
Operational conditions
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 40 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon LV-7585 below.

What is the weight of the Canon LV-7585?

The Canon LV-7585 has a weight of 13000 g.

Is the manual of the Canon LV-7585 available in English?

Yes, the manual of the Canon LV-7585 is available in English .

Is your question not listed? Ask your question here

No results