Canon LP-E10 manual

Canon LP-E10
9.1 · 1
PDF manual
 · 1 page
English
manualCanon LP-E10

Battery Pack LP-E1 0

[§I

Instructions

Thank you for purchasing a Canon product.
To
recharge this battery, use Battery Charger
LC-E101LC-E10E.
This battery pack is not fully recharged upon factory
shipment. Recharge it before using.
When storing the battery, attach the protective cover to
prevent the electrical contacts from shorting.
Also read "Tips for Using the Battery and Charger" in the
camera's instruction manual.
Specifications
Type: Rated voltage: Battery capacity: Rechargeable lithium ion battery 7.4 V DC 860 mAh
Working temperature range: Charging: +6"C - +40"C
I
43"F-104"F Shooting: O"C - +40"C
I
32"
F-
104"F Working humidity: Dimensions (W x
H x D):
Weight:
85%
or
less
36.2 x 14.7 x 49.0 mm
I
1.4 X 0.6 X 1.9
in.
Approx. 45 g I 1.6 oz.
(excluding protective cover)
All the specifications above are based on Canon's testing
standards.
The product specifications and exterior are subject to
change without notice.
Safety Warnings
Always charge the battery at a temperature between +6°C/43°F
and +40oC/104°F.
If
the
battery is charged outside this temperature
range, the battery may leak, overheat,
or
be damaged resulting in
burns or other injuries.
Do not use this battery
if
it becomes hot,
or
emits smoke
or
a
burning smell, as this
may
result in a fire
or
injury. While taking
care not to burn yourself, remove the battery from the camera and
contact your dealer
or
local Canon service facility.
Never charge the battery with a charger other than the Canon
Battery Charger LC-E10/LC-E10E. This could
result in the battery leaking, overheating,
or
being damaged and causing a fire, burns
or
other injuries. Never disassemble
or
attempt to modify the Battery Pack LP-E10.
Refer all repairs
or
internal inspections to your dealer
or
nearest Canon service facility.
Do not place the battery in a dusty
or
humid location. This could result
in
electric shock, the battery overheating or a fire hazard.
Never short the terminal on the battery. This could result in the
battery leaking, overheating,
or
being damaged and causing burns
or
other injuries. Always attach the protective cover when storing the
battery, to prevent shorting.
Safety Precautions
Do
not use
or
store the battery in places exposed to direct sunlight,
high temperatures,
or
near sources
of
h
ea
t.
This could result in the
battery leaking, overheating,
or
being damaged and causing burns
or
other injuries.
If
the battery pack leaks, be careful that battery fluid does not
get
on
your skin or clothes. The battery fluid can cause burns
if
it
co
mes
into contact with the skin.
If
battery fluid gets on your skin, wash it
completely off with clean water immediately.
Do
not store in cold environments. The product itself can become
cold and cause an injury when it is touched.
USA and Canada only:
The Lithium ion/polymer battery is recyclable. Please
caii1-800-8-BATTERY
for information on how
to
recycle this battery.

View the manual for the Canon LP-E10 here, for free. This manual comes under the category batteries and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Canon LP-E10 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon LP-E10 battery is a power source designed for use with Canon digital cameras. It is compatible with select Canon EOS Rebel models, including the T3, T5, T6, and T7. The battery is specifically engineered to provide a reliable source of power for extended periods of use, ensuring that photographers can capture the shots they desire without interruption. Constructed with high-quality materials, the LP-E10 battery is built to withstand regular use and provide long-lasting performance. It offers a capacity of 860mAh, enabling photographers to capture a significant number of photos before needing to recharge. Additionally, the LP-E10 battery features a voltage of 7.4V, providing sufficient power for the camera's functions. The Canon LP-E10 battery is lightweight and compact, making it convenient for photographers to carry as a spare or replacement battery during their shoots. It is easily rechargeable using Canon-approved chargers, providing users with the flexibility to power up their batteries in various settings. With its reliable performance and compatibility with select Canon camera models, the LP-E10 battery offers photographers a dependable power source to capture clear and vibrant images.

General
BrandCanon
ModelLP-E10 | 5108B002
Productbattery
EAN0012303514924, 0013803133455, 0052778835933, 0138031334556, 0151903083185, 0163120306350, 0789961973447, 0999992678833, 3609740154034, 4960999688855, 5052883307832, 5053460293470, 5053460874822, 5053959360911, 5054531155703
LanguageEnglish
FiletypeUser manual (PDF)
Features
Battery technology-
Battery capacity- mAh
Battery voltage- V
Product colorBlack
Compatible productsEOS 1100D\nEOS Rebel T3\nLC-E10
Weight & dimensions
Weight- g
Weight- g
Battery
Battery technology-
Battery capacity- mAh
Battery voltage- V
Product colorBlack
Compatible productsEOS 1100D\nEOS Rebel T3\nLC-E10
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon LP-E10 below.

What is the weight of the Canon LP-E10?

The Canon LP-E10 has a weight of - g.

How long does it take to fully recharge the Canon LP-E10 battery?

The Canon LP-E10 battery takes approximately 2 to 3 hours to fully recharge. To recharge the battery, follow these steps: 1. Use the Battery Charger LC-E101LC-E10E provided with the battery. 2. Before using the battery for the first time, make sure to fully recharge it. The battery is not fully charged when it is shipped from the factory. 3. Connect the battery charger to a power source using the included power cord. 4. Insert the LP-E10 battery into the charger, ensuring that the contacts on the battery align with the contacts on the charger. 5. The charger's indicator light will turn on to indicate that the battery is charging. 6. Wait for approximately 2 to 3 hours for the battery to fully recharge. The indicator light will turn off or change color when the charging process is complete. 7. Once the battery is fully charged, remove it from the charger and disconnect the charger from the power source. It is important to note that charging the battery at temperatures between +6°C/43°F and +40°C/104°F is recommended to prevent any damage or safety issues.

What should I do if the battery is not charging properly with the recommended Battery Charger (LC-E101LC-E10E)?

If the Canon LP-E10 battery is not charging properly with the recommended Battery Charger (LC-E101LC-E10E), you can try the following steps: 1. Ensure that the battery is properly inserted into the charger. Check that the contacts on the battery align with the contacts on the charger. 2. Make sure that the charger is securely connected to a power source. Check the power cord and ensure it is plugged in correctly. 3. Verify that the power source is functioning properly. Try plugging the charger into a different power outlet or using a different power cord. 4. Clean the battery contacts and charger contacts. Use a soft, dry cloth to remove any dirt or debris that may be interfering with the charging process. 5. Check the working temperature range. Ensure that the charging temperature is between +6°C/43°F and +40°C/104°F. Charging the battery outside this temperature range may cause issues. 6. If none of the above steps resolve the issue, try using a different battery charger or contact your dealer or local Canon service facility for further assistance. Remember to always follow the safety precautions mentioned in the manual to avoid any potential hazards or damage to the battery.

Can I use a different charger to recharge the Canon LP-E10 battery?

Yes, you can use a different charger to recharge the Canon LP-E10 battery. However, it is recommended to use the Canon Battery Charger LC-E101LC-E10E specifically designed for this battery. Using a different charger may result in the battery leaking, overheating, or being damaged, which can cause a fire, burns, or other injuries. To ensure the safety and proper functioning of the battery, it is advised to follow these guidelines: 1. Always charge the battery at a temperature between +6°C/43°F and +40°C/104°F. Charging the battery outside this temperature range may lead to leakage, overheating, or damage. 2. Never disassemble or modify the Battery Pack LP-E10. Any repairs or internal inspections should be done by a dealer or a Canon service facility. 3. Avoid placing the battery in a dusty or humid location, as it can result in electric shock, overheating, or a fire hazard. 4. Never short the terminals on the battery. Always attach the protective cover when storing the battery to prevent shorting. 5. Do not use or store the battery in places exposed to direct sunlight, high temperatures, or near sources of heat. This can cause leakage, overheating, or damage. 6. If the battery pack leaks, avoid contact with the battery fluid and wash it off immediately with clean water if it comes into contact with the skin. Following these precautions will help ensure the safe and proper charging of the Canon LP-E10 battery.

What are the recommended working temperature ranges for the Canon LP-E10 battery?

The recommended working temperature ranges for the Canon LP-E10 battery are as follows: - Charging: +6°C to +40°C (43°F to 104°F) - Shooting: 0°C to +40°C (32°F to 104°F) It is important to note that charging the battery outside of this temperature range may result in leakage, overheating, or damage to the battery, which can cause burns or other injuries. Additionally, it is advised not to use or store the battery in places exposed to direct sunlight, high temperatures, or near sources of heat, as this can also lead to leakage, overheating, or damage. If the battery becomes hot, emits smoke, or a burning smell, it is recommended to remove the battery from the camera and contact your dealer or local Canon service facility. It is also important to avoid shorting the terminals on the battery and to always attach the protective cover when storing the battery to prevent shorting. Please ensure to follow these safety precautions to maintain the proper functioning and longevity of the Canon LP-E10 battery.

How can I prevent shorting of the battery terminals when handling the Canon LP-E10 battery?

To prevent shorting of the battery terminals when handling the Canon LP-E10 battery, follow these steps: 1. Always handle the battery with clean and dry hands. Moisture or dirt on your hands can cause a short circuit. 2. Before inserting or removing the battery, make sure the device is turned off. This reduces the risk of accidental contact between the battery terminals and other metal objects. 3. When inserting the battery, ensure that the contacts on the battery align with the contacts in the device. Insert the battery gently and avoid applying excessive force. 4. Use the provided protective cover when storing or transporting the battery. The cover helps to prevent accidental contact between the battery terminals and other objects. 5. Avoid placing the battery in a bag or pocket with metal objects such as keys or coins. These objects can potentially cause a short circuit if they come into contact with the battery terminals. 6. If you notice any damage to the battery or its terminals, do not use it and contact your dealer or local Canon service facility for assistance. By following these precautions, you can minimize the risk of shorting the battery terminals and ensure safe handling of the Canon LP-E10 battery.

Is the manual of the Canon LP-E10 available in English?

Yes, the manual of the Canon LP-E10 is available in English .

Is your question not listed? Ask your question here

No results