Canon LiDE 300 manual

Canon LiDE 300
9.7 · 1
PDF manual
 · 106 pages
English
manualCanon LiDE 300

Allgemeine Hinweise (Scanner-Treiber)

ScanGear (Scanner-Treiber) unterliegt folgenden Einschränkungen. Berücksichtigen Sie diese bei der
Verwendung.

Scanner-Treiber-Einschränkungen

Bei Verwendung des NTFS-Dateisystems wird die TWAIN-Datenquelle möglicherweise nicht
aufgerufen. Der Grund dafür ist, dass das TWAIN-Modul aus Sicherheitsgründen nicht in den Ordner
"winnt" geschrieben werden kann. Wenn Sie Hilfe benötigen, setzen Sie sich mit dem Administrator
des Computers in Verbindung.
Einige mit dem Gerät verbundene Computer (einschließlich Laptops) arbeiten aus dem Standby-
Modus heraus möglicherweise nicht korrekt weiter. Starten Sie den Computer in diesem Fall neu.
Schließen Sie nicht zwei oder mehr Scanner oder Multifunktionsdrucker mit Scannerfunktion
gleichzeitig an denselben Computer an. Wenn mehrere Scangeräte angeschlossen sind, ist es nicht
möglich, über das Bedienfeld oder die Scan-Tasten des Geräts zu scannen. Außerdem können beim
Zugriff auf die Geräte Fehler auftreten.
Die Kalibrierung kann einige Zeit dauern, wenn das Gerät über USB1.1 angeschlossen ist.
Der Scan-Vorgang kann fehlschlagen, wenn der Computer gerade aus dem Ruhezustand erwacht ist.
Führen Sie in diesem Fall folgende Schritte aus und scannen Sie erneut.
Wenn Ihr Modell nicht über eine POWER-Taste verfügt, führen Sie nur Schritt 2 aus.
1. Schalten Sie das Gerät aus.
2. Schließen Sie ScanGear, ziehen Sie das USB-Kabel vom Computer ab und schließen Sie es neu
an.
3. Schalten Sie das Gerät ein.
Starten Sie den Computer neu, wenn der Scan-Vorgang weiterhin fehlschlägt.
Sie können ScanGear nicht in mehreren Anwendungen gleichzeitig öffnen. Wenn ScanGear bereits in
einer Anwendung geöffnet ist, können Sie es nicht noch einmal öffnen.
Schließen Sie unbedingt zuerst das Fenster von ScanGear, bevor Sie die Anwendung schließen.
Wenn Sie ein netzwerkfähiges Gerät in einem Netzwerk verwenden, können nicht mehrere Computer
gleichzeitig auf das Gerät zugreifen.
Bei Verwendung eines netzwerkfähigen Modells in einem Netzwerk dauert das Scannen länger als
gewöhnlich.
Stellen Sie beim Scannen großer Bilder mit hoher Auflösung sicher, dass ausreichend
Festplattenspeicher zur Verfügung steht. Beispielsweise sind zum Scannen eines A4-Dokuments mit
einer Auflösung von 600 dpi in Farbe mindestens 300 MB an freiem Speicherplatz erforderlich.
ScanGear und der WIA-Treiber können nicht gleichzeitig verwendet werden.
Schalten Sie den Computer während des Scan-Vorgangs nicht in den Standby-Modus.

Anwendungen mit Verwendungseinschränkungen

Einige Anwendungen zeigen die TWAIN-Benutzeroberfläche möglicherweise nicht an. Lesen Sie in
diesem Fall im Handbuch der Anwendung nach und ändern Sie die Einstellungen entsprechend.
Einige Anwendungen bieten keine Unterstützung für das fortlaufende Scannen mehrerer Bilder. In
einigen Fällen wird nur das erste gescannte Bild akzeptiert oder es werden mehrere Bilder als ein Bild
82

View the manual for the Canon LiDE 300 here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Canon LiDE 300 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon LiDE 300 scanner is a flatbed scanner that allows for easy and efficient scanning of various documents and photos. With a maximum scan size of 215.9 x 297.18 millimeters, it can accommodate a wide range of paper sizes, including letter, legal, and A4. Equipped with a high optical scanning resolution of 2400 x 2400 DPI, the LiDE 300 ensures clear and detailed scans, capturing even the smallest text or intricate details. Its color scanning capability adds vibrancy and accuracy to scanned images, making them appear lifelike and true to the original. With an input greyscale depth of 16 bits and an output greyscale depth of 8 bits, this scanner is able to accurately reproduce shades of gray, resulting in nuanced and realistic monochrome scans. The Canon LiDE 300 features a Contact Image Sensor (CIS) as its sensor type, which allows for fast and efficient scanning by quickly capturing the information from the document or photo. Its RGB LED light source ensures consistent and accurate lighting, enhancing the quality of the scanned images. Although the LiDE 300 does not have a built-in display, it can easily be connected to a computer or laptop for easy viewing and editing of scanned files. Its compact design makes it easy to store and transport, ideal for those who need a scanner on-the-go. Overall, the Canon LiDE 300 scanner is a reliable and efficient device for all scanning needs. With its high-resolution capabilities, color scanning, and easy-to-use design, it is a practical choice for both home and office use.

General
BrandCanon
ModelLiDE 300 | 2995C018
Productscanner
EAN4549292119770
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Maximum scan size215.9 x 297.18 mm
Optical scanning resolution2400 x 2400 DPI
Color scanningYes
Duplex scanning-
Input color depth48 bit
Output color depth48 bit
Input grayscale depth16 bit
Output grayscale depth8 bit
ADF scan speed (b/w, A4)- ppm
Design
Scanner typeFlatbed scanner
Built-in displayNo
Product colorBlack
Performance
Sensor typeCIS
Light sourceRGB LED
Daily duty cycle (max)- pages
Button functionsCopy, Scan
Ports & interfaces
Standard interfacesUSB 2.0
USB version2.0
USB portYes
Power
Power supply typeAC
Power consumption (typical)4.5 W
Power consumption (standby)0.3 W
Operational conditions
Operating temperature (T-T)41 - 95 °F
Operating relative humidity (H-H)10 - 90 %
Technical details
Sustainability certificatesENERGY STAR
Packaging content
Cables includedUSB
Paper handling
Maximum ISO A-series paper sizeA4
Scanning media types supportedPhoto paper
LetterYes
Weight & dimensions
Width367 mm
Depth250 mm
Height42 mm
Weight1700 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon LiDE 300 below.

What is the weight of the Canon LiDE 300?

The Canon LiDE 300 has a weight of 1700 g.

What is the height of the Canon LiDE 300?

The Canon LiDE 300 has a height of 42 mm.

What is the width of the Canon LiDE 300?

The Canon LiDE 300 has a width of 367 mm.

What is the depth of the Canon LiDE 300?

The Canon LiDE 300 has a depth of 250 mm.

How do I install the Canon LiDE 300 scanner onto my computer?

Before connecting the scanner to your computer, make sure to install the necessary software from the Canon website. Once installed, connect the scanner to your computer using the provided USB cable and follow the on-screen instructions to complete the installation process.

How can I adjust the scanning resolution on my Canon LiDE 300 scanner?

To adjust the scanning resolution, open the scanning software on your computer. Look for the option to change resolution or DPI (dots per inch). Increasing the DPI value will result in higher quality scans, while lowering it will decrease the file size. Experiment with different settings to find the balance that suits your needs.

Why are my scanned documents turning out skewed or crooked?

Ensure that the documents are properly aligned against the edge guide of the scanner. If they are still skewing, there might be dust or debris on the scanning glass. To clean the glass, use a lint-free cloth slightly dampened with glass cleaner or isopropyl alcohol, and gently wipe the surface. Avoid pressing too hard or using abrasive materials that may scratch the glass.

How can I scan multiple pages into a single document using the Canon LiDE 300 scanner?

For multi-page scanning, you can utilize the scanning software provided with the scanner. Look for an option such as "Multipage" or "Batch Scan." Select this option, place your pages in the scanner one by one, and follow the instructions to save them as a single PDF or other desired file format.

What should I do if my Canon LiDE 300 scanner is not scanning any documents?

Firstly, ensure that the scanner is properly connected to your computer and turned on. If the issue persists, try restarting both the scanner and your computer. If the problem persists, check if the scanning software is properly installed and up to date. Additionally, make sure that there is sufficient space on your computer's hard drive for the scanned files. If none of these steps resolve the issue, contact Canon customer support for further assistance.

Does the Canon LiDE 300 have a maximum scan size of 215.9 x 297.18 mm?

Yes, the Canon LiDE 300 has a maximum scan size of 215.9 x 297.18 mm. This means the user can scan documents up to A4 size, which is standard for most scanning needs.

What is the optical scanning resolution of the Canon LiDE 300?

The Canon LiDE 300 has an optical scanning resolution of 2400 x 2400 DPI. This high resolution ensures that the scanned documents will be of high quality and detail.

Is the Canon LiDE 300 a flatbed scanner?

Yes, the Canon LiDE 300 is a flatbed scanner. This makes it easier for the user to scan documents, photos, and other media of various sizes and shapes.

Does the Canon LiDE 300 have a built-in display?

No, the Canon LiDE 300 does not have a built-in display. This means that the user will need to connect it to a computer to view and manage scanned documents.

Does the Canon LiDE 300 have ENERGY STAR sustainability certificates?

Yes, the Canon LiDE 300 has ENERGY STAR sustainability certificates. This means that it is energy-efficient and environmentally friendly compared to other similar products on the market.

Is the manual of the Canon LiDE 300 available in English?

Yes, the manual of the Canon LiDE 300 is available in English .

Is your question not listed? Ask your question here

No results