Canon imageFORMULA ScanFront 400 manual

Canon imageFORMULA ScanFront 400
5.8 · 1
PDF manual
 · 216 pages
English
manualCanon imageFORMULA ScanFront 400
2
ENERGY STAR
®
Office Equipment Program
This program is for U.S.A and Canada. As an
ENERGY STAR
®
Partner, Canon Electronics
Inc. has determined that this machine meets the
ENERGY STAR
®
Program guidelines for
energy efficiency.
The ENERGY STAR
®
Office Equipment Program is an
international program that promotes energy saving through
the use of computers and other office equipment.
The program backs the development and dissemination of
products with functions that effectively reduce energy
consumption. It is an open system in which business
proprietors can participate voluntarily. The targeted products
are office equipment, such as computers, monitors, printers,
fax, machine, copiers, and scanners. The standards and logos
are uniform among participating nations.
Under factory default settings, the scanner will enter Low
Power mode after 12 minutes of inactivity. Although you can
change the period of time before the scanner enters Low
Power mode to up to 120 minutes, we recommend using the
default setting.
FCC REGULATIONS (For 120 V model)
Network Scanner, Model M111271
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Use of shielded cable is required to comply with class B limits
in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment
unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
Canon U.S.A. Inc.
One Canon Park, Melville, NY 11747, U.S.A.
Tel. No. (800)652-2666

View the manual for the Canon imageFORMULA ScanFront 400 here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the Canon imageFORMULA ScanFront 400 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelimageFORMULA ScanFront 400 | 0697C001
Productscanner
EAN4528472106960, 4058154137024, 0013803265743
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Light sourceRGB LED
Daily duty cycle (max)6000 pages
Scan file formatsJPG, PDF, PNG, TIFF
Scan toE-mail, FTP, Fax, USB
Sensor typeCMOS CIS
Scanning
Duplex scanningYes
Color scanningYes
Optical scanning resolution600 x 600 DPI
Black/white scanning color modesGrayscale
Maximum scan size216 x 356 mm
Film scanning-
Grayscale levels256
ADF scan speed (b/w, A4)45 ppm
ADF scan speed (color, A4)45 ppm
Ports & interfaces
Standard interfacesRJ-45, USB 2.0
Design
Built-in displayYes
DisplayLCD
Display diagonal10.1 "
TouchscreenYes
Display resolution1024 x 600 pixels
Scanner typeADF scanner
Product colorBlack
Paper handling
Maximum scan width216 mm
Maximum scan length356 mm
Media thickness (min)0.04 mm
Scanning media types supportedBusiness Card, Plain paper
Maximum ISO A-series paper sizeA4
ISO A-series sizes (A0...A9)A4
Input capacity
Standard input capacity60 sheets
Network
Supported network protocolsTCP / IP (IPv4), DNS, DHCP, SMB, NTP, HTTP, FTP, SFTP, WebDAV, LDAPS
Packaging content
Bundled softwareScanFront Administration Tool Web Application Toolkit
Weight & dimensions
Width305 mm
Depth230 mm
Height282 mm
Weight4500 g
Power
AC input frequency50 - 60 Hz
Input voltage100/240 V
Power consumption (typical)40 W
Power consumption (off)0.5 W
Power supply typeAC
Operational conditions
Operating temperature (T-T)10 - 32.5 °C
Operating relative humidity (H-H)20 - 80 %
Technical details
Sustainability certificatesRoHS, ENERGY STAR
Features
CompatibilityimageFORMULA ScanFront 400/DR-C240
Brand compatibilityCanon
TypeCarrier sheet
Packaging data
Quantity per pack1 pc(s)
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFORMULA ScanFront 400 below.

What is the weight of the Canon imageFORMULA ScanFront 400?

The Canon imageFORMULA ScanFront 400 has a weight of 4500 g.

What is the screen size of the Canon imageFORMULA ScanFront 400?

The screen size of the Canon imageFORMULA ScanFront 400 is 10.1 ".

What is the height of the Canon imageFORMULA ScanFront 400?

The Canon imageFORMULA ScanFront 400 has a height of 282 mm.

What is the screen resolution of the display of the Canon imageFORMULA ScanFront 400?

The screen resolution of the Canon imageFORMULA ScanFront 400 is 1024 x 600 pixels.

What is the width of the Canon imageFORMULA ScanFront 400?

The Canon imageFORMULA ScanFront 400 has a width of 305 mm.

What is the depth of the Canon imageFORMULA ScanFront 400?

The Canon imageFORMULA ScanFront 400 has a depth of 230 mm.

Does the Canon imageFORMULA ScanFront 400 have a built-in display?

Yes, the Canon imageFORMULA ScanFront 400 has a 10.1" LCD display, making it easy for users to navigate and operate the scanner.

Can the Canon imageFORMULA ScanFront 400 scan both sides of a document simultaneously?

Yes, the Canon imageFORMULA ScanFront 400 supports duplex scanning, which saves users time and increases efficiency.

What is the maximum daily duty cycle of the Canon imageFORMULA ScanFront 400?

The maximum daily duty cycle of the Canon imageFORMULA ScanFront 400 is 6000 pages, indicating its high durability and suitability for heavy use.

What is the optical scanning resolution of the Canon imageFORMULA ScanFront 400?

The Canon imageFORMULA ScanFront 400 has an optical scanning resolution of 600 x 600 DPI, ensuring high-quality scanned documents with sharp details.

What network protocols are supported by the Canon imageFORMULA ScanFront 400?

The Canon imageFORMULA ScanFront 400 supports various network protocols such as TCP / IP, DNS, and HTTP, enabling seamless connectivity and integration with existing networks.

How can I transfer scanned image files to shared folders using the ScanFront 400?

To transfer scanned image files to shared folders using the Canon imageFORMULA ScanFront 400 scanner, follow these steps: 1. Ensure the FTP Server function is enabled on the ScanFront 400. 2. Scan the image using the scanner. 3. Choose the option to transfer the scanned image to a shared folder on a server PC or client PC on the network. 4. The image file will be transferred to the designated shared folder. 5. If needed, you can also save the image files to a USB memory when not in a network environment. By following these steps, you can easily transfer scanned image files to shared folders using the ScanFront 400 scanner.

How can I ensure high image quality when scanning documents with the ScanFront 400?

To ensure high image quality when scanning documents with the Canon imageFORMULA ScanFront 400 scanner, follow these steps: 1. Use the Auto Size Detection feature to accurately detect the size of the scanned document and eliminate white space around the image. 2. Enable the Auto Color Detection function to automatically determine whether the document is color or black and white, saving the scanned images accordingly. 3. Utilize the Deskew feature to straighten the image if the scanner detects that the document was fed askew. 4. Take advantage of the Image Rotation capability to rotate the scanned image in 90° increments or detect text orientation within the document for correct orientation. 5. Adjust the brightness in the scanning conditions before scanning thin paper documents to prevent the image on the opposite side from showing through. 6. Ensure that documents meet the specified criteria for scannability, such as grouping pages together with the same size, thickness, and weight to avoid jams and maintain image quality.

Is the manual of the Canon imageFORMULA ScanFront 400 available in English?

Yes, the manual of the Canon imageFORMULA ScanFront 400 is available in English .

Is your question not listed? Ask your question here

No results