Canon imageFORMULA DR-M260 manual

Canon imageFORMULA DR-M260
8 · 1
PDF manual
 · 106 pages
English
manualCanon imageFORMULA DR-M260
2

FCC REGULATIONS (For 120 V model)

Document Scanner, Model M111281
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
ONE CANON PARK, MELVILLE, NY 11747, U.S.A.
Tel. No. (800)652-2666

RADIO INTERFERENCE REGULATIONS (For 120 V

models)

This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the interference-
causing equipment standard entitled “Digital Apparatus”, ICES-003 of
the Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE

(For 120 V models)

Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la
norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003
édictée par l’Industrie Canada.

International ENERGY STAR

®

Office Equipment Program

As an ENERGY STAR
®
Partner, CANON
ELECTRONICS INC. has determined that this
machine meets the ENERGY STAR
®
Program
guidelines for energy efficiency.
The International ENERGY STAR
®
Office Equipment
Program is an international program that promotes
energy saving through the use of computers and other office
equipment. The program backs the development and dissemination of
products with functions that effectively reduce energy consumption. It
is an open system in which business proprietors can participate
voluntarily. The targeted products are office equipment, such as
computers, monitors, printers, fax, machine, copiers, and scanners.
The standards and logos are uniform among participating nations.
This model doesn’t provide setting options for power management.

European Union (and EEA) only.

This symbol indicates that this product is not to be disposed
of with your household waste, according to the WEEE
Directive (2002/96/EC) and your national law. This product
should be handed over to a designated collection point,
e.g., on an authorized one-for-one basis when you buy a
new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (EEE). Improper handling of
this type of waste could have a possible negative impact on the
environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute
to the effective usage of natural resources. For more information
about where you can drop off your waste equipment for recycling,
please contact your local city office, waste authority, approved WEEE
scheme or your household waste disposal service. For more
information regarding return and recycling of WEEE products, please
visit www.canon-europe.com/environment
.
(EEA: Norway, Iceland and Liechtenstein)

View the manual for the Canon imageFORMULA DR-M260 here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Canon imageFORMULA DR-M260 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon imageFORMULA DR-M260 is an ADF scanner that offers a maximum scan size of 216 x 356 millimeters. With an optical scanning resolution of 600 x 600 DPI, it delivers clear and detailed scans. The scanner supports color scanning, allowing for accurate reproduction of vibrant images and documents. Equipped with duplex scanning capabilities, it can efficiently scan both sides of a document simultaneously, saving time and increasing productivity. It offers 256 levels of greyscale, ensuring accurate capture of subtle variations in shades of grey. When scanning black and white documents in A4 size, the ADF scan speed is an impressive 60 pages per minute, while the duplex ADF scan speed is 120 images per minute. This fast scanning speed enables efficient handling of large volumes of documents. The Canon imageFORMULA DR-M260 features a built-in display, providing users with convenient access to settings and information. This display enhances ease of use and simplifies the scanning process. Constructed with high-quality materials, this scanner is designed to be reliable and durable over time. Its robust build ensures that it can withstand frequent use in demanding environments. In summary, the Canon imageFORMULA DR-M260 is an ADF scanner with impressive scanning capabilities. Its maximum scan size, optical scanning resolution, and color scanning support make it suitable for various applications. Additionally, its duplex scanning feature, greyscale levels, and fast scan speeds contribute to efficient and accurate document handling. The inclusion of a built-in display enhances user experience and convenience. With its reliable construction, this scanner is built to withstand long-term use.

General
BrandCanon
ModelimageFORMULA DR-M260 | 2405C001
Productscanner
EAN4528472107691
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Maximum scan size216 x 356 mm
Optical scanning resolution600 x 600 DPI
Color scanningYes
Duplex scanningYes
Input color depth24 bit
Film scanning-
Grayscale levels256
ADF scan speed (b/w, A4)60 ppm
ADF scan speed (color, A4)60 ppm
Duplex ADF scan speed (b/w, A4)120 ipm
Duplex ADF scan speed (color, A4)120 ipm
Background colorsWhite
Design
Scanner typeADF scanner
Built-in displayYes
Product colorBlack
DisplayLCD
Performance
Sensor typeCMOS CIS
Daily duty cycle (max)7500 pages
Scan driversICA, TWAIN
Input capacity
Standard input capacity80 sheets
Paper handling
Maximum ISO A-series paper sizeA4
Scanning media types supportedBusiness Card, Plastic Card
Media thickness (min)0.04 mm
Maximum scan width216 mm
Maximum scan length5588 mm
Ports & interfaces
Standard interfacesUSB 3.2 Gen 1 (3.1 Gen 1)
USB portYes
USB version3.2 Gen 2 (3.1 Gen 2)
Power
Power supply typeAC
Power consumption (typical)23 W
Power consumption (standby)1.4 W
AC input frequency50 - 60 Hz
Input voltage100 V
Operational conditions
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Weight & dimensions
Width285 mm
Depth254 mm
Height231 mm
Weight3400 g
Packaging content
AC adapter includedYes
Cables includedUSB
System requirements
Windows operating systems supportedWindows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2008 R2 x64, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2, Windows Server 2012 R2 x64, Windows Server 2012 x64
Other features
Scan media weight27 - 413 g/m²
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFORMULA DR-M260 below.

What is the weight of the Canon imageFORMULA DR-M260?

The Canon imageFORMULA DR-M260 has a weight of 3400 g.

What is the height of the Canon imageFORMULA DR-M260?

The Canon imageFORMULA DR-M260 has a height of 231 mm.

What is the width of the Canon imageFORMULA DR-M260?

The Canon imageFORMULA DR-M260 has a width of 285 mm.

What is the depth of the Canon imageFORMULA DR-M260?

The Canon imageFORMULA DR-M260 has a depth of 254 mm.

What is the maximum scan size of the Canon imageFORMULA DR-M260?

The maximum scan size of the Canon imageFORMULA DR-M260 is 216 x 356 mm. This means it can accommodate documents up to this size, providing versatility for various scanning needs.

Does the Canon imageFORMULA DR-M260 have duplex scanning?

Yes, the Canon imageFORMULA DR-M260 has duplex scanning capabilities. This allows the scanner to automatically scan both sides of a document without the need for manual intervention, saving time and effort for the user.

How many greyscale levels does the Canon imageFORMULA DR-M260 support?

The Canon imageFORMULA DR-M260 supports 256 greyscale levels. This high level of detail in capturing shades of grey ensures accurate reproduction of images and documents, enhancing overall scan quality.

What is the daily duty cycle (max) of the Canon imageFORMULA DR-M260?

The daily duty cycle (max) of the Canon imageFORMULA DR-M260 is 7500 pages. This indicates the scanner's capability to consistently handle a high volume of scanning tasks, making it suitable for demanding environments.

What types of scanning media are supported by the Canon imageFORMULA DR-M260?

The Canon imageFORMULA DR-M260 supports various scanning media types, including Business Card and Plastic Card. This versatility allows users to easily scan different types of documents, such as ID cards or business cards, expanding the range of applications for the scanner.

How do I connect the Canon imageFORMULA DR-M260 scanner to my computer?

To connect the Canon imageFORMULA DR-M260 scanner to your computer, follow these steps: 1. Make sure your computer is turned on and running. 2. Locate the USB cable that came with the scanner. 3. Connect one end of the USB cable to the USB port on the back of the scanner. 4. Connect the other end of the USB cable to an available USB port on your computer. 5. Turn on the scanner by pressing the power button, usually located on the front or top of the scanner. 6. Wait for your computer to recognize the scanner. It may take a few moments for the necessary drivers to install. 7. Once the scanner is recognized, you can start using it with your scanning software or application. Note: If you encounter any issues during the connection process, make sure the USB cable is securely connected and try using a different USB port on your computer. Additionally, ensure that you have the necessary drivers installed for the scanner. You can refer to the User Manual for more detailed instructions on driver installation if needed.

Why is the scanner not turning on?

If the Canon imageFORMULA DR-M260 scanner is not turning on, you can try the following steps to troubleshoot the issue: 1. Confirm that the AC adapter is securely plugged into a power outlet. 2. Check if the power button on the front of the scanner is pressed. The power button should light up blue when the scanner is turned on. 3. Ensure that the scanner is properly connected to the computer using a USB cable. If not, reconnect the USB cable securely. 4. If the scanner is connected to a USB hub, try removing the hub and connecting the scanner directly to the computer. 5. Verify that the USB interface of your computer supports the scanner. Not all USB interfaces are compatible with the scanner. 6. If you are using a USB3.1 Gen1 interface, try reconnecting to a USB2.0 interface and check if the scanner is recognized. 7. If none of the above steps resolve the issue, contact your local authorized Canon dealer for further assistance. Please note that these troubleshooting steps are based on the information provided in the manual for the Canon imageFORMULA DR-M260 scanner.

How do I scan a document using the Canon imageFORMULA DR-M260 scanner?

To scan a document using the Canon imageFORMULA DR-M260 scanner, follow these steps: 1. Place the document on the scanner. Open the document eject tray and pull out the eject support. If you are scanning long documents, extend the document eject extension support to match the length of the documents. Stand the eject stopper at the end of the eject support if necessary. 2. Configure the scanning settings on your computer. This can be done through the scanning software or application that you are using. Set the desired resolution, file format, and other scanning parameters. 3. Click the [SCAN] button on the scanning software or application. The scanner will start scanning the document. The number of pages scanned will be displayed during the scanning process. 4. Once the scan is finished, the scanned image preview screen will open. You can preview the scanned image and make any necessary adjustments or edits. 5. If you frequently use the same scanning settings, you can save them as a shortcut for future use. Click the [Save to Shortcut] button to add the selected document and output settings to the scanning shortcut panel. Note: Make sure that your computer has sufficient memory to handle the scanning process. If you encounter any errors or issues during scanning, stop the process, adjust the scanning conditions, and try scanning again. Additionally, be aware that a multiple-page scan cannot be saved if it exceeds a file size of 2 GB. These steps are based on the information provided in the manual for the Canon imageFORMULA DR-M260 scanner.

Why is the scanned image quality poor?

The poor scanned image quality with the Canon imageFORMULA DR-M260 scanner can be attributed to several factors. Here are some possible solutions to improve the image quality: 1. Check the scanning conditions: Ensure that the scanning settings, such as color mode, page size, and resolution, are appropriate for the document you are scanning. Adjust these settings if necessary. 2. Verify the document placement: Make sure the document is properly aligned and placed on the scanner. Ensure that the document is flat and free from wrinkles or folds. 3. Clean the scanner: Dust or debris on the scanner glass or rollers can affect the image quality. Clean the scanner glass and rollers using a soft, lint-free cloth. 4. Enable image enhancement features: Use the image control options provided by the scanner software to reduce color unevenness, adjust line thickness, and enhance text readability. 5. Use carrier sheets for special documents: For documents on thick paper or passports, use carrier sheets provided with the scanner. This helps ensure proper scanning and prevents image distortion. 6. Check memory availability: Insufficient memory on your computer may cause scanning to stop or result in poor image quality. Close unnecessary applications and free up memory before scanning. If the image quality issue persists after following these steps, consider contacting your local authorized Canon dealer for further assistance.

What should I do if the scanner is not feeding the documents properly?

If the Canon imageFORMULA DR-M260 scanner is not feeding documents properly, you can try the following steps to troubleshoot the issue: 1. Check the document placement: Ensure that the documents are placed correctly on the scanner. Align the documents properly and adjust the document guides to fit the width of the document. Make sure there are no paper clips, staples, or other small metal objects that could cause a paper jam or scanner malfunction. 2. Verify the condition of the documents: Smooth out any folds or curls in the documents before placing them into the feeder. Curled or damaged documents may cause feeding issues or paper jams. 3. Clean the scanner rollers: Dust or debris on the scanner rollers can affect the document feeding. Use a soft, lint-free cloth to clean the rollers. Be careful not to cut your hand on the edges of the paper while cleaning. 4. Adjust the feed support and extension: Pull out the feed support and open the feed extension support when scanning long documents. Ensure that the documents are placed facing down with the top edge towards the feeder. 5. Check for system errors or paper jams: If feeding stops due to a system error or paper jam, resolve the problem, ensure that the scanned image of the last successfully fed page is stored, and then resume scanning the remaining document pages. By following these steps, you should be able to troubleshoot and resolve issues with the document feeding on the Canon imageFORMULA DR-M260 scanner.

Is the manual of the Canon imageFORMULA DR-M260 available in English?

Yes, the manual of the Canon imageFORMULA DR-M260 is available in English .

Is your question not listed? Ask your question here

No results