As the rollers start to wear out, feeding quality declines, and document feed errors, such as paper jams, become more likely.
If document feed errors continue to occur after cleaning the rollers, purchase the Roller Replacement Kit and replace the transport
rollers (pickup, feed, and retard rollers).
Roller Replacement Cycle
The feeding rollers are consumables that must be replaced after feeding about every 250,000 pages.When the rollers have fed more than 250,000 pages, a roller replacement message appears on the display panel whenever the scanner is turned ON. When the scanner is configured to reboot with the computer, a roller replacement message also appears on the computer screen.IMPORTANT
•When the roller replacement message appears, purchase the
Roller Replacement Kit and replace the rollers by following the
relevant steps in the removing and reinstalling procedures.
–(See “Removing and Reinstalling the Pickup Roller” on p. 5-7.)
–(See “Removing and Reinstalling the Feed Roller” on p. 5-8.)
–(See “Removing and Reinstalling the Retard Roller” on
p. 5-10.)
•When the rollers start to wear out, problems such as paper jams
and document misfeeds may occur more frequently. If this
happens, replace the rollers, regardless of the page count of the
roller usage counter.
•Messages on the display panel can be cleared by pressing the
Count Clear key. However, the messages will continue to be
displayed each time the scanner is turned ON until the roller
counter is reset.
•Make sure to reset the roller counter when replacing the rollers.
(See “Checking and Resetting the Page Counter” on p. 5-5.)
■ Roller Replacement Kit
The Roller Replacement Kit consists of replacement pickup, feed, and retard rollers. For details, contact your local authorized Canon dealer or service representative.Product Name: Roller Replacement KitProduct Code: 4009B001
Checking and Resetting the Page Counter
The roller usage counter can be checked and reset using the Roller Counter in the User Mode setting.IMPORTANT
•This counter shows the number of pages transported by the
currently installed feed rollers. Make sure to reset the counter
when you replace the rollers.
•The Total Counter shows the total number of pages fed over the
life of the scanner, and cannot be reset.
Pickup Roller
Feed Roller
Retard Roller
View the manual for the Canon imageFORMULA DR-6050C here, for free. This manual comes under the category scanners and has been rated by 2 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon imageFORMULA DR-6050C or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFORMULA DR-6050C below.
Is the manual of the Canon imageFORMULA DR-6050C available in English?
Yes, the manual of the Canon imageFORMULA DR-6050C is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 1My scanner canon Dr 6050 c is showing a jam on a display. What should I do