This section describes how to use patchcode sheets with
CapturePerfect 3.0.
1. Print the patchcode sheets on a printer.
IMPORTANT
•Print (at original size) PATCH T (A4) and PATCH II (A4)
sheets on A4 paper, or PATCH T (LTR) and PATCH II (LTR)
on LTR paper.
•The scanner may not recognize the patchcodes if they are
enlarged or reduced.
2. Insert the patchcode sheet in front of the document
that you want to save as a separate file before
placing the documents on the scanner.
3. On the [Other] tab of the ISIS driver properties, select
[Patchcode] from the Batch Separation drop-down
list.
IMPORTANT
If the patchcode decoder is not installed, the [Patchcode] batch
separation setting is not displayed. (See “Batch Separation” on
p. 8-20.)
4. Perform scanning with batch separation enabled.
5. Set the [Type of batch separation] setting to [Scan,
Continue Scanning] or [Skip, Continue Scanning].
Hint
•If [Scan, Continue Scanning] is selected or if the patchcode is
PATCH ll type, the patchcode sheet image is also saved and
scanning continues.
•If [Skip, Continue Scanning] is selected and the PATCH T
pattern is detected, the patchcode sheet image is not saved
and scanning continues.
Insert patchcode sheets in front of
the documents you want to save as
separate files.
View the manual for the Canon imageFORMULA DR-6050C here, for free. This manual comes under the category scanners and has been rated by 2 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon imageFORMULA DR-6050C or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFORMULA DR-6050C below.
Is the manual of the Canon imageFORMULA DR-6050C available in English?
Yes, the manual of the Canon imageFORMULA DR-6050C is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 1My scanner canon Dr 6050 c is showing a jam on a display. What should I do