Canon imageFORMULA DR-6050C manual

Canon imageFORMULA DR-6050C
8.2 · 2
PDF manual
 · 154 pages
English
manualCanon imageFORMULA DR-6050C
3-2

Chapter 3 Basic Operation

1. Turning the Power ON and OFF

Use the power switch to turn the scanner ON and OFF, or if you are using a USB connection, you can set the USB-linked power
switch.
CAUTION
After turning the scanner OFF, wait at least ten seconds before turning it back ON.
If the scanner is connected via SCSI cable, always turn the scanner ON before turning the computer ON. If you turn the computer ON before
the scanner, it may not recognize the scanner properly.

About the Power Switch

The power switch is located at the lower left side of the front
of the scanner. Press the power switch to turn the scanner ON.
(See p. 3-6.)
Press the power switch again to turn the scanner OFF.
Hint
In the User Mode, if the tray position is set to a height other than the
lowest position, then the Document Feed Tray moves up and down
when the power is turned on. In this case, the Document Feed Tray
is lowered once to the lowest position and then moves to the
configured height. When the power is turned off, the Document
Feed Tray does not move and stays at the configured height. (See
p. 3-6.)
IMPORTANT
When connecting the scanner to the computer using a SCSI
cable, be sure to turn ON the scanner first, and then turn ON the
computer. If you turn ON the computer first, the scanner may not
be properly recognized by the computer.
After turning the scanner OFF, wait at least 10 seconds before
turning it ON again.
If you will not be using the scanner for an extended period,
disconnect the power cord from the AC outlet for safety.
Power Switch

View the manual for the Canon imageFORMULA DR-6050C here, for free. This manual comes under the category scanners and has been rated by 2 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Canon imageFORMULA DR-6050C or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
M
Milton February 22, 2023

My scanner canon Dr 6050 c is showing a jam on a display. What should I do

General
BrandCanon
ModelimageFORMULA DR-6050C | 3624B002
Productscanner
EAN0013803109979
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Maximum scan size305 x 432 mm
Color scanningYes
Optical scanning resolution600 x 600 DPI
Grayscale levels256
Input color depth24 bit
Film scanningNo
Duplex scanningYes
Design
Scanner typeSheet-fed scanner
Performance
Sensor typeCMOS
Ports & interfaces
Standard interfacesUSB 2.0
USB portYes
USB version2.0
Packaging content
Bundled softwareISIS/TWAIN Drivers, CapturePerfect 3.0
System requirements
Mac compatibilityNo
Compatible operating systemsWindows 2000/XP/Vista
Power
Power consumption (typical)83 W
Power consumption (standby)2.7 W
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFORMULA DR-6050C below.

Is the manual of the Canon imageFORMULA DR-6050C available in English?

Yes, the manual of the Canon imageFORMULA DR-6050C is available in English .

Is your question not listed? Ask your question here

No results