Printing DirectionUnidirectional with friction feed
Dot Density8 dot/mm
Paper Feeding Pitch0.125 mm
Cutter MethodFull cut / Partial cut
Max Print WidthAbout 72 mm
Print SpeedUp to 150 mm/sec.
InterfaceUSB 2.0 Full speed (12 Mbps)
Operating
Temperature
0 to 40°C (32 to 104°F)
7.5 to 32.5°C (45.5 to 90.5°F)
(Print Quality assurance)
Operating Humidity30 to 85% RH (no dew condensation)
Storage Temperature-30 to 50°C (-21 to 122°F)
Storage Humidity10 to 90% RH (no dew condensation)
Dimensions135 mm (H) x 170 mm (W) x 280 mm (D)
(5.31" (H) x 6.7" (W) x 11" (D))
Weight1530 g (3.4 lb)
Power SupplyAC 100-240V 50/60Hz
Power ConsumptionPrinting: Maximum 55W
Sleep mode*: 0.7W
*This printer will automatically enter sleep
mode after a certain amount of time passes
without operation.
With power switch OFF: 0.4W
TypeThermal Roll Paper
Width80+0, -1 mm
Outer DiameterUp to φ83 mm
Inner Diameterφ8 mm or more
Thickness60 to 100 µm
Top board (Product Code: 3107C001)
This is an accessory used for installing a CR-50/80 Check Scanner on
the printer.
View the manual for the Canon imageFormula CR-80 here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Canon imageFormula CR-80 or do you need help? Ask your question here
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0