Canon imageFormula CR-80 manual

Canon imageFormula CR-80
5.7 · 1
PDF manual
 · 37 pages
English
manualCanon imageFormula CR-80
32

Others

• When using a UV lamp frequently, take extra care about paper
shrinking due to heat (in the feeding/sub-feeding (paper width)
directions), or about color fogging.
• The paper surface is slippery. Apply slightly stronger drive roller
pressing force.
• If you want a higher PCS value for the mark for position detection,
perform overprinting.
• Depending on the type of preprinted paper, sticking, etc. may
occur. Make sure to evaluate such phenomena using the printer
that you actually use.

A Press and hold the Power Button to turn OFF the power.

B Press the Power Button while pressing the Feed Button to

turn ON the power.

The test print starts. The test print is performed repeatedly until
you stop it.

C Press the Feed Button to stop the test print.

NOTE
The test print stops if a printer error such as “Paper End” or “Paper Cover
Open” etc. occurs. Once the error is cleared, the test print resumes.

Test Print

a. 50% checkered pattern printed
(2 lines)
b. 25% checkered pattern printed
(3 lines)
c. Status of the internal settings printed
The statuses of the interface settings
and other advanced settings are
printed.
d. Japanese character set (12 x 24)
(a complete set)
e. Standard character set (12 x 24)
(a complete set)
f. International character set (12 x 24)
(a complete set)
g. Japanese character set (08 x 16)
(a complete set)
h. Standard character set (08 x 16)
(a complete set)
i. International character set (08 x 16)
(14 lines)
j. Kanji (24 x 24) (15 lines)
k. 100-dot feed, partially cut
l. 160-dot feed, fully cut

View the manual for the Canon imageFormula CR-80 here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Canon imageFormula CR-80 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelimageFormula CR-80 | 5368B002
Productscanner
EAN13803140118, 0013803140118, 0138031401180
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Maximum scan size108 x 228 mm
Optical scanning resolution600 x 600 DPI
Color scanningYes
Duplex scanningYes
Input color depth- bit
Output color depth24 bit
Film scanningNo
Design
Scanner typeFlatbed & ADF scanner
Product colorGrey, White
Performance
Sensor typeCMOS CIS
Light sourceRGB LED
Daily duty cycle (max)5000 pages
Input capacity
Standard input capacity50 sheets
Auto document feeder (ADF) input capacity50 sheets
Ports & interfaces
Standard interfacesUSB 2.0
USB portYes
USB version2.0
System requirements
Windows operating systems supportedYes
Compatible operating systemsWindows XP\nWindows Vista\nWindows 7
Mac compatibilityNo
USB requiredYes
Weight & dimensions
Width140 mm
Depth224 mm
Height188 mm
Weight2000 g
Power
Power consumption (typical)20.4 W
Power consumption (standby)4.7 W
Packaging content
Drivers includedYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFormula CR-80 below.

What is the weight of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a weight of 2000 g.

What is the height of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a height of 188 mm.

What is the width of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a width of 140 mm.

What is the depth of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a depth of 224 mm.

Is the manual of the Canon imageFormula CR-80 available in English?

Yes, the manual of the Canon imageFormula CR-80 is available in English .

Is your question not listed? Ask your question here

No results