Canon imageFormula CR-80 manual

Canon imageFormula CR-80
5.7 · 1
PDF manual
 · 37 pages
English
manualCanon imageFormula CR-80
31

Appendix

When preprinting paper with the mark for position detection or a logo,
note the following precautions.

About Mark For Position Detection

Print the mark for position detection on the heat-sensitive side of
paper, as shown in the illustration below. The mark size should be
5 ± 0.5 mm in height × 10 mm in width or greater.
The mark should be black, with reflection density of 7% or smaller
and a PCS value of 0.9 or greater.
When printing the mark, use oil ink. Make sure that the mark has
uniform ink density.
Also, it is recommended that you overprint the mark to have a higher
PCS value.

About Mark Detection Area

Do not print anything other than the mark for position detection in the
mark detection area (10 mm in width starting from the right edge of
paper). If you have no other choice, however, select the type of ink so
that reflection density is 80% or greater in the operating wavelength
range of a photointerrupter (700 to 1000 nm).
Cautions About Preprinted Paper
Thermal paper has different characteristics than general printing
paper or carbonless copy paper. When printing on thermal paper,
note the following precautions.
Printing Method
Ink will dry slower on thermal paper. Use the UV printing method.
About Ink
Select the type of ink that has no adverse effects on the thermal
printer, such as ink residues that adhere to the printer, thermal
printhead wear and sticking.
Select the type of ink that contains 50 ppm or smaller Na and K ions
respectively, and 100 ppm CI ions.
Recommended ink: T&K TOKA RNC type
The surface intensity of the thermal layer is weaker than that of
general printing paper. Take extra care about ink's Total Area
Coverage (TAC). Make sure that ink's TAC values are
approximately 6.0 for general thermal paper and are comparable to
those of carbonless copy paper for long term storage thermal
paper. However, ink will dry slower if the TAC values are lowered by
a reducer. Keep the amount of adding a reducer to 5% or smaller.
Do not use too much ink. Doing so may result in poor coloring
performance or sticking when printing from the printer.
Use ink materials that are heat resistant and have no heat reducing
effects. Also, use similar ink for the non heat-sensitive side.
After printing, check that ink has adhered firmly to paper.
Additionally, UV ink is generally susceptible to emulsification. Take
extra care when managing dampening solution.
Make sure that ink does not show through on the back side of paper
and there is no ink blocking.
Make sure that ink will not come off due to water, alcohol, etc.
About Dampening Solution
Thermal paper tends to repel water. Take extra care when managing
dampening solution.
Isopropyl alcohol (IPA) contained in dampening solution is likely to
trigger color fogging if it is too much. Keep it to 5% or smaller for
general thermal paper, and 10% or smaller for long term storage
thermal paper.

About Preprinted Paper

Leading edge
Mark
Mark detection area
10 mm or greater
Heat-sensitive side
5 ± 0.5 mm

View the manual for the Canon imageFormula CR-80 here, for free. This manual comes under the category scanners and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Canon imageFormula CR-80 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelimageFormula CR-80 | 5368B002
Productscanner
EAN13803140118, 0013803140118, 0138031401180
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Maximum scan size108 x 228 mm
Optical scanning resolution600 x 600 DPI
Color scanningYes
Duplex scanningYes
Input color depth- bit
Output color depth24 bit
Film scanningNo
Design
Scanner typeFlatbed & ADF scanner
Product colorGrey, White
Performance
Sensor typeCMOS CIS
Light sourceRGB LED
Daily duty cycle (max)5000 pages
Input capacity
Standard input capacity50 sheets
Auto document feeder (ADF) input capacity50 sheets
Ports & interfaces
Standard interfacesUSB 2.0
USB portYes
USB version2.0
System requirements
Windows operating systems supportedYes
Compatible operating systemsWindows XP\nWindows Vista\nWindows 7
Mac compatibilityNo
USB requiredYes
Weight & dimensions
Width140 mm
Depth224 mm
Height188 mm
Weight2000 g
Power
Power consumption (typical)20.4 W
Power consumption (standby)4.7 W
Packaging content
Drivers includedYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon imageFormula CR-80 below.

What is the weight of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a weight of 2000 g.

What is the height of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a height of 188 mm.

What is the width of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a width of 140 mm.

What is the depth of the Canon imageFormula CR-80?

The Canon imageFormula CR-80 has a depth of 224 mm.

Is the manual of the Canon imageFormula CR-80 available in English?

Yes, the manual of the Canon imageFormula CR-80 is available in English .

Is your question not listed? Ask your question here

No results