Canon i-SENSYS MF212w manual

Canon i-SENSYS MF212w
9.9 · 1
PDF manual
 · 383 pages
English
manualCanon i-SENSYS MF212w
If a DNS server is located on a network that is connected to the machine and the information about the devices that are
connected to an external network is registered to the DNS server, check whether the settings are correct.

When the machine cannot connect to the wireless LAN

Check the status of your computer.
Have the settings of the computer and the wireless router been completed?
Are the cables of the wireless router (including the power cord and LAN cable) correctly plugged in?
Is the wireless router turned on?
If the problem persists even after checking the above:
Turn off the devices, and then turn them on again.
Wait for a while, and try again to connect to the network.
Check whether the machine is turned ON.
If the machine is turned ON, turn it OFF, and then turn it back ON.
Check the installation site of the machine and the wireless router.
Is the machine too far from the wireless router?
Are there any obstacles such as walls between the machine and the wireless router?
Are there any appliances such as microwave ovens or digital cordless phones that emit radio waves near the
machine?
Perform one of the following settings again.
Setting Up Connection Using WPS Push Button Mode
Setting Up Connection Using WPS PIN Code Mode
Setting Up Connection by Selecting a Wireless Router
Setting Up Connection by Specifying Detailed Settings

When you need to manually set up the connection

If the wireless router is set as described below, manually enter all the required information for the wireless LAN connection
(
Setting Up Connection by Specifying Detailed Settings).
ANY connection refusal is activated.
The WEP key that was automatically generated (hexadecimal) is selected.
The stealth mode is activated.
A function in which the wireless router refuses the connection if the SSID on the device to be connected is set to "ANY" or is blank.

When you need to change the settings of the wireless router

If the wireless router is set as described below, change the settings of the router.
The MAC address packet filtering is set.
When only IEEE 802.11n is used for the wireless communication, WEP is selected or the WPA/WPA2 encryption method is set
to TKIP.
*
*

㻞㻢㻞㻌㻛㻌㻟㻟㻢

View the manual for the Canon i-SENSYS MF212w here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Canon i-SENSYS MF212w or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Canon i-SENSYS MF212w is a printer designed for home or small office use. It offers printing, scanning, and copying capabilities in one compact machine. The printer is equipped with wireless connectivity, allowing for easy printing from various devices. It has a printing speed of up to 23 pages per minute and a maximum resolution of 1200 x 1200 dpi for high-quality prints. The printer supports various paper sizes and types, making it versatile for different printing needs. Additionally, it features automatic duplex printing for convenient two-sided printing. The Canon i-SENSYS MF212w has a user-friendly interface with a tiltable control panel for easy operation. It also includes energy-saving features such as automatic shutdown and low power consumption in sleep mode. Overall, the Canon i-SENSYS MF212w is a reliable and efficient printer for everyday printing tasks.

General
BrandCanon
Modeli-SENSYS MF212w
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon i-SENSYS MF212w below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Canon i-SENSYS MF212w available in English?

Yes, the manual of the Canon i-SENSYS MF212w is available in English .

Is your question not listed? Ask your question here

No results