Canon DP-V2730 manual

Canon DP-V2730
8 · 1
PDF manual
 · 106 pages
English
manualCanon DP-V2730
OSD Menu
68

Network/IMD Settings

Sub Menu Setting Options (Bold: factory default)
LAN Conguresvideodisplay'snetworksettings.
• Cannotbesetwhen[PoweronSetting]is[User1]to[User3].
CongureanIP
Address
Automatic
Manual
[Automatic]:ConguresanIPaddressautomaticallywithDHCP/AutoIP.
[Manual]:CongureanIPaddressandsubnetmaskmanually.
Display 192.168.0.1
SubnetMask 255.255.255.0
Web SettingsforoperatingthisdeviceremotelyusingaWebbrowser.( 18)
Control On,Off Setwhetherornottoreceivecontrolsignalsfromanexternaldevice,
connectedusingnetworkconnection,inordertooperatethevideodisplay
remotelyfromthedevice'swebbrowser.
UserID EntertheuserID.Thisissetusingupto16alpha-numericalcharactersandsymbols.Thedefault
userIDis[user].
Password Enterthepassword.Thisissetusingbetween8and16alpha-numericalcharactersandsymbols.
Thedefaultpasswordistheserialnumber.Theserialnumberistheindividual12-digitnumber
assignedtoyourproduct,andcanbecheckedonthe[SystemInformation]screen.
DisplaySettingLink Adjustment
Channel
Adjustment/Channel
Off
SettingsarelinkedbetweendisplaysconnectedviaLAN. Thisdevice's
settingvaluesareappliedtoalllinkeddisplays.
*Beforelinkingsettings,checkthatthefollowingconditionsaremet.
a
Turnonthepowertothisdisplayandthedisplay(s)tolinkwith,and
checkthattheyareallrecognizedonthenetwork
b
Changetheadjustmentorchannelandcheckthattheotherdisplay(s)
alsochange
Thedevicesandrmwareversionsthatcanbelinkedareshownbelow.
DP-V1830:Version1.1orhigher
DP-V2730:Version1.0orhigher
DisplaysnotconnectedcanberemovedwiththeRESETbutton.
• Operatingthebuttonsonthisdisplaywillreectsettingvaluechanges
inall.LinkedoperationsusingPayloadID,HDMI,Camera,etc.willnot
reectthesettingschanges.
• Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsetting
ranges,somesettingswillnotbecorrectlyexported(settingswillnotbe
changed,willreverttofactorydefaults,etc.)
• Inanenvironmentwherecommunicationcannotbedoneproperly,
suchaswhenthenetworkenvironmentisunstableorthebandwidthis
insufcient,settingsmaynotlinkproperly.Onlyconnectdisplaystobe
controlledtotheLAN.IfaDisplayControllerisconnected,itmaynot
operateproperly.
• Ifthesettingofthedisplaytolinkwithis[PictureMode]
[Type] [Quad]
or[Dual],itmaynotoperate.
• Upto3displayscanhavetheirsettingslinked.

View the manual for the Canon DP-V2730 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Canon DP-V2730 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V2730
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V2730 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V2730 available in English?

Yes, the manual of the Canon DP-V2730 is available in English .

Is your question not listed? Ask your question here

No results