Canon DP-V1830 manual

Canon DP-V1830
9.4 · 1
PDF manual
 · 123 pages
English
manualCanon DP-V1830
Operating the Video Display
16

Checking Signal Information and Status of the Main Unit

Thevideodisplayisequippedwithabannerdisplayfunction.
1 Press the jog dial when the OSD menu is closed.
•Thechannelname,signalinformation,andstatusofthemainunitwillbedisplayedinthebanner.Itwill
automaticallydisappearafter6seconds.

Note

• Youcanselecthowthebannerisdisplayed([Banner] 71).
• Youcanmonitortheinputsignalstatus.([SignalMonitoring] 59)
• Formoredetailedsignalinformation,pleaserefertothesectionon[SignalInformation]( 76).
• The[Detectingsync.]bannerwillcontinuetoappearuntiltheinputsignalissynchronized.

Operating the video display using an external device [GPI terminal]

YoucanoperatethevideodisplayusinganexternaldeviceconnectedtotheGPIterminalandexecutethefunctions
registeredineachpin.Remoteoperationispossibleonlywhenthevideodisplayisturnedon.
PinlayoutforGPIterminal
PinNo. Signal Factorydefault
1 Pin1 CH1
2 Pin2 CH2
3 Pin3 CH3
4 Pin4 TimeCode
5 Pin5 TallyGreen Atallyappearsatthe
topofthescreen.
6 Pin6 TallyRed
7 Pin7 PowerOn
8 Pin8(GND)
1 Connect an external control device to the GPI terminal.
2 Select [System Settings] [GPI].
•Thepinselectionscreenwillbedisplayed.
3 Select a pin number and press the jog dial.
4 Select the function to assign.
•See[SystemSettings]( 70)intheOSDmenuforsettablefunctions.
5 Press the jog dial.
•Thesettingisconrmed.

View the manual for the Canon DP-V1830 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1830 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V1830
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1830 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V1830 available in English?

Yes, the manual of the Canon DP-V1830 is available in English .

Is your question not listed? Ask your question here

No results