Use a web browser to remotely operate the video display
A web browser can be used to remotely operate the video display using a computer terminal connected to the LAN
terminal or a portable terminal (43) connected via a Wi-Fi adapter to the USB terminal. From the device connected to
the network, you can change image quality settings or switch channels.
This function checks operation using the following web browsers.
•Safari (Apple)
•Google Chrome (Google)
※ * Correct operation cannot be guaranteed on all supported OS or web browser editions.
CAUTION
•Remember to change the initial settings for ID and Password when using this function.
Note
•Access is only possible from a single terminal.
•This function may not work if the video display is accessed using LAN and a Wi-Fi adapter, at the same time.
•Opening multiple pages in multiple tabs on the web browser can cause it to not function properly.
•Executing [Capture] in the [View] screen can cause the video on this video display to pause temporarily.
•Operating the video display itself while it is being accessed from a web browser can cause the network connection to be lost.
•A delay may occur in video display or in the various settings depending on the network environment and communication
conditions.
•The IP address can be checked in the [System Information] screen.
•The operation screen only displays English.
1 Connect external control devices via the network.
2 Open the [Web] menu.
[Network/IMD Settings] [Web]
3 Select [Control] [On] using the jog dial.
4 Select [User ID] and [Password] using the jog dial (
101).
•[User ID]: Enter the user ID. This is set using up to 16 alpha-numerical characters and symbols.
[Password]: Enter the password. This is set using between 8 and 16 alpha-numerical characters and symbols.
The following characters can be entered.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: _ or -
5 Start up a web browser on the device connected to a network.
6 Enter the IP address of this video display in the address bar.
•The remote operation screen is displayed on the web browser.
•When the basic authentication screen is displayed, enter the user ID and password.
7 When operation ends, close the web browser.
View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Canon DP-V1711 available in English?
Yes, the manual of the Canon DP-V1711 is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0