Canon DP-V1711 manual

Canon DP-V1711
7.2 · 1
PDF manual
 · 151 pages
English
manualCanon DP-V1711
Operating the Video Display
42

Operating the video display using an external device [LAN terminal]

The video display supports Television Systems Ltd.’s “TSL UMD Protocol Ver. 5.0”. You can operate the video display
using an external device connected to the LAN terminal and display characters and tally lights on the screen. There are
two tally lights, on the left and right. Up to 16 characters can be displayed.
Tally display (left) Character display Tally display (right)
1 Connect an external control device to the LAN terminal.
2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings.
3 Open the [In Monitor Display] menu.
[Network/IMD Settings] [In Monitor Display]
4 Select [Control]
[TSL Ver. 5.00] using the jog dial.
•This will allow operation from an external control device, and display characters and tally lights.
5 Select [Position] [Top] or [Bottom] using the jog dial.
•This sets the position where characters and tally lights will be displayed.

Note

• When [Multi View (Dual)] or [Multi View (Quad)] is displayed, set the [INDEX] setting to from [0x0001] to [0x0004].
• The port number for the controlling is fixed at "45000".
• With [In Monitor Display] you can also display user-selected characters on the screen. (
102)

View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V1711
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V1711 available in English?

Yes, the manual of the Canon DP-V1711 is available in English .

Is your question not listed? Ask your question here

No results