Canon DP-V1711 manual

Canon DP-V1711
7.2 · 1
PDF manual
 · 151 pages
English
manualCanon DP-V1711
Operating the Video Display
41

Checking Signal Information and Status of the Main Unit

The video display is equipped with a banner display function.
1 Press the jog dial when the OSD menu is closed.
•The channel name, signal information, and status of the main unit will be displayed in the banner. It will
automatically disappear after 6 seconds.

Note

• You can select how the banner is displayed ( 104).
[System Settings] [OSD Settings] [Banner]
• You can monitor the input signal status. (
90)
[Function Settings] [Signal Monitoring]
• For more detailed signal information, please refer to the section on [Signal Information] (
110).
• The [Detecting sync.] banner will continue to appear until the input signal is synchronized.

Operating the video display using an external device [REMOTE terminal

(GPI)]

You can operate the video display using an external device connected to the REMOTE terminal and execute the
functions registered in each pin. Remote operation is possible only when the video display is turned on.
Pin layout for REMOTE terminal
Pin No. Signal Factory default
1 Pin1 CH1
2 Pin2 CH2
3 Pin3 CH3
4 Pin4 Time Code
5 Pin5 Tally Green
6 Pin6 Tally Red
7 Pin7 Power On
8 Pin8 (GND)
1 Connect an external control device to the REMOTE terminal.
2 Open the [Remote(GPI)] menu.
[System Settings] [Remote(GPI)]
•The pin selection screen will be displayed.
3 Select a pin number using the jog dial and press it to determine the selection.
4 Select the function to assign using the jog dial.
•Please see [Remote(GPI)] ( 103) for settable functions.
5 Press the jog dial to determine the selection.
•The setting is confirmed.

View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V1711
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V1711 available in English?

Yes, the manual of the Canon DP-V1711 is available in English .

Is your question not listed? Ask your question here

No results