You can perform calibration using an external sensor, without using a computer.
The supported external sensors are Konika Minolta Display Color Analyzers CA-310 and CA-210. Be sure to also read
the instruction manual of the CA-310 and CA-210.
The video display can perform measurement or calibration of the display using the DP-V Color Adjustment software.
Refer to the Canon website for the DP-V Color Adjustment.
1 Connect the display color analyzer to the USB port of the main unit.
2 Select [User 1] to [User 7] and then open the [Calibration] menu.
1
[Adjustment] [Picture Mode] [User 1–7]
2
[Adjustment] [Detail Settings] [Calibration]
•Set each target value.
3 Press the jog dial and select [Start].
•Please follow the information indicated on the screen.
4 Initialize the sensor.
•Set the mode dial of the Universal Measuring Probe to [0-CAL].
•Press the jog dial of the video display, select [OK], and execute initialization.
5 Place the universal measuring probe pointing at the center of the video display.
•Set the mode dial of the universal measuring probe to [MEAS] and place the probe as shown below according to
the displayed content. Press the jog dial of the video display, select [OK], and execute calibration.
Konica Minolta Universal Measuring Probe
CA-310 support: CA-PU32, CA-PU35
CA-210 support: CA-PU12, CA-PU15
Konica Minolta
Display Color Analyzer CA-310, CA-210
Main Unit
6 Finish calibration.
•When the message [Calibration is completed.] is displayed, press the jog dial and select [OK].
•If the message [Calibration error.] is displayed.
Calibration has been terminated due to an error. The main unit returns to the state before calibration. (
133)
•To cancel calibration
Press the jog dial during calibration and select [Cancel]. The main unit returns to the state before calibration.
View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Canon DP-V1711 available in English?
Yes, the manual of the Canon DP-V1711 is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0