Adjust image quality on left/right side of screen (image comparison mode)
You can divide the screen in two and adjust the image quality on the left and right sides of the screen individually.
1 Open the [Type] menu.
[Channel Settings] [Picture Mode] [Type]
•Select [L/R].
2 Select the screen to adjust image quality.
•When the OSD menu is opened:
-
Press the in the jog dial when the [Adjustment] main menu is selected.
-
Press the CH1 button when the [Adjustment] main menu or sub menu is selected.
•When the OSD menu is closed: Switch using the jog dial (
).
•Each time the target screen is switched, the set [Picture Mode] is displayed at the top.
3 Adjust the image quality on the selected screen.
Note
•When in Image Comparison mode, an icon showing which screen (L/R) is selected for image quality
adjustment will be displayed at the right top of the [Adjustment] menu screen.
•The functions that cannot be used when the right screen is selected are as follows.
-
Sub Menu items for [Adjustment]: [Contrast], [Backlight Control], [Boost Contrast] , [HDR/SDR View], [Calibration]
•When two screens are displayed, you can adjust the image quality on each screen individually and compare them.
-
When two screens are displaying the same image ([Single Input Dual View] 72)
-
When two screens are displaying different images ([Multi View (Dual)] 70)
-
You can check HDR (High Dynamic Range) display and SDR (Standard Dynamic Range) display side-by-side. ([HDR/SDR View]
60)
Changing the screen display area
When a video signal of 4096x2160 or 2048x1080 is input, the left and right parts will be trimmed for display.
1 Open the [Image Division] menu.
[Channel Settings] [Image Division]
•Once [Square Division] has been selected, press the jog dial to determine the selection.
2 Open the [Screen Scaling] menu.
[Display Settings] [Screen Scaling]
•Once either [Native] has been selected, press the jog dial to determine the selection.
3 Press the jog dial ( ) while the OSD menu is closed.
•Shifts to the left or right.
View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Canon DP-V1711 available in English?
Yes, the manual of the Canon DP-V1711 is available in English .
Need help?
Do you have a question about the Canon and is the answer not in the manual?
Question and answer
Number of questions: 0