Canon DP-V1711 manual

Canon DP-V1711
7.2 · 1
PDF manual
 · 151 pages
English
manualCanon DP-V1711
Operating the Video Display
29

Temporarily Saving Parameters (Anchor Point Setting)

You can temporarily save parameters for [Contrast], [Brightness], [Chroma], [Sharpness], and [HDR Range]. See 58 for setting anchor points during CDL adjustment.
1 Open the [Anchor Adjustment] menu.
[Adjustment] [Anchor Adjustment]
2 Press the jog dial, and when the confirmation screen appears, select [OK].
•The parameter is saved and the anchor point is set.
3 Adjust the image quality again and press the RESET button on the video display.
•Returns you to the anchor point for each function.
Current valueLast used value
Anchor point
Note
• Executing [Adjustment] [Reset] or [System Settings] [Reset All Settings] resets saved anchor points and the settings return
to their factory default values.
• When calibration is executed, the values are saved as anchor points.

Enlarging the display (Zoom function) ( 75)

The zoom display position can be adjusted, and the zoom magnification (2x, 4x, 8x) can be selected.
1 Open the [Zoom] menu.
[Display Settings] [Zoom]
2 Select [Zoom Preset] using the jog dial.
•Select a preset zoom display.
3 Select [Position] using the jog dial.
•The zoom adjustment screen is displayed.
-
To move the display position: Move the jog dial ( or rotation).
-
To return to the center: Press the RESET button.
4 When adjustments are completed, press the jog dial.
•The screen returns to the original OSD menu.
Note
• When magnifying the image and the OSD menu is not being displayed,
-
you can set the magnification ratio by pressing the jog dial.
-
You can move the display location by moving the jog dial ( or rotation).
-
You can set the following functions using the CH button:
CH1: Select zoom type; CH2: Switch between zoom presets (Zoom 1/Zoom 2/Zoom 3); CH3: Zoom off
Zoom 2 [x4]

View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V1711
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V1711 available in English?

Yes, the manual of the Canon DP-V1711 is available in English .

Is your question not listed? Ask your question here

No results