Canon DP-V1711 manual

Canon DP-V1711
7.2 · 1
PDF manual
 · 151 pages
English
manualCanon DP-V1711
Operating the Video Display
27
4 Select the setting to change.
•Select the setting to change using the jog dial and press it to determine the selection. You will be returned to the Sub Menu item selection screen.
5 Exit menu.
•Pressing the MENU button will return you to the Main Menu item selection screen. Pressing the MENU button again will close the menu screen.

Note

• To adjust image quality, warming-up is necessary to stabilize the brightness of the video display. Wait at least 10 minutes after
turning on the power before using.
• The OSD menu and slider will disappear automatically if no operation is performed for approximately 1 minute. The F button will
disappear automatically if no operation is performed for approximately 10 seconds.
• The settings that cannot be set, are grayed out.
• The following functions can be returned to their factory default settings or their anchor point (
29) by pressing the RESET button,
after adjusting the image quality.
-
[Contrast], [Brightness], [Chroma], [Sharpness], [Power], [Saturation], [Offset], [Slope]
When [Picture Mode]
[User 1–7]: When executing calibration, pressing the RESET button while adjusting the image quality will
return you to the settings after calibration.

Adjusting Image Quality While Viewing the Entire Image

You can adjust the OSD menu to display as a slider at the bottom of the screen. This allows for the image quality to be adjusted whilst it is displayed on the screen.
1 Press the jog dial when the selection frame is on setting options.
•A slider appears at the bottom of the screen.
2 Make adjustments using the jog dial with using the slider as
guide.
3 When adjustments are completed, press the jog dial.
•The screen returns to the original OSD menu.

View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V1711
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V1711 available in English?

Yes, the manual of the Canon DP-V1711 is available in English .

Is your question not listed? Ask your question here

No results