Canon DP-V1711 manual

Canon DP-V1711
7.2 · 1
PDF manual
 · 151 pages
English
manualCanon DP-V1711
OSD Menu
103

System Settings

This menu is used to configure settings related the system of the video display.

Sub Menu Setting Options (Bold: factory default)
Function/Channel Button Sets the function or channel to assign to the F buttons or CH button.
Display Function/
Display Function (CDL)
Sets the function to assign to the F buttons of the main unit (
37). Select an F button and assign a
function from the following list (
108).
Display Channel Sets the channel to assign to the CH button on the display.
CH1 CH1 to CH20 (CH1) Select a CH button and register a channel number. A list of settings under
the menu [Channel Settings] (
69) is displayed.
CH2 CH1 to CH20 (CH2)
CH3 CH1 to CH20 (CH3)
Remote(GPI)
1
You can operate the video display using an external controller such as a switcher that has been
connected to the REMOTE terminal. Operates by connecting (shorting) the GND (No. 8 Pin) to No.s
1 to 7.
Type Level,
Short Edge
[Level]: Operates while shorted.
[Short Edge]: Switches between “operate”/”do not operate” for each
short.
Pin1 ~ Pin7 Assigns functions in each GPI pin. (
41)
Functions that can be registered
2
:
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, User 1 (2020 PQ),
User 2 (2020 HLG), User 3 (DCI PQ), User 4 (DCI PQ D65), User 5 ~ User 7, CINEMA EOS SYSTEM,
ACESproxy (ver. 1.0.1), CH1 to CH5, Aspect Marker, Safety Zone Marker 1/2, Area Marker,
Center Marker, Grid Marker, Time Code, Audio Level Meter, Wave Form Monitor, Vector Scope,
Histogram, Frame Luminance Monitor, False Color 1/2, Compare View, MENU, Tally Green,
Tally Red, Power On, — (Not set)
Functions with valid settings:
Aspect Marker, Safety Zone Marker 1/2, Area Marker, Center Marker, Grid Marker, Time Code,
Audio Level Meter, Wave Form Monitor, Vector Scope, Histogram, Frame Luminance Monitor,
False Color 1/2, Compare View
About [Tally]
A tally appears at the top of the screen. Combining [Tally Green] and [Tally Red] makes [Tally Amber].
Language English
日本語
简体中文
Sets the language of the OSD menu and messages.
Date/Time Sets the year/month/date/hour/minute.

View the manual for the Canon DP-V1711 here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Canon DP-V1711 or do you need help? Ask your question here

Need help?

Do you have a question about the Canon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCanon
ModelDP-V1711
Productmonitor
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Canon DP-V1711 below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Is the manual of the Canon DP-V1711 available in English?

Yes, the manual of the Canon DP-V1711 is available in English .

Is your question not listed? Ask your question here

No results